Instructions: Build the necessary control logic using ladder diagrams without the use of stages f...
Instructions: Build the necessary control logic using ladder diagrams without the use of stages for the following process. Nomenclature: LB - Lightbulb and SW Switch. 1. t turns ON LB1 when press SW1 (EXAMPLE) xo SW1 YO LB1 OUT 2. LB1 is lit for 10 seconds by pressing sW1 10 times 3. Pressing SW1 will turn ON LB1 for 10 seconds followed by LB2 for another 10 seconds, repeatedly until you press SW2. Pressing SW1 will turn ON LB1 which...
Part IV: Ladder Diagram Build the necessary control logic using ladder diagrams with the use of STAGES for the following processes: (Including: Counter, timer) The machine shown below automatically drills the pieces that move in the "Conveyor". Once the X_5_button is pressed, the pieces begin to move until the X__2_ sensor is activated; this will stop the "Conveyor" and activate the vertical motor Y 10tat will perform the drilling. Each time a piece comes out of the process it will...