Homework Answers
Add Answer to:
2.) A plane wall is made of brick with a thermal conductivity of 1.5 W/(m-K). The...
A 0.1 m thick brick wall with thermal conductivity 0.66 Wm K-1 is exposed to cold wind on the out...
A 0.1 m thick brick wall with thermal conductivity 0.66 Wm K-1 is exposed to cold wind on the outside of a house, at 270 K with convective heat transfer coefficient of 22.43 Wm2K1. On the inside of the house is calm air at 295.8 K, with a natural convective heat transfer coefficient of 10.49 Calculate the rate of heat transfer per unit area, in Wm, giving your answer to 3 decimal places
A 0.1 m thick brick wall with...
Consider a 4 m high, 6 m wide and 0.17 m thick wall whose thermal conductivity is k = 0.8 W/m.oC....
Consider a 4 m high, 6 m wide and 0.17 m thick wall whose thermal conductivity is k = 0.8 W/m.oC. On a certain day, the temperatures of the inner and the outer medium close to the wall are measured to be 14oC and 6oC, respectively. Both inner and outer surfaces are subjected to convection heat transfer. Assume that the convection heat transfer coefficient is the same for the two surfaces h = 5 W/m2 ∙ °C. 1. Draw the...
[6] A 20-cm thick wall of a house made of brick (k = 0.72W/m. C) is...
[6] A 20-cm thick wall of a house made of brick (k = 0.72W/m. C) is subjected to inside air at 22.C with a convection heat-transfer coefficient of 15 W/m2. C. The inner surface temperature of the wall is 18 C and the outside air temperature is -1 °C. Determine the outer surface temperature of the wall and the heat-transfer coefficient at the outer surface.
A large wall made of 10-cm-thick solid brick (k = 0.8 W/m.K, p 2000 kg/m3, and p 800 J/kg.K) is o...
Heat transfer question.
A large wall made of 10-cm-thick solid brick (k = 0.8 W/m.K, p 2000 kg/m3, and p 800 J/kg.K) is originally at a uniform temperature of 30°C. The wall is adiabatic (well insulated) on one side as shown in the figure. The other surface is suddenly exposed to convection air flow at 10°C, resulting in a heat transfer coefficient h=40W/m2.K. Fluid (4.1) Determine the temperature of both surfaces Gr 0 and x 10 cm) after 5 hr...
A plane wall with thermal conductivity of k, is insulated on one side and is exposed...
A plane wall with thermal conductivity of k, is insulated on one side and is exposed to ambient air at To and convection coefficient of h, on the other side. A heat source in the 3) wall is generating a uniform heat rate per unit volume of For one-dimensional steady-state conduction in the wall, derive a proper differential equation for the temperature by either using the heat equations or doing the energy balance. Identify proper boundary conditions and find the...
Reviewer Score 3. A plane wall of thickness 0.12m and thermal conductivity 40W/m K having uniform volumetric ene...
Reviewer Score 3. A plane wall of thickness 0.12m and thermal conductivity 40W/m K having uniform volumetric energy generation of 0.4MW/m3 is insulated on one side, while the other side is exposed to a fluid at 52 C. The convection heat transfer coefficient between the wall and the fluid is 400W/m2-K. Determine the (20 scores) maximum temperature in the wall. 4. r,rod OA rotates with uniform o o. At the moment, AB- 6r Signatory Score leration of block B at...
2. A 6 in thick concrete wall, having thermal conductivity of 0.8Btu/h.ft.°F, is exposed to air...
2. A 6 in thick concrete wall, having thermal conductivity of 0.8Btu/h.ft.°F, is exposed to air at 70°F on one side and air at 20°F on the opposite side. The convective heat transfer coefficients are 2Btu/h.ft.F on the 70°F side and 10 Btu/h.ft'.°F on the 20°F side. Compute the following: 1. Total thermal resistance 2. Rate of heat transfer 3. The surface temperatures of the wall 4. Check the temp. of the wall is within the allowable limit of 50°F
Consider an ocean-facing room in a high-rise building (L/W of 1). The ocean-facing wall (with window) is...
Consider an ocean-facing room in a high-rise building (L/W of 1). The ocean-facing wall (with window) is 10m by 4 m, contains two windows (3m by 1m, each). Assume the room is located 30 m above the neutral pressure level and the inside air temperature is maintained at 24°C with RH of 50%. Outside air is of 35°C with RH of 60%. Assume the convective heat transfer coefficients on inner side and outer side of the wall and window are 0.5 and...
Heat is uniformly generated at the rate of 2x 10W/m* in a wall of thermal conductivity...
Heat is uniformly generated at the rate of 2x 10W/m* in a wall of thermal conductivity 25 W/m-K and thickness 60 mm. The wall is exposed to convection on both sides, with different heat transfer coefficients and temperatures as shown. There are straight rectangular fins on the right-hand side of the wall, with dimensions as shown (L =20 mm) and thermal conductivity of 250 W/m-K. What is the maximum temperature that will occur in the wall? L tt-2 mm k=25...
