Homework Answers
Add Answer to:
Problem 7 Three three-phase wye-connected loads are in parallel across a three-phase supply. The first load draws a cur...
1, Two balanced three-phase loads are in parallel. Load 1 draws 10 kW at 0.8 PF...
1, Two balanced three-phase loads are in parallel. Load 1 draws 10 kW at 0.8 PF lagging Load 2 draws 20 kVA at 0.6 PF leading a. b. The loads are supplied by a balanced three-phase 480 Vu source. (a) Draw the power triangle for the combined load. (b) Determine PF of the combined load. (c) Determine the magnitude of the line current from the source. (d) Y-connected inductors are now installed in parallel with the combined load. What value...
The following three-phase, balanced loads are connected across a three-phase, Y-connected 60 Hz source with a...
The following three-phase, balanced loads are connected across a three-phase, Y-connected 60 Hz source with a line-to-line voltage of 480 V. The loads are described below: • Load 1: ∆-connected, total three-phase apparent power is 30 kVA at 0.95 power factor lagging. • Load 2: ∆-connected, total three-phase active power is 20 kW at 0.7 power factor lagging. • Load 3: Y-connected, phase current is 30 A, and power factor is 0.9 pf leading. (a) Calculate the total complex power...
10. Two loads connected in parallel draw a total of 2.4 kW at 0.8 pflagging from...
10. Two loads connected in parallel draw a total of 2.4 kW at 0.8 pflagging from a 120-V rms, 60- Hz line. One load absorbs 1.5 kW at a 0.707 pf lagging. Determine: (a) the pf of the second load, INV 11. Calculate the line currents for the system shown in figure. Calculate also the total power and reactive power consumed by the load. w 12. For the balanced three-phase circuit in Fig.. Calculate the line currents, the phase voltage...
Please show detailed steps. Thanks Problem # 1: Three Phase Power [35 points] A three-phase substation...
Please show detailed steps. Thanks
Problem # 1: Three Phase Power [35 points] A three-phase substation bus supplies three wye-connected three phase loads that are connected in parallel through a three-phase feeder with an impedance of 0.3 30 per phase Load 1 draws 75kVA at 0.866 lagging power factor, load 2 draws 45 kW at 0.70 leading power factor and load 3 draws 20 kVAR at 0.85 lagging power factor. The line-line voltage at the load is 460V Take the...
9. A three phase balanced Y connected source is supplying three, three phase loads that are...
9. A three phase balanced Y connected source is supplying three, three phase loads that are connected in parallel. First load is a y connected and has an impedance of 30+j40 ohms. The second load is absorbing a total of 150kVA at 0.5 power factor lagging. The third load is absorbing 150kVA at 0.5 power factor leading. The line to line source rms voltage is 2500V. i Find the load current in each load i) Find the total real and...
3. (40 points) Three-phase loads are connected in parallel across a 24 KV (line-line three-phase power...
3. (40 points) Three-phase loads are connected in parallel across a 24 KV (line-line three-phase power supply. Load 1: 120 KVA at 0.8 power factor leading; Load 2: 180 KW at 0.6 power factor lagging, Load 3: 40 KW at unity power factor Find the total complex power of three loads; (ii) Draw the power triangle of the combined load (ii) Find the overall power factor (iv) Find the line current (magnitude only) in the power supply line.
Section 2: Three phase circuit Three phase wye connected generator supplies two parallel loads through a...
Section 2: Three phase circuit Three phase wye connected generator supplies two parallel loads through a feeder. Load 1 Is an unbalanced wye connected load and load 2 is a balanced delta connected load. System data: Generator: Sg = 600 MVA; vg-11-25KV; Xg = 11896; Feeder: Z (0.08+j0.62) Ω/mile, length-8 miles Load 1: VII = 24KV, Pa =75MW Pb 75MW Pc=75MW pf_a=0.8 pf b 0.84 pf_c=0.78 Load 2: VIl-24KV; P total-225MW, pf 0.8; (all the power factor is supposed to...
508 CHAPTER 11 . POLYPHASE CIRCUITS 11.40 In a balanced three-phase system, the source has an...
508 CHAPTER 11 . POLYPHASE CIRCUITS 11.40 In a balanced three-phase system, the source has an aboc phase-sequence and is connected in delta. There are two rallel wye-connected loads. The phase impedance of load i and load 2 is 4 The line impedance connecting the source to the loads is 0.3 + j0.2 2. If the curre IAN! = 10/20-Arms, find the delta currents in the source 4 Ω and 10 +/4 Ω, respectively. nt in the a phase of...
2. Two balanced three-phase loads are connected in parallel. One load with per phase impedance 21...
2. Two balanced three-phase loads are connected in parallel. One load with per phase impedance 21 ?, is connected in delta, and the other load has per phase impedance 15 2 and is connected in wye. Ignore the line impedance. If the line voltage is a 208230° Vrms, determine (a) the phase voltage for phase-a, ) the line current Ia*, (c) the phase currents in the delta load (d) the complex power of the load and the power factor.
A three-phase load of 15 kVA with a PF of 0.8 lagging is connected in parallel...
