1. (a) Briefly describe what is meant by the terms compaction and consolidation [5 marks] (b) In a standard B.S. compaction test, the following data was collected Moisture Content Bulk Density (Mg/m3...
1. In compaction tests, the following data were collected: Bulk density, p (Mg/m) 1.85 2.01 2.12 2.19 2.15 2.02 Water content, w (%) 11 14 17 19 a) Draw the graph of dry density against water content and draw the maximum dry density and the optimum moisture content. b) On the same axes, draw the 'zero air voids' line and 5 per cent air void line hence determine the air voids content at the maximum dry density. c) Under field...
(b) The results of a standard Proctor test are given in the Table Q1. The volume of the proctor mould used was 1000 cm? The specific gravity (G) of the soil is 2.65. (1) Plot the graph of dry density (kg/m?) against moisture content (%), the zero air void line (ZAV) and determine the maximum dry density and optimum moisture content. Table Q1: Standard Proctor test result Mass of wet soil in Moisture the mould (kg) content (%) 1.75 13...
standard Proctor compaction test conducted on a clay sample gave the following results Weight of wet soil in the mould (g) | 1765 1860 1924 1947 1928 1906 Moisture content (%) 13.1 14.9 16.8 18.9 21.1 23.2 If the volume of the sample mould is 944 cm3, Determine the maximum dry density and optimum moisture content of the clay Draw on the same graph 5% voids ratio line. Sketch the dry density-moisture content curve you expect from modified Proctor compaction...
write nicely thank you bruh this for sand (b) A soil sample from a proposed road construction in Segamat, Johor was sent to a Geotechnical Laboratory UTHM, for a compaction test. The results of compaction test obtained using modified Proctor compaction test is shown in Figure Q4 (b). 3 hi HELP ME! Predict the maximum dry density (Pmax), optimum moisture content (OMC), the dry density at 95% compaction and the range of moisture content at 95% compaction on dry...
Question 1 (20 points) A standard Proctor test was performed on a soil which has a Gs = 2.70. The moisture content and total density results are shown in the table below. Moisture Content 16% Wet unit weight (KN/m3) 19.1 18% 20.3 20% 20.7 22% 20.0 24% 18.2 a. Calculate the dry unit weight for each sample and type your answers in the first 5 answer boxes below (3 sigs, in KN/m3). b. Calculate the dry unit weight at zero...