consider a network using packet switching, that consist of 4 routers and two host: Host A...
consider a network using packet switching, that consist of 4 routers and two host: Host A and Host B with distance between the two hosts is 10000 Km. assume every router has processing time = 2 s, and queueing time = 2 s. The speed of light = 2x108 m/s and all the links have a bandwidth of 5Mbps.
Calculate the queuing delay for the whole network.
Homework Answers
Add Answer to:
consider a network
using packet switching, that consist of 4 routers and two host:
Host A...
3. Suppose there is exactly one packet switch (or router) between a sending host and a...
3. Suppose there is exactly one packet switch (or router) between a sending host and a receiving host. The transmission rates between the sending host and the switch and between the switch and the receiving host are R1 = 1Mbps and R2 = 2Mbps, respectively. Assuming that the switch uses store-and-forward packet switching, what is the total end-to-end delay to send a packet of length 18000bits? Assume that the propagation speed is 2 * 108 meters/sec, the distance between source...
Note: b denotes bits and B denotes Bytes (1 Byte = 8 bits). Consider a packet...
Note: b denotes bits and B denotes Bytes (1 Byte = 8 bits). Consider a packet of length L, which begins at source and travels over seven links to a destination. These links are connected through six routers. Let di, si, and Ri denote the length, propagation speed, and the transmission rate of link i, for i = 1 to 7. The processing delay at each router is d-proc. The queuing delay at each router is d-que. What is the...
10. Suppose there is exactly one packet switch between a sending host and a receiving host....
10. Suppose there is exactly one packet switch between a sending host and a receiving host. The transmission rates between the sending host and the switch and between the switch and the receiving host are R1 and R2, respectively. Assuming that the switch uses store-and-forward packet switching, what is the total end-to- end delay to send a packet of length L? (Ignore queuing, propagation delay, and processing delay.) 11. Draw a sketch of computers and network routers and links, to...
3. Consider sending real-time data from Host A to Host B over a packet-switched network. Host...
3. Consider sending real-time data from Host A to Host B over a packet-switched network. Host A takes a 32-bit measurement every millisecond, and Host A collects these into 128-byte packets. There is one link between Hosts A and B; its transmission rate is 2 Mbps, its propagation delay is 2 × 108 meters/sec, and its length is 1500 km. As soon as Host A gathers a packet, it sends the packet to Host B. How much time elapses from...
1. What is end-system? List example of end-systems 2. Define network edge and network core 3....
1. What is end-system? List example of end-systems 2. Define network edge and network core 3. Explain Packet-switching 4. List five tasks that a computer network layer can perform Is it possible that one (or more) of these tasks could be performed by two (or more) layers? 5. This elementary problem begins to explore propagation delay and transmission delay, two central concepts in data networking. Consider two hosts, A and B, connected by a single link of rate R bps....
Host A is connected to Host B through a 100 Mbps link which has a propagation...
Host A is connected to Host B through a 100 Mbps link which has a propagation speed of 3 * 108 m/s, and the two hosts are 30 km apart. Assuming the network is not busy so that there are no processing or queueing delays, what is the end-to-end delay to send a 100 bit packet from Host A to Host B? (NOTE: Express your answer in milliseconds, i.e. msec and please show work.
Consider a packet switching network. Packets from origin host travel over H hops to reach the...
Consider a packet switching network. Packets from origin host travel over H hops to reach the destination host. Supppose that the origin host wants to transmit a message that is M bits long. The bit rate of all links is C (bits/sec), and the propoagation delay over every link is D seconds. The message will be broken into packets. Suppose that each packet has a constant overhead of V bits. Let L be the fixed payload of each packet. Thus,...
Problem 2 For a given network, the average packet length L = 1024 bytes, packets are...
