Consider a 4 m high, 6 m wide and 0.17 m thick wall whose thermal conductivity is k = 0.8 W/m.oC....
Consider a 4 m high, 6 m wide and 0.17 m thick wall whose thermal conductivity is k = 0.8 W/m.oC. On a certain day, the temperatures of the inner and the outer medium close to the wall are measured to be 14oC and 6oC, respectively. Both inner and outer surfaces are subjected to convection heat transfer. Assume that the convection heat transfer coefficient is the same for the two surfaces h = 5 W/m2 ∙ °C.
1. Draw the network of the thermal resistances for the conductive and convective heat transfer through the wall.
2. Evaluate the thermal resistances for the conductive and convective heat transfer through the wall as well as the total thermal resistance.
3. Determine the rate of heat loss through the wall on that day.
Homework Answers
Add Answer to:
Consider a 4 m high, 6 m wide and 0.17 m thick wall whose thermal conductivity is k = 0.8 W/m.oC....
(25pts) Consider a 1.2-m-high and 2-m-wide glass window whose thickness is 6 mm and thermal conductivity...
(25pts) Consider a 1.2-m-high and 2-m-wide glass window whose thickness is 6 mm and thermal conductivity is k 0.78 W/m °C. Determine the steady rate of heat transfer through this glass window and the temperature of its inner surface for a day during which the room is maintained at 24°C while the temperature of the outdoors is-5°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h 10 W/m2 °C and h...
Quiz #5 [20 Points] Chapter 3 Electric Analogy - Thermal Resistance Network Consider a 0.8-m high...
Quiz #5 [20 Points] Chapter 3 Electric Analogy - Thermal Resistance Network Consider a 0.8-m high and 1.5-m-wide glass window with a pane thickness of 8-mm and a thermal conductivity of k = 0.78 W/m-°C. Determine the steady rate of heat transfer through the glass window and the temperature at the inner and the outer surfaces of the wall for a day during which the room is maintained at 20°C while the temperature of the outdoors is -10°C. Take the...
2.) A plane wall is made of brick with a thermal conductivity of 1.5 W/(m-K). The...
2.) A plane wall is made of brick with a thermal conductivity of 1.5 W/(m-K). The wall is 20 cm thick and has a surface area of 10 m2. One side of the wall is exposed to outside air blowing against the wall resulting in a heat transfer coefficient of 20 W/(m2-K). The other side is exposed to an air-conditioned room with a convective heat transfer coefficient of 5 W/(m2-K). a. What are the thermal resistances corresponding to conduction through...
Thermal Resistance Analysis: Consider a 1.2 m high and 1.4 m wide double-pane window consisting o...
Thermal Resistance Analysis: Consider a 1.2 m high and 1.4 m wide double-pane window consisting of two 4 mm thick layers ofglass (k-0.85 W m-K) separated by a 8-min stagnant air space. (k= 0.025 W m-K) Determine the steady rate of heat transfer through this double-pane window and the temperature of its inner and outer surfaces on a day when the inside room temperature is maintained at 20 °C and the outside ambient temperature is 32 °C. Assume the convection...
Consider a 1.2-m-high and 2-m-wide double-pane window consisting of two 3-mm-thick layers of glass (k =...
Consider a 1.2-m-high and 2-m-wide double-pane window consisting of two 3-mm-thick layers of glass (k = 0.78 W/m K) separated by a 12-mm-wide stagnant air space (k = 0.026 W/m K). Determine the steady rate of heat transfer through this double-pane window. R . and all the surface temperatures (inner and outer of each pane) within the circuit (which you will draw and correctly label) for a day during which the room is maintained at 24°C while the temperature of...
Consider an ocean-facing room in a high-rise building (L/W of 1). The ocean-facing wall (with window) is...
Consider an ocean-facing room in a high-rise building (L/W of 1). The ocean-facing wall (with window) is 10m by 4 m, contains two windows (3m by 1m, each). Assume the room is located 30 m above the neutral pressure level and the inside air temperature is maintained at 24°C with RH of 50%. Outside air is of 35°C with RH of 60%. Assume the convective heat transfer coefficients on inner side and outer side of the wall and window are 0.5 and...
Water flows through a 0.5 mm thick tube ( thermal conductivity of 16 W/m..C) with a...
Water flows through a 0.5 mm thick tube ( thermal conductivity of 16 W/m..C) with a inner diameter of 1.5 cm at 70°C such that the convective heat transfer coefficient is 3500 W/m² . •C. Let us consider the outside of the tube is 20oC and it loses heat by free convection with ho=7.6W/m² • •C. a. Draw the schematic diagram of the process b. Find out which one is the controlling resistance c. Calculate the overall heat-transfer coefficient per...
QUESTION 7 Consider a (1.25, 1.0, 1.3, 0.90)-m-high and (2.0, 2.1, 2.2, 2.3)-m-wide double-pane window (see...
QUESTION 7 Consider a (1.25, 1.0, 1.3, 0.90)-m-high and (2.0, 2.1, 2.2, 2.3)-m-wide double-pane window (see Figure below) consisting of two 3-mm-thick layers of glass (k = 0.79 W/m.°c) separated by a 12-mm-wide stagnant air space (k = 0.028 W/m-°C). The room is maintained at (20, 21, 22, 23, 24) °C while the temperature of the outdoors is (5, 6, 7, 8)°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1...
Considera (1.25, 1.0, 1.3, 0.90).m-high and (2.0, 2.1, 2.2, 2.3).m-wide double-pane window (see Figure below) consisting...