The wall of a furnace consists of two parts, a ceramic brick lining (k=1.1 W/m C,....
The wall of a furnace consists of two parts, a ceramic brick lining (k=1.1 W/m C,. l=20 mm) and an outer steel wall (k=50 W/ m C, l=10 mm). The inner heat transfer coefficient is 29 W/ m2 C and the outer heat transfer coefficient is 14 W/ m2 C. Taking the bulk temperature of the furnace to be 1000 C and the air temperature outside the furnace as 15 C calculate the temperature of the outer steel wall exposed...
A 0.1 m thick brick wall with thermal conductivity 0.66 Wm K-1 is exposed to cold wind on the outside of a house, at 270 K with convective heat transfer coefficient of 22.43 Wm2K1. On the inside of the house is calm air at 295.8 K, with a natural convective heat transfer coefficient of 10.49 Calculate the rate of heat transfer per unit area, in Wm, giving your answer to 3 decimal places
A 0.1 m thick brick wall with...
[6] A 20-cm thick wall of a house made of brick (k = 0.72W/m. C) is subjected to inside air at 22.C with a convection heat-transfer coefficient of 15 W/m2. C. The inner surface temperature of the wall is 18 C and the outside air temperature is -1 °C. Determine the outer surface temperature of the wall and the heat-transfer coefficient at the outer surface.
Heat transfer question.
A large wall made of 10-cm-thick solid brick (k = 0.8 W/m.K, p 2000 kg/m3, and p 800 J/kg.K) is originally at a uniform temperature of 30°C. The wall is adiabatic (well insulated) on one side as shown in the figure. The other surface is suddenly exposed to convection air flow at 10°C, resulting in a heat transfer coefficient h=40W/m2.K. Fluid (4.1) Determine the temperature of both surfaces Gr 0 and x 10 cm) after 5 hr...
A plane wall with thermal conductivity of k, is insulated on one side and is exposed to ambient air at To and convection coefficient of h, on the other side. A heat source in the 3) wall is generating a uniform heat rate per unit volume of For one-dimensional steady-state conduction in the wall, derive a proper differential equation for the temperature by either using the heat equations or doing the energy balance. Identify proper boundary conditions and find the...
Reviewer Score 3. A plane wall of thickness 0.12m and thermal conductivity 40W/m K having uniform volumetric energy generation of 0.4MW/m3 is insulated on one side, while the other side is exposed to a fluid at 52 C. The convection heat transfer coefficient between the wall and the fluid is 400W/m2-K. Determine the (20 scores) maximum temperature in the wall. 4. r,rod OA rotates with uniform o o. At the moment, AB- 6r Signatory Score leration of block B at...
2. A 6 in thick concrete wall, having thermal conductivity of 0.8Btu/h.ft.°F, is exposed to air at 70°F on one side and air at 20°F on the opposite side. The convective heat transfer coefficients are 2Btu/h.ft.F on the 70°F side and 10 Btu/h.ft'.°F on the 20°F side. Compute the following: 1. Total thermal resistance 2. Rate of heat transfer 3. The surface temperatures of the wall 4. Check the temp. of the wall is within the allowable limit of 50°F
Heat is uniformly generated at the rate of 2x 10W/m* in a wall of thermal conductivity 25 W/m-K and thickness 60 mm. The wall is exposed to convection on both sides, with different heat transfer coefficients and temperatures as shown. There are straight rectangular fins on the right-hand side of the wall, with dimensions as shown (L =20 mm) and thermal conductivity of 250 W/m-K. What is the maximum temperature that will occur in the wall? L tt-2 mm k=25...
Most questions answered within 3 hours.
-
While rotating the tires on your car you notice a rock [mass =
0.1 Kg] stuck...
asked 1 hour ago -
Using MARS simulator, write MIPS programs according to
the following scenarios: Receive a positive integer number...
asked 3 hours ago -
An object in front of a concave mirror has a real image that is
11.5 cm...
asked 3 hours ago -
Consider the reaction, C3 H8 + O2 --> CO2 + H2O. How many
moles of O2...
asked 5 hours ago -
You and your opponent both roll a fair die. If you both roll the
same number,...
asked 5 hours ago -
In a study of the accuracy of fast food drive-through orders,
Restaurant A had 257 accurate...
asked 5 hours ago -
Identify and describe in detail the four categories of
institutions that could be included in a...
asked 5 hours ago -
In python
class Customer:
def __init__(self, customer_id, last_name, first_name, phone_number, address):
self._customer_id = int(customer_id)
self._last_name =...
asked 6 hours ago -
What is an example of a limitation in implementing a new
ERP system and how it...
asked 5 hours ago -
In a section of 9.7cm of an artery with a radius of 2.6mm there
is a...
asked 6 hours ago -
the two carboxylic acid groups of aspartic acid have different
acidities with pKa values of 2.1...
asked 6 hours ago -
Would CuCO3 aqueous salt combined with calcium chloride
form a solid precipitate? If so, what would...
asked 6 hours ago