Instructions: Build the necessary control logic using ladder diagrams without the use of stages f...
Instructions: Build the necessary control logic using ladder diagrams without the use of stages for the following process. Nomenclature:LB Lightbulb and SW-Switch. turns ON LB1 when press SW1 (EXAMPLE) ХО SW1 YO LB1 OUT 2. LB1 is lit 5 times (10 seconds off between consecutive starts) when SW1 is pressed. It turns ON LB1 when pressing SW1 or SW2, But not both simultaneously. 3. It turns ON LB1 by 10 seconds when pressing SW2, as soon as LB1 turns OFF,...
Part IV: Ladder Diagram Build the necessary control logic using ladder diagrams with the use of STAGES for the following processes: (Including: Counter, timer) The machine shown below automatically drills the pieces that move in the "Conveyor". Once the X_5_button is pressed, the pieces begin to move until the X__2_ sensor is activated; this will stop the "Conveyor" and activate the vertical motor Y 10tat will perform the drilling. Each time a piece comes out of the process it will...