Homework Answers
Feel free to discuss your
doubts in the comment section below if any.
Please like my work.
Feel free to discuss your
doubts in the comment section below if any.
Please like my work.
Add Answer to:
(b) The results of a standard Proctor test are given in the Table Q1. The volume...
standard Proctor compaction test conducted on a clay sample gave the following results Weight of wet soil in the mould...
standard Proctor compaction test conducted on a clay sample gave the following results Weight of wet soil in the mould (g) | 1765 1860 1924 1947 1928 1906 Moisture content (%) 13.1 14.9 16.8 18.9 21.1 23.2 If the volume of the sample mould is 944 cm3, Determine the maximum dry density and optimum moisture content of the clay Draw on the same graph 5% voids ratio line. Sketch the dry density-moisture content curve you expect from modified Proctor compaction...
Problem 1 (3 points) The results of a standard Proctor test are given in the following...
Problem 1 (3 points) The results of a standard Proctor test are given in the following table. Moisture Mass of moist soil in the mold (R) Trial no. 1668 1723 1800 1850 1873 8.9 12 1868 a. Determine the maximum dry unit weight of compaction and the opti- mum moisture content. Given: Mold volume = 943.3 cm'. b. Determine the void ratio and the degree of saturation at the optimum moisture content. Given: G, = 2.73 Problem 2 (4 points)...
The following results were obtained from standard Proctor compaction tests. Test ID Mass of moist soil...
The following results were obtained from standard Proctor compaction tests. Test ID Mass of moist soil (kg) 1 1.633 Standard Proctor Test 2 . 1.841 1.907 1.822 1.756 Moisture Content Test 14 14 Mass of tin empty (g) Mass of tin + wet sample (g) Mass of tin + dry sample (g) 98 62 878280 (a) Calculate moisture content (w) and dry unit weight (ya) for standard Proctor compaction tests. Plot moisture content (w) vs. dry unit weight (yd). Given:...
A field unit weight determination test for the soil described in Problem 6.6 yielded the following...
A field unit weight
determination test for the soil described in Problem 6.6 yielded
the following data: moisture content=10.5% and moist density=1705
kg/m3. Determine the relative compaction.
6.6: The results of a standard Proctor test are given in the following table. Determine the maximum dry density (kg/m²) of compaction and the optimum moisture content. Volume of Proctor mold (cm) Moisture Content (%) Moist unit weight (kg/m3) Dry unit weight 943.3 943.3 943.3 943.3 943.3 943.3 943.3 943.3 Mass of Wet...
A series of Proctor compaction tests were performed on fill material used for a roadway application. The results are shown in the Table below.
A series of Proctor compaction tests were performed on fill material used for a roadway application. The results are shown in the Table below.Data Point No.12345Mass of compacted soil + mould (kg)3.7623.9214.0344.0914.04Moisture content, w (%)4.57.510.112.916.4 The mass of the compaction mould was 2.031 kg. The mould volume was 1×10–3 m3.(a) Compute dry unit weight gd for each data point. (b) Draw the Proctor compaction curve of the soil, and determine the maximum dry unit weight gd max and optimum moisture content...
write nicely thank you bruh this for sand (b) A soil sample from a proposed...
write nicely thank you bruh
this for sand
(b) A soil sample from a proposed road construction in Segamat, Johor was sent to a Geotechnical Laboratory UTHM, for a compaction test. The results of compaction test obtained using modified Proctor compaction test is shown in Figure Q4 (b). 3 hi HELP ME! Predict the maximum dry density (Pmax), optimum moisture content (OMC), the dry density at 95% compaction and the range of moisture content at 95% compaction on dry...
The results of a standard Proctor test (ASTM performed in a standard mold with V-1/30 ft...
The results of a standard Proctor test (ASTM performed in a standard mold with V-1/30 ft are given below Weight of wet soil Water content in the mold (Ibs 3.26 4.15 4.67 4.02 3.63 8.4 10.2 12.3 14.6 16.8 a) Plot the data on a plot of dry unit weight versus water content and determine the maximum dry unit weight and the optimum water content. As the geotechnical engineering consultant involved in the project, based on the results obtained in...
Soil Mechanics Problem 2 (26 points) Results from a standard Proctor compaction test yield an Optimum...
Soil Mechanics
Problem 2 (26 points) Results from a standard Proctor compaction test yield an Optimum Moisture Content (OMC) of 12% and a maximum dry unit weight of 18.1 kN/m. Given this information, address the following questions. a) The soil was used to construct an embankment on a construction site. A sand cone test indicated that a layer of the compacted fill had a total unit weight of 19.8 kN/m3 and a moisture content of 11%. Specifications call for the...
3. Modified Proctor compaction test results for a soil at a construction site indicated that the...
3. Modified Proctor compaction test results for a soil at a construction site indicated that the maximum dry density ya = 125 lb/ft at an optimum water content Wopt = 9.5%. Assuming specific gravity of the mineral solids G=2.65, calculate: (a) the void ratio at the maximum dry density (b) the degree of saturation Sat maximum dry density.
Q3. The data from a standard Proctor test are shown in the table belovw (a) Determine...
