A 13.0 mL aliquot of a flouride sample solution was diluted to 250 mL in a volumetric flask. The F- concentration of this DILUTED sample was determined with a F- ion selective electrode and found to be 3.1 mg/L. What is the concentration of F- in the original, undiluted sample?
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
A 13.0 mL aliquot of a flouride sample solution was diluted to 250 mL in a...
15mL of an unknown sample of tap water was diluted in a 100mL volumetric flask with 0.1M acetate buffer. After using the Fluoride Ion selective electrode the result found was -36.9 mV. Calculate the concentration of F- (in mg L-1) in your tap water
You diluted a 12.96 ml vinegar sample into a 100 ml volumetric flask with distilled water. You titrated a 25.00 mL aliquot of that solution and determined the concentration of acetic acid to 0.048 M. What was the concentration of acetic in the original sample.
a 25.0 ml aliquot of vinegar was diluted to 250 ml in volumetric flask. Titration of 50.0 ml aliquots of diluted solution required an average of 34.88 ml of 0.09600 M NaOH. Express the acidity of the vinegar in terms of percentage (w/v) of acetic acid.
A 10.00-g sample that contains an analyte is transferred to a 250-mL volumetric flask and diluted to volume. When a 10.00 mL aliquot of the resulting solution is diluted to 25 ml it gives a signal of 0.235 (arbitrary units). A second 10.00 mL portion of the solution is spiked with 10.00 mL of a 1.00-ppm standard solution of the analyze and diluted to 25.00 mL. The signal for the spiked sample is 0.502. Calculate the weight percent of analyte...
A 15.00mL solution of unknown concentration is diluted to 250.00mL. A 10.00mL aliquot of the 250.00mL solution is analyzed with the spectrometer and the concentration of the solution is found to be 3.50x10^-2 mg/mL. What is the concentration of the original sample?
If 13.0 mL of a dye solution is diluted to 25.0 mL, what is the percent concentration of the diluted solution? (Consider the original solution to be 100%)
EBTA TItration Q3. A 1. volumetric flask. A 50.00-ml aliquot of the diluted solution was brought to a pH of 10.0 with a NH NH buffer; the subsequent titration involved both cations and required 28.89 ml of 0.06950 M EDTA. A secand 50.00-mL aliquot was brought to a pH of 10.0 with an HCN/NaCN buffer, which also served to mask the Cd? 11.56 mL of the EDTA solution were needed to titrate the Pb*, Calculate the percent Pb and Cd...
A chemist pipets 20 mL of a lithium sulfate solution into a 250 mL volumetric flask and dilutes to the mark. He analyzes the diluted solution and finds its concentration to be 0.0023 M Li 2SO 4. What was the concentration of the Li 2SO 4 in the original solution?
A 11.17 mg ore sample containing copper is digested with acid, filtered and transferred to a volumetric flask and diluted to exactly 200.00 mL. A 10.00 mL aliquot is transferred to a 100.00 mL volumetric flask containing zincon reagent and a quantity of a pH 9 buffer solution. It is then diluted to the mark and mixed thoroughly. The measured absorbance of the resulting blue solution at 600 nm was 0.326 which corresponded to a Cu(II) concentration of 0.498 ppm...
A 2.0 M stock solution of Tylenol was diluted as follows: 15.000 mL of stock solution was added to a 250-ml volumetric flask. Water was added to the flask until the solution's meniscus was at the line on the neck of the flask. 5.000 mL of solution from the 250-ml volumetric flask was added to a 100-ml volumetric flask. Water was added to the flask until the solution's meniscus was at the line on the neck of the flask. Calculate...