Considera (1.25, 1.0, 1.3, 0.90).m-high and (2.0, 2.1, 2.2, 2.3).m-wide double-pane window (see Figure below) consisting of two 3-mm-thick layers of glass (k = 0.79 W/m°c) separated by a 12-mm-wide stagnant air space (k -0.028 W/m.°c). The room is maintained at (20, 21, 22, 23, 24) ºc while the temperature of the outdoors is (5, 6, 7, 8)°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1 = 11 W/m2.0c and...
Heat transfer at a rate of 500 W through a wall with a thermal conductivity of...
Heat transfer at a rate of 500 W through a wall with a thermal conductivity of 1.7 W/mK. The wall is 4-m high, 3-m wide, and 50-cm thick. If the inner surface of the wall is at 20 degrees Celsius, determine the temperature at the midplane of the wall. a. 7.7 degrees Celsius b. 53.5 degrees Celsius c. 13.9 degrees Celsius d. 127 degrees Celsius
(25pts) Consider a 1.2-m-high and 2-m-wide glass window whose thickness is 6 mm and thermal conductivity is k 0.78 W/m °C. Determine the steady rate of heat transfer through this glass window and the temperature of its inner surface for a day during which the room is maintained at 24°C while the temperature of the outdoors is-5°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h 10 W/m2 °C and h...
Quiz #5 [20 Points] Chapter 3 Electric Analogy - Thermal Resistance Network Consider a 0.8-m high and 1.5-m-wide glass window with a pane thickness of 8-mm and a thermal conductivity of k = 0.78 W/m-°C. Determine the steady rate of heat transfer through the glass window and the temperature at the inner and the outer surfaces of the wall for a day during which the room is maintained at 20°C while the temperature of the outdoors is -10°C. Take the...
2.) A plane wall is made of brick with a thermal conductivity of 1.5 W/(m-K). The wall is 20 cm thick and has a surface area of 10 m2. One side of the wall is exposed to outside air blowing against the wall resulting in a heat transfer coefficient of 20 W/(m2-K). The other side is exposed to an air-conditioned room with a convective heat transfer coefficient of 5 W/(m2-K). a. What are the thermal resistances corresponding to conduction through...
Thermal Resistance Analysis: Consider a 1.2 m high and 1.4 m wide double-pane window consisting of two 4 mm thick layers ofglass (k-0.85 W m-K) separated by a 8-min stagnant air space. (k= 0.025 W m-K) Determine the steady rate of heat transfer through this double-pane window and the temperature of its inner and outer surfaces on a day when the inside room temperature is maintained at 20 °C and the outside ambient temperature is 32 °C. Assume the convection...
Consider a 1.2-m-high and 2-m-wide double-pane window consisting of two 3-mm-thick layers of glass (k = 0.78 W/m K) separated by a 12-mm-wide stagnant air space (k = 0.026 W/m K). Determine the steady rate of heat transfer through this double-pane window. R . and all the surface temperatures (inner and outer of each pane) within the circuit (which you will draw and correctly label) for a day during which the room is maintained at 24°C while the temperature of...
Water flows through a 0.5 mm thick tube ( thermal conductivity of 16 W/m..C) with a inner diameter of 1.5 cm at 70°C such that the convective heat transfer coefficient is 3500 W/m² . •C. Let us consider the outside of the tube is 20oC and it loses heat by free convection with ho=7.6W/m² • •C. a. Draw the schematic diagram of the process b. Find out which one is the controlling resistance c. Calculate the overall heat-transfer coefficient per...
QUESTION 7 Consider a (1.25, 1.0, 1.3, 0.90)-m-high and (2.0, 2.1, 2.2, 2.3)-m-wide double-pane window (see Figure below) consisting of two 3-mm-thick layers of glass (k = 0.79 W/m.°c) separated by a 12-mm-wide stagnant air space (k = 0.028 W/m-°C). The room is maintained at (20, 21, 22, 23, 24) °C while the temperature of the outdoors is (5, 6, 7, 8)°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1...
Considera (1.25, 1.0, 1.3, 0.90).m-high and (2.0, 2.1, 2.2, 2.3).m-wide double-pane window (see Figure below) consisting of two 3-mm-thick layers of glass (k = 0.79 W/m°c) separated by a 12-mm-wide stagnant air space (k -0.028 W/m.°c). The room is maintained at (20, 21, 22, 23, 24) ºc while the temperature of the outdoors is (5, 6, 7, 8)°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1 = 11 W/m2.0c and...
Most questions answered within 3 hours.
-
PLEASE USE PYTHON
training error should strictly decrease as the degree of the
hypothesis polynomials increases....
asked 1 minute ago -
Using the Table and data below, create a procedure that accepts
product ID as a parameter...
asked 3 minutes ago -
Suppose X follows an exponential distribution with mean 7.5.
Determine the conditional probability P(x > 2.5...
asked 26 minutes ago -
Young softball batters are often instructed to “choke-up on the
bat” by their coach. In terms...
asked 29 minutes ago -
Suppose that you are an official with Mexico's economic
development agency. Write a one-page memo detailing...
asked 1 hour ago -
If you were an international firm, why would you support the
concept of global free trade?...
asked 1 hour ago -
Cisco packet tracer
Q1) Do you get any changes of IP address when packet is
traversing...
asked 1 hour ago -
What is the pressure inside a 33.0 L container holding 106.4 kg
of argon gas at...
asked 2 hours ago -
Question no 2
A housekeeping support department budgets its costs at
SR 40,000 per month plus...
asked 2 hours ago -
A 1400Kg sports car accelerates from rest to 90km/h in 7.0s.
What is the average power...
asked 3 hours ago -
For the following reaction, 0.128 moles of
potassium hydrogen sulfateare mixed with
0.504 moles of potassium...
asked 6 hours ago -
1. What is the present value of $400, three years in the future
if the interest...
asked 7 hours ago