For the pipe system below, we assume the cross-section at A is subject to the resultant forces P ...
A long cylindrical pipe of diameter D 1.0 m and of wall thickness h 6 mm is subjected to load P, uniformly distributed along a circular cross section (Fig. 15.9) Determine the value of P required according to the Tresca criterion. Use Ơys-220 MPa, E-200 GPa, and v 0.3. A long cylindrical pipe of diameter D 1.0 m and of wall thickness h 6 mm is subjected to load P, uniformly distributed along a circular cross section (Fig. 15.9) Determine...
Three plates are joined with a 12 mm diameter pin as shown. Determine the maximum load P that can be transmitted by the joint if:(a)The maximum normal stress on a cross-section of the plates at the pin must not exceed 372 MPa.(b)The maximum bearing stress between a plate and the pin must not exceed 612 MPa.(c)The maximum shear stress on a cross-section of the pin must not exceed 268 MPa.(d)The punching shear resistance of the material in the top and...