A three-phase load of 15 kVA with a PF of 0.8 lagging is connected in parallel with a three-phase load of 36 kW at 0.6 PF leading. The line-line voltage is 2000V. a) Find the total complex power and power factor. Is it inductive or capacitive? b) How much kVAR is needed to make the PF unity? c) What is the magnitude of the current going into the total load?
1, Two balanced three-phase loads are in parallel. Load 1 draws 10 kW at 0.8 PF lagging Load 2 draws 20 kVA at 0.6 PF leading a. b. The loads are supplied by a balanced three-phase 480 Vu source. (a) Draw the power triangle for the combined load. (b) Determine PF of the combined load. (c) Determine the magnitude of the line current from the source. (d) Y-connected inductors are now installed in parallel with the combined load. What value...
10. Two loads connected in parallel draw a total of 2.4 kW at 0.8 pflagging from a 120-V rms, 60- Hz line. One load absorbs 1.5 kW at a 0.707 pf lagging. Determine: (a) the pf of the second load, INV 11. Calculate the line currents for the system shown in figure. Calculate also the total power and reactive power consumed by the load. w 12. For the balanced three-phase circuit in Fig.. Calculate the line currents, the phase voltage...
Please show detailed steps. Thanks
Problem # 1: Three Phase Power [35 points] A three-phase substation bus supplies three wye-connected three phase loads that are connected in parallel through a three-phase feeder with an impedance of 0.3 30 per phase Load 1 draws 75kVA at 0.866 lagging power factor, load 2 draws 45 kW at 0.70 leading power factor and load 3 draws 20 kVAR at 0.85 lagging power factor. The line-line voltage at the load is 460V Take the...
9. A three phase balanced Y connected source is supplying three, three phase loads that are connected in parallel. First load is a y connected and has an impedance of 30+j40 ohms. The second load is absorbing a total of 150kVA at 0.5 power factor lagging. The third load is absorbing 150kVA at 0.5 power factor leading. The line to line source rms voltage is 2500V. i Find the load current in each load i) Find the total real and...
3. (40 points) Three-phase loads are connected in parallel across a 24 KV (line-line three-phase power supply. Load 1: 120 KVA at 0.8 power factor leading; Load 2: 180 KW at 0.6 power factor lagging, Load 3: 40 KW at unity power factor Find the total complex power of three loads; (ii) Draw the power triangle of the combined load (ii) Find the overall power factor (iv) Find the line current (magnitude only) in the power supply line.
Section 2: Three phase circuit Three phase wye connected generator supplies two parallel loads through a feeder. Load 1 Is an unbalanced wye connected load and load 2 is a balanced delta connected load. System data: Generator: Sg = 600 MVA; vg-11-25KV; Xg = 11896; Feeder: Z (0.08+j0.62) Ω/mile, length-8 miles Load 1: VII = 24KV, Pa =75MW Pb 75MW Pc=75MW pf_a=0.8 pf b 0.84 pf_c=0.78 Load 2: VIl-24KV; P total-225MW, pf 0.8; (all the power factor is supposed to...
508 CHAPTER 11 . POLYPHASE CIRCUITS 11.40 In a balanced three-phase system, the source has an aboc phase-sequence and is connected in delta. There are two rallel wye-connected loads. The phase impedance of load i and load 2 is 4 The line impedance connecting the source to the loads is 0.3 + j0.2 2. If the curre IAN! = 10/20-Arms, find the delta currents in the source 4 Ω and 10 +/4 Ω, respectively. nt in the a phase of...
2. Two balanced three-phase loads are connected in parallel. One load with per phase impedance 21 ?, is connected in delta, and the other load has per phase impedance 15 2 and is connected in wye. Ignore the line impedance. If the line voltage is a 208230° Vrms, determine (a) the phase voltage for phase-a, ) the line current Ia*, (c) the phase currents in the delta load (d) the complex power of the load and the power factor.
Most questions answered within 3 hours.
-
Please explain all the options in brief.
In a forest fire, many oak trees were destroyed....
asked 33 seconds ago -
Queuing Theory Problem:
Traffic to a message switching system , arrives in a random
pattern at...
asked 7 minutes ago -
During the past six months, 73.2 percent of US households
purchased sugar. Assume that these expenditures...
asked 18 minutes ago -
Which is a possible value for the principal quantum number
n?
7, 3.14 , 2.5, None...
asked 22 minutes ago -
Everyone loves a helium filled balloon for a party. Do some
basic Internet research and answer...
asked 21 minutes ago -
Here is a pair of aromatic compounds that each have a complicated
set of aromatic peaks....
asked 40 minutes ago -
As with many public goods, determining the appropriate level of
government support for the production of...
asked 43 minutes ago -
Write a balanced chemical equation for the oxidation reaction
between Caro’s acid (H2SO5) and CN– ion...
asked 46 minutes ago -
Calculate the number of valence electrons for
[Mo(C6H6)(CO)3]
asked 57 minutes ago -
Which of the following are true about the strength of the
association between two variables?
1-...
asked 53 minutes ago -
You are a monopolist and know that your consumers have a linear
demand curve. At what...
asked 52 minutes ago -
Raising a heavy load requires work. Raising it in half the time
requires:
asked 59 minutes ago