Homework Answers
Add Answer to:
(b) The brick wall of a building has dimensions of 4 m by 10 m, and it is 15 cm thick with a coefficient of thermal con...
012 10.0 points The brick wall (of thermal conductivity 0.62 W/m.° C) of a building has...
012 10.0 points The brick wall (of thermal conductivity 0.62 W/m.° C) of a building has dimensions of 2.7 m by 15 m and is 9 cm thick. How much heat flows through the wall in a 10.9 h period when the average inside and outside temperatures are, respectively, 29°C and 5°C? Answer in units of MJ.
A. Suppose a brick wall of a house is 4.00 inches thick and that the thermal...
A. Suppose a brick wall of a house is 4.00 inches thick and that the thermal conductivity of the brick is about 0.84 J/smK . The area is 240 ft2 and there is a 12F° difference between the inside and outside. Assume a heater pumps the same amount of energy lost via conduction in the opposite direction that the energy is being transferred via conduction, i.e. the heater pumps energy from the cold side to the hot side of the...
A 0.1 m thick brick wall with thermal conductivity 0.66 Wm K-1 is exposed to cold wind on the out...
A 0.1 m thick brick wall with thermal conductivity 0.66 Wm K-1 is exposed to cold wind on the outside of a house, at 270 K with convective heat transfer coefficient of 22.43 Wm2K1. On the inside of the house is calm air at 295.8 K, with a natural convective heat transfer coefficient of 10.49 Calculate the rate of heat transfer per unit area, in Wm, giving your answer to 3 decimal places
A 0.1 m thick brick wall with...
1. one wall is formed by two materials, the first one is 15cm thick and has...
1. one wall is formed by two materials, the first one is 15cm thick and has a thermal conductivity of 1W/mk and the second one is cork with an unknown thick. If the temperature of the inner wall is 22°C and the temperature of the outer surface is -10°C find: a) the necessary thick of the cork to maintain a heat loss of 8W. Consider an area of 1m2! b) the interface temperature. Note: use a scheme that represents the...
2.) A plane wall is made of brick with a thermal conductivity of 1.5 W/(m-K). The...
2.) A plane wall is made of brick with a thermal conductivity of 1.5 W/(m-K). The wall is 20 cm thick and has a surface area of 10 m2. One side of the wall is exposed to outside air blowing against the wall resulting in a heat transfer coefficient of 20 W/(m2-K). The other side is exposed to an air-conditioned room with a convective heat transfer coefficient of 5 W/(m2-K). a. What are the thermal resistances corresponding to conduction through...
A wall in a building has a width of 15 m and a height of 3...
A wall in a building has a width of 15 m and a height of 3 m. It is made of several layers — a layer of motionless air with an R value of 0.12 K m2/ W, a 12.4 mm thick layer of gypsum board with a thermal conductivity of 0.17 W/m K, a layer of brick with an R value of 1.7 K m2/ W, and another layer of motionless air with an R value of 0.12 K...
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conduc...
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside- surface temperature is 32 °C and the inside-surface temperature is 24°c. Calculate the rate of heat transfer, in watts, through a plane of window glass, giving your answer to 3 decimal places.
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside-...
The surface of a furnace wall is at a temperature of 1350oC. The outside wall temperature...
The surface of a furnace wall is at a temperature of 1350oC. The outside wall temperature is 42oC. The furnace wall is made of 25 cm of refractory material having a thermal conductivity of 1.4 W/moK. The outside wall is steel, 1 cm thick with thermal conductivity of 47 W/moK. Calculate the thickness in meters of brick to be installed in between the refractory material and steel if its thermal conductivity is 0.28 W/moK and the heat loss is not...
Heat Transfer -A wall 20 cm thick is to be constructed from material that has an...
Heat Transfer
-A wall 20 cm thick is to be constructed from material that has an average thermal conductivity of 2 W/m C. The wall is to be insulated with 5cm material having an average thermal conductivity of 0.5W/m C. Assuming that the inner and outer surface temperatures of the insulated wall are 200 and 20°C, calculate the heat transfer per unit area and the intermediate Temperature between the insulation and the wall.
[6] A 20-cm thick wall of a house made of brick (k = 0.72W/m. C) is...