Problem 2 For a given network, the average packet length L = 1024 bytes, packets are arriving with an average rate = 8 pakets/s, the network is used to support voice call services which can tolerate a maximum end-to-end delay of 150 ms, the average end-to-end distance between any two connected nodes in the network is 1000 km, the average phase velocity for signal travelling throughout the network links is 0.1 speed of light in free space and the call...
one important factor in the total delay of a store-and-forward packet-switching network is how long it...
one important factor in the total delay of a store-and-forward packet-switching network is how long it takes to store and forward a packet through a switch. If the switching time of each switching device is 1 microsecond, is this likely to be a major factor in the response of a client-server system where the client is a computer you use to access the internet, and the server is somewhere in Europe? Explain your answer. You can assume the average propagation...
Note: b denotes bits and B denotes Bytes (1 Byte 8 bits) Question 1: 32 points:...
Note: b denotes bits and B denotes Bytes (1 Byte 8 bits) Question 1: 32 points: (16)+(16) Source Destination Consider a packet of length L, which begins at source and travels over seven links to a destination. These links are connected through six routers. Let di, si, and Ri denote the length, propagation speed, and the transmission rate of link i, for i 1 to 7. The processing delay at each router is d-proc. The queuing delay at each router...
10. Suppose there is exactly one packet switch between a sending host and a receiving host. The transmission rates between the sending host and the switch and between the switch and the receiving host are R1 and R2, respectively. Assuming that the switch uses store-and-forward packet switching, what is the total end-to- end delay to send a packet of length L? (Ignore queuing, propagation delay, and processing delay.) 11. Draw a sketch of computers and network routers and links, to...
1. What is end-system? List example of end-systems 2. Define network edge and network core 3. Explain Packet-switching 4. List five tasks that a computer network layer can perform Is it possible that one (or more) of these tasks could be performed by two (or more) layers? 5. This elementary problem begins to explore propagation delay and transmission delay, two central concepts in data networking. Consider two hosts, A and B, connected by a single link of rate R bps....
Problem 2 For a given network, the average packet length L = 1024 bytes, packets are arriving with an average rate = 8 pakets/s, the network is used to support voice call services which can tolerate a maximum end-to-end delay of 150 ms, the average end-to-end distance between any two connected nodes in the network is 1000 km, the average phase velocity for signal travelling throughout the network links is 0.1 speed of light in free space and the call...
Note: b denotes bits and B denotes Bytes (1 Byte 8 bits) Question 1: 32 points: (16)+(16) Source Destination Consider a packet of length L, which begins at source and travels over seven links to a destination. These links are connected through six routers. Let di, si, and Ri denote the length, propagation speed, and the transmission rate of link i, for i 1 to 7. The processing delay at each router is d-proc. The queuing delay at each router...
Most questions answered within 3 hours.
-
Problem: Patient Fees C++
You are to write a program that computes a patient’s bill for...
asked 1 hour ago -
In a population of interest, we know that, 77% drink coffee, and
23% drink tea. Assume...
asked 1 hour ago -
Given that f(x) = e-(x-1) for x > 1, determine the following
probabilities:
a) P(X <...
asked 1 hour ago -
A mechanic pushes a 2.60 ✕ 103-kg car from rest to a speed of v,
doing...
asked 1 hour ago -
International information systems result in all of the following
except:
A. improved quality of information flow....
asked 1 hour ago -
The president of the retailer Prime Products has just approached
the company’s bank with a request...
asked 1 hour ago -
If the carrying amount is $200,000 and recoverable amount is
$205000, the impairment amount is:
Select...
asked 1 hour ago -
The correlation is inappropriate as a measure of association
between two quantitative variables (you may select...
asked 1 hour ago -
USE THE DATA IN THE TABLE BELOW TO ANSWER QUESTIONS 19 – 24
(Assume all account...
asked 1 hour ago -
Mahaley, Inc., manufactures and sells two products: Product Q9
and Product F0. Data concerning the expected...
asked 1 hour ago -
To measure the current through one branch of a parallel circuit,
the meter is connected ________....
asked 1 hour ago -
a)
The following table shows the profile, by the math section of
the SAT Reasoning Test,...
asked 2 hours ago