A metal wire of diameter 1.00 mm can support a tension of 0.250 kN. A construction worker needs a cable made of these wires to support a tension of 20.0 kN. The cable should have diameter (in cm) of what order of magnitude?
~10
A metal wire of diameter 1.00 mm can support a tension of 0.250 kN. A construction...
An 80 cm long wire is made by welding a 1.8 mm diameter, 20 cm long copper wire to a 1.8 mm diameter, 60 cm long iron wire at normal room temperature (20 ∘C). When two wires are connected end to end, their resistances add together. The resistivity of copper is 1.68×10−8Ωm and the of iron is 1.00×10−7Ωm. The temperature coefficients are: copper = 0.0039/∘C and iron = 0.0050/∘C. What is the resistance of the iron section of wire?
An 80 cm long wire is made by welding a 1.8 mm diameter, 20 cm long copper wire to a 1.8 mm diameter, 60 cm long iron wire at normal room temperature (20 ∘C). When two wires are connected end to end, their resistances add together. The resistivity of copper is 1.68×10−8Ωm and the of iron is 1.00×10−7Ωm. The temperature coefficients are: copper = 0.0039/∘C and iron = 0.0050/∘C. What is the resistance of the copper section of wire?
P4. An aluminum wire of diameter 1.00 mm is put under a tension of 375 N. If a 440. Hz driving force sets up a wave that propagates along this wire, calculate the wavelength.
A metal wire having a diameter of 1.1390 mm and a length of 514.1 mm is deformed elastically in tension with a force of 1,660 N. Given that the elastic modulus and Poisson's ratio of the metal are 115 GPa and 0.3410, respectively, determine the change in diameter of the specimen (in mm). O-0.0257 mm -0.0492 mm -0.0055 mm -0.0107 mm Question 26 (1 point) Consider a natural gas pipeline. The pipeline is made of steel of thickness 2.00 cm....
A metal wire 1.4 mm in diameter and 2.1 m long hangs vertically with a 7.0-kg object suspended from it. If the wire stretches 1.6 mm under the tension, what is the value of Young's modulus for the metal?
What length of a certain metal wire of diameter 0.15 mm is needed for the wire to have a resistance of 15 ?? The resistivity of this metal is 1.68
A metal wire 1.3 mm in diameter and 2.5 m long hangs vertically with a 5.1-kg object suspended from it. Part A If the wire stretches 1.7 mm under the tension, what is the value of Young's modulus for the metal? Express your answer using two significant figures.
The maximum tension a wire of mass density 0.015g/cm can support without breaking is (a little bit more than) 400N. a) (5 points) You clamp down the ends of 150 cm of this wire and then pluck it. As the wire vibrates you start to increase the tension in the wire. What (lowest) note will be heard right before the wire breaks? b) (5 points) You place another piece of the wire (150 cm) between the clamps and set the...
[15] A 3 mm diameter wire of material A is coated with a 0.5 mm layer of material B in order to improve the interface properties with the body. Use the following data to answer the questions below. Material Density (g/cm3) Young's Modulus (GPa) 225 170 Yield Strength (MPa) 480 250 6.9 Α B 4.2 a) What is the Young's modulus of the composite? b) How much load (in N) can the composite carry in tension before plastic deformation occurs?...
A bare copper wire of 5.8 mm in diameter can carry a current of 53 A without overheating. For this current, what is the magnitude of the magnetic field (in mT) at the surface of the wire?