ROUTING COMMANDS
AT ROUTER:1
Router> enable
Router# configure terminal
Router(config)#interface Fa0/0
Router(config-if)# ip address 192.168.1.1 255.255.255.128
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface Serial2/0
Router(config-if)#clock rate 64000
Router(config-if)# ip address 192.168.2.1 255.255.255.252
Router(config-if)#no shutdown
AT ROUTER : 2
Router> enable
Router# configure terminal
Router(config)#interface Fa0/0
Router(config-if)# ip address 192.168.1.129 255.255.255.128
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface Serial2/0
Router(config-if)#clock rate 64000
Router(config-if)# ip address 192.168.2.2 255.255.255.252
Router(config-if)#no shutdown
Router(config-if)#exit
RIP V2 COMMANDS
AT ROUTER : 1
Router#
Router#conf t
Router(config)#no router rip
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 192.168.1.1
Router(config-router)#no auto-summary
Router(config-router)#network 192.168.2.0
Router(config-router)#no auto-summary
AT ROUTER : 2
Router#
Router#conf t
Router(config)#no router rip
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 192.168.1.128
Router(config-router)#no auto-summary
Router(config-router)#network 192.168.2.0
Router(config-router)#no auto-summary
IP'S FOR PC'S
PC1
IP ADDRESS: 192.168.1.2
SUBNETMASK : 255.255.255.128
PC2
IP ADDRESS: 192.168.1.130
SUBNETMASK : 255.255.255.128
NETWORK:
OUTPUT OF PING:
FROM PC1 TO PC2
Configure RIPv2 1. Create the following network topology on Packet Tracer 192.168.2.0/30 192.168.2.2 /30 192.168.2.1/30...
PLEASE ATTACH A SCREENSHOT OF YOUR SUCCESSFUL PING IN PACKET TRACER FOR THE END!!!!!!!!!!! THANK YOU! Objectives Part A: Configure a simple static routing . Part B: Configure a simple RIP routing Part A: Configure a simple static routing 1. Create the following network topology on Packet Tracer Router-PT Router-PT Addressing Table Device Interface IP Address Subnet Mask Default Gatewa 10.0.0.1 20.0.0.1 30.0.0.1 20.0.0.2 0.0.0.10 30.0.0.10 N/A 255.0.0.0 255.0.0.0 255.0.0.0 255.0.0.0 255.0.0.0 255.0.0.0 Routero 2/0 NIA NIA NIA 10.0.0.1 30.0.0.1...
TELE33324 - Assignment 3 (10%) - Individual Assignment Packet Tracer Assignment 3 - VLSM - 10 MARKS (worth 10%) Objective: To familiarize yourself with subnetting using VLSM, static routing, EIGRP, and OSPF • Please submit hard copy. Refer to SLATE calendar for due date. Name: 158.20.96.0 255.255.224.0 Fa0/1 Fai/1 Fa0/0 Switch2 FaD Fa1/1 tu. Fa0/1 Fa0/0 Se2/0 10.8.0.0 255.248.0.0 R2 Fall 10.16.0.0 255.248.0.0 Se2/0 158.20.32.0 255.255.224.0 PC2 PCO Se2/0 Se3/0 R1 Fai/0 Fa0/0 10.24.0.0 255.248.0.0 Fa0/0 10.32.0.0 255.248.0.0 Fa0/1 Fa0/0...
Please use Cisco Packet Tracer to do the following assignment. ut S3M Dmya Bhaskar fotor Assignment 2: Static Routing & Default routing For the network shown below, assign an appropriate IP address for each host and router interface. Then configure all routers and implement all necessary static/default routes. Try to review routing tables on all routers and test the connectivity of your network using "ping" command before upload pkt file to blackboard. 2950-24 witch メ50t4 Switch 192.163 1.132/30 65 133...
Hi please help me solve this! Been stuck on this for a long time. I don;t know how to upload the file but packet tracer is required. Please help!! I don;t know how to begin or finish this! Regards 200.1.1.2 /24 200.1.1.1/24 Subnet 4 1941 PC-PT PCO 1941 Router0 Router1 Network Address 192.168.21.0/24 5 subnets required Serial link 4 VLANS required VLAN 20 (Staf) (Subnet 0) VLAN 30 (Student) (Subnet 1) VLAN 40 (Server) (Subnet 2) VLAN 100 (Management)(Subnet 3)...