From a time series of 100 observations, we calculate r1 = −0.49, r2 = 0.31, r3 = −0.21, r4 = 0.11, and |rk| < 0.09 for k > 4. On this basis alone, what ARIMA model would we tentatively specify for the series?
From a time series of 100 observations, we calculate r1 = −0.49, r2 = 0.31, r3...
Calculate the equivalent resistance.
Vin R1: 30 R2: 100: R3 60 R4 80 R5 40 Vout
A circuit is constructed with four resistors, one inductor, one battery and a switch as shown. The values for the resistors are: R1 = R2 = 48 Ω, R3 = 100 Ω and R4 = 130 Ω. The inductance is L = 330 mH and the battery voltage is V = 12 V. The positive terminal of the battery is indicated with a + sign.1)The switch has been open for a long time when at time t = 0, the...
8. A simple circuit is composed of an ideal 100 v battery
in series with three resistors (R1 = 10Ω, R2 = 20Ω, R3 = 30Ω).
Which of the following statements is true?
Statement A: Each resistor carries the same current.
Statement B: Each resistor has the same voltage.
Statement C: Each resistor dissipates the same amount energy per
second.
Statement D: The battery power output is greater than the power
output of Resistor 1.
a. Only A is true....
(a) Design an inverting amplifier by choosing suitable resistor
values for R1 and R2 to produce a gain of 5 when both switches
Sw1 and Sw2 are open.
(b) Design the bias input circuit by choosing suitable resistors
R3 and R4 such that the voltage vb will be 0.5V if the
positive power supply of the op-amp is connected to a 5V battery.
Again both switches are open.
(c) Given Sw1 is open, the amplifier is turned on for
enough...
there are 3 parts to this question. The weight is 100 grams.
[Q2-Home/Lab...) We attach a known weight (~100 gr) to a spring. By pulling down the spring by no more a couple of cm put it in oscillating mode. This experiment is described here [the screencast can be played in the PH 114-LABORATORY MANUAL, OSCILLALTIONS, UAH PHYSICS 2020-2021 classroom in mute as long as you keep an eye to spot the information you need]. Get the data from this...
Answer 4 & 5 please! thank
you!
R values =
Resistor value, R1 = 990 Ohms
Resistor value, R2 = 2050 Ohms
4. Connect the 2nd resistor in parallel with the 1st
resistor and connect that combination to the battery.
Measure
the following:
The
current passing through the R1, I1 = ___0.0058____ A
The
current passing through the R2, I2 = ___0.0031____ A
The
current supplied by the battery, I = ___0.0092____ A
Calculate I1 + I2 =...
(100 points) Water at 25°C is pumped at a rate of 0.075m'/s from a reservoir 20m above a pump to a free discharge (this means discharged to atmosphere) 35m above the pump. The pressure on the intake side of the pump is 150kPa and the pressure on the discharge side of the pump is 450kPa. The pipe between the reservoir and the pump is 3 meters of 5in diameter cast iron. From the pump to the discharge the pipe is...
First, read the article on "The Delphi Method for Graduate Research." ------ Article is posted below Include each of the following in your answer (if applicable – explain in a paragraph) Research problem: what do you want to solve using Delphi? Sample: who will participate and why? (answer in 5 -10 sentences) Round one questionnaire: include 5 hypothetical questions you would like to ask Discuss: what are possible outcomes of the findings from your study? Hint: this is the conclusion....