[6] A 20-cm thick wall of a house made of brick (k = 0.72W/m. C) is subjected to inside air at 22.C with a convection heat-transfer coefficient of 15 W/m2. C. The inner surface temperature of the wall is 18 C and the outside air temperature is -1 °C. Determine the outer surface temperature of the wall and the heat-transfer coefficient at the outer surface.
012 10.0 points The brick wall (of thermal conductivity 0.62 W/m.° C) of a building has dimensions of 2.7 m by 15 m and is 9 cm thick. How much heat flows through the wall in a 10.9 h period when the average inside and outside temperatures are, respectively, 29°C and 5°C? Answer in units of MJ.
A 0.1 m thick brick wall with thermal conductivity 0.66 Wm K-1 is exposed to cold wind on the outside of a house, at 270 K with convective heat transfer coefficient of 22.43 Wm2K1. On the inside of the house is calm air at 295.8 K, with a natural convective heat transfer coefficient of 10.49 Calculate the rate of heat transfer per unit area, in Wm, giving your answer to 3 decimal places
A 0.1 m thick brick wall with...
1. one wall is formed by two materials, the first one is 15cm thick and has a thermal conductivity of 1W/mk and the second one is cork with an unknown thick. If the temperature of the inner wall is 22°C and the temperature of the outer surface is -10°C find: a) the necessary thick of the cork to maintain a heat loss of 8W. Consider an area of 1m2! b) the interface temperature. Note: use a scheme that represents the...
2.) A plane wall is made of brick with a thermal conductivity of 1.5 W/(m-K). The wall is 20 cm thick and has a surface area of 10 m2. One side of the wall is exposed to outside air blowing against the wall resulting in a heat transfer coefficient of 20 W/(m2-K). The other side is exposed to an air-conditioned room with a convective heat transfer coefficient of 5 W/(m2-K). a. What are the thermal resistances corresponding to conduction through...
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside- surface temperature is 32 °C and the inside-surface temperature is 24°c. Calculate the rate of heat transfer, in watts, through a plane of window glass, giving your answer to 3 decimal places.
A window glass has dimensions, 1.04 m high, 2.34 m wide and 1.341 cm thick, with a thermal conductivity of 0.81 Wm10c-1. The outside-...
Heat Transfer
-A wall 20 cm thick is to be constructed from material that has an average thermal conductivity of 2 W/m C. The wall is to be insulated with 5cm material having an average thermal conductivity of 0.5W/m C. Assuming that the inner and outer surface temperatures of the insulated wall are 200 and 20°C, calculate the heat transfer per unit area and the intermediate Temperature between the insulation and the wall.
[6] A 20-cm thick wall of a house made of brick (k = 0.72W/m. C) is subjected to inside air at 22.C with a convection heat-transfer coefficient of 15 W/m2. C. The inner surface temperature of the wall is 18 C and the outside air temperature is -1 °C. Determine the outer surface temperature of the wall and the heat-transfer coefficient at the outer surface.
Most questions answered within 3 hours.
-
(63
#14)
which of the following statments best describes how chamging
the concentration of the substances...
asked 1 hour ago -
In the following reaction, which element is undergoing
oxidation: Na2SO3 + N2O --> N2 + Na2SO4...
asked 2 hours ago -
Which of the following pairs of ions have the same electron
configuration?
I: Br− and Se2−...
asked 5 hours ago -
The Foremost Composite Materials Company is planning a two-day
sales conference for October 19-20. The conference...
asked 5 hours ago -
3) Illustrate the observed pattern of relatedness of organisms
versus adaptations to specific conditions. This means...
asked 5 hours ago -
In winter a lake has a 0.35 m thick ice layer over 1.10 m of
water....
asked 6 hours ago -
Assuming the following has been encrypted with a Vigenere cipher
below, use the method(s) and assumptions...
asked 7 hours ago -
How would I use switch statements to write a program that will
take an input of...
asked 6 hours ago -
Imagine a reaction in which methane gas combusts at a constant
pressure of 1 atm and...
asked 7 hours ago -
Two parallel wires (each 12 m in length) are separated by a
distance of 0.065 m...
asked 7 hours ago -
Suppose there were three masses at the corner of uniform
equilateral triangle. The masses are m1...
asked 7 hours ago -
Situation: A building that is 618 m above the ground floor. How
many times would a...
asked 7 hours ago