Q3. The data from a standard Proctor test are shown in the table belovw (a) Determine the maximum dry unit weight and the optimum water content. (b) Plot the zero air voids line. (c) Determine the degree of saturation at the maximum dry unit weight. Diameter of mould 101.4 mm Height of mould 116.7 mm Mass of mould 4196.50 grams Specific gravity, Gs 2.69 Unit weight determination Water content determination Mass of can and wet soil Mass of can and...
standard Proctor compaction test conducted on a clay sample gave the following results Weight of wet soil in the mould (g) | 1765 1860 1924 1947 1928 1906 Moisture content (%) 13.1 14.9 16.8 18.9 21.1 23.2 If the volume of the sample mould is 944 cm3, Determine the maximum dry density and optimum moisture content of the clay Draw on the same graph 5% voids ratio line. Sketch the dry density-moisture content curve you expect from modified Proctor compaction...
Problem 1 (3 points) The results of a standard Proctor test are given in the following table. Moisture Mass of moist soil in the mold (R) Trial no. 1668 1723 1800 1850 1873 8.9 12 1868 a. Determine the maximum dry unit weight of compaction and the opti- mum moisture content. Given: Mold volume = 943.3 cm'. b. Determine the void ratio and the degree of saturation at the optimum moisture content. Given: G, = 2.73 Problem 2 (4 points)...
The following results were obtained from standard Proctor compaction tests. Test ID Mass of moist soil (kg) 1 1.633 Standard Proctor Test 2 . 1.841 1.907 1.822 1.756 Moisture Content Test 14 14 Mass of tin empty (g) Mass of tin + wet sample (g) Mass of tin + dry sample (g) 98 62 878280 (a) Calculate moisture content (w) and dry unit weight (ya) for standard Proctor compaction tests. Plot moisture content (w) vs. dry unit weight (yd). Given:...
A field unit weight
determination test for the soil described in Problem 6.6 yielded
the following data: moisture content=10.5% and moist density=1705
kg/m3. Determine the relative compaction.
6.6: The results of a standard Proctor test are given in the following table. Determine the maximum dry density (kg/m²) of compaction and the optimum moisture content. Volume of Proctor mold (cm) Moisture Content (%) Moist unit weight (kg/m3) Dry unit weight 943.3 943.3 943.3 943.3 943.3 943.3 943.3 943.3 Mass of Wet...
write nicely thank you bruh
this for sand
(b) A soil sample from a proposed road construction in Segamat, Johor was sent to a Geotechnical Laboratory UTHM, for a compaction test. The results of compaction test obtained using modified Proctor compaction test is shown in Figure Q4 (b). 3 hi HELP ME! Predict the maximum dry density (Pmax), optimum moisture content (OMC), the dry density at 95% compaction and the range of moisture content at 95% compaction on dry...
The results of a standard Proctor test (ASTM performed in a standard mold with V-1/30 ft are given below Weight of wet soil Water content in the mold (Ibs 3.26 4.15 4.67 4.02 3.63 8.4 10.2 12.3 14.6 16.8 a) Plot the data on a plot of dry unit weight versus water content and determine the maximum dry unit weight and the optimum water content. As the geotechnical engineering consultant involved in the project, based on the results obtained in...
Soil Mechanics
Problem 2 (26 points) Results from a standard Proctor compaction test yield an Optimum Moisture Content (OMC) of 12% and a maximum dry unit weight of 18.1 kN/m. Given this information, address the following questions. a) The soil was used to construct an embankment on a construction site. A sand cone test indicated that a layer of the compacted fill had a total unit weight of 19.8 kN/m3 and a moisture content of 11%. Specifications call for the...
3. Modified Proctor compaction test results for a soil at a construction site indicated that the maximum dry density ya = 125 lb/ft at an optimum water content Wopt = 9.5%. Assuming specific gravity of the mineral solids G=2.65, calculate: (a) the void ratio at the maximum dry density (b) the degree of saturation Sat maximum dry density.
Q3. The data from a standard Proctor test are shown in the table belovw (a) Determine the maximum dry unit weight and the optimum water content. (b) Plot the zero air voids line. (c) Determine the degree of saturation at the maximum dry unit weight. Diameter of mould 101.4 mm Height of mould 116.7 mm Mass of mould 4196.50 grams Specific gravity, Gs 2.69 Unit weight determination Water content determination Mass of can and wet soil Mass of can and...
Most questions answered within 3 hours.
-
Suppose you are the money manager of a $4.74 million investment
fund. The fund consists of...
asked 3 minutes ago -
A condenser has 0.073 kg/s of propane entering at 18 bar and
70°C, and leaving as...
asked 1 minute ago -
What is a highly unreasonable omission or misrepresentation
involving an extreme departure from the standards of...
asked 26 minutes ago -
What are the three mechanisms that control hormone release and a
example of each.
asked 39 minutes ago -
What would happen to the price level and real GDP if new, large
reserves of petroleum...
asked 41 minutes ago -
2. According to economists, people pollute because
a. They have low self esteem
b. They are...
asked 35 minutes ago -
For this project you will be writing up a simple Clock program
to keep track of...
asked 42 minutes ago -
The December 31, 2018, adjusted trial balance for Fightin' Blue
Hens Corporation is presented below.
...
asked 46 minutes ago -
E21-11 (L02) (Amortization Schedule and Journal Entries for
Lessee) Laura Leasing Company signs an agreement on...
asked 1 hour ago -
Joe Mataya’s company provides after-sales support for all the
photo-copiers and high-load printers on our campus....
asked 1 hour ago -
In a statistics class there are 12 students. Five of the
students are seniors and the...
asked 1 hour ago -
can someone please explain for me in any easy way what does
Dipole mean ?
asked 1 hour ago