4. A Diff. Pressure flow meter is calibrated to measure the flow of gas within 10...
4. A Diff. Pressure flow meter is calibrated to
measure the flow of gas within 10 – 40 kg/min. the flow meter is
designed to give 5 – 15 KPa differential pressure. And the meter
4-20 mA signal is designed to be linear with flow. (6)
a. Find the pressure difference and the current at 20kg/min
flow?
b. Find the flow at 7 KPa pressure difference?
Homework Answers
![d= /3x7] - 2 ylmin dm A Ka presure difference the Blow is wain.](http://img.homeworklib.com/images/b21d96f5-390a-4971-b0ec-f1c3af84bff4.png?x-oss-process=image/resize,w_560)
Add Answer to:
4. A Diff. Pressure flow meter is calibrated to measure the flow of gas within 10...
A Venturi meter equipped with a differential pressure gage is used to measure the flow rate...
A Venturi meter equipped with a differential pressure gage is used to measure the flow rate of water at 15°C (p = 999.1 kg/m”) through a 5-cm- diameter horizontal pipe. The diameter of the Venturi neck is 3 cm, and the measured pressure drop is 5.1 kPa. Taking the discharge coefficient to be 0.98, determine the volume flow rate of water and the average velocity through the pipe. 5 cm 3 cm Differential pressure gage Is The volume flow rate...
9. (10 points) An orifice meter with a 1.5 inch diameter opening is used to measure...
9. (10 points) An orifice meter with a 1.5 inch diameter opening is used to measure the flow rate of water through a horizontal 3 inch diameter pipe. A mercury manometer is used to measure the pressure difference across the orifice. If the differential height of the manometer is 15 inches, determine the volumetric flowrate (gal/min) of water through the pipe. You may assume the discharge coefficient is 0.6.
An orifice meter with a 2 inch diameter opening is used to measure the flow rate...
An orifice meter with a 2 inch diameter opening is used to measure the flow rate of water through a horizontal 3 inch diameter pipe. A mercury manometer is used to measure the pressure difference across the orifice. If the differential height of the manometer is 7 inches, determine the volumetric flowrate (gal/min) of water through the pipe. You may assume the discharge coefficient is 0.6.
9. (10 points) An orifice meter with a 1.0 inch diameter opening is used to measure...
9. (10 points) An orifice meter with a 1.0 inch diameter opening is used to measure the flow rate of water through a horizontal 3 inch diameter pipe. A mercury manometer is used to measure the pressure difference across the orifice. If the differential height of the manometer is 30 inches, determine the volumetric flowrate (gal/min) of water through the pipe. You may assume the discharge coefficient is 0.6.
A Venturi meter is a device for measuring the speed of a fluid within a pipe....
A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at speed v2 through a horizontal section of pipe whose cross-sectional area is A2-0.0589 m2 The gas has a density of ρ-1.30 kg m3 The Venturi meter has a cross sectiona area of .ם 33m and has been substituted for a section of the larger pipe. The pressure difference between the two sections is P2 P1 154 Pa....
thermaldynamics and fluid mechanics Question 4 An orifice plate flow meter, as shown in figure Q4,...
thermaldynamics and fluid mechanics
Question 4 An orifice plate flow meter, as shown in figure Q4, is situated in a horizontal pipe of 95 cm diameter (d) in which water flows. The pressure difference between the vena contracta and flow upstream at point 1 is measured using a differential manometer. The diameter of the sharp-edged orifice (d.) is 35 cm. The coefficient of discharge for the flow meter is 0.7, and the coefficient of contraction is 0.62. Assume the density...
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle...
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle exit diameter is 1.5 cm, and the measured pressure drop is 3.3 kPa. Determine the volume flow rate of water, the average velocity through the pipe, and the head loss 1.5 cm Differential pressure gage -3 m3(s m/s The volume flow rate of...
Problem 4 (25 points) A 40 degree inclined water manometer is to measure a gauge pressure...
Problem 4 (25 points) A 40 degree inclined water manometer is to measure a gauge pressure of 5000 Pa in a system involving air. The differential length on the manometer is measured with accuracy of 0.5 mm and resolution of 1 mm. Density of air compared to density of water is negligible. Specific weight of water is 9980 +/- 1% N/meter cube. The inclination angle is set to within 0.5 degrees. Calculate the design stage uncertainty in the measurement of...
fluid Q1: A venture meter is fitted in a pipe of 30 cm diameter inclined at...
fluid
Q1: A venture meter is fitted in a pipe of 30 cm diameter inclined at 40° to the horizontal to measure the flow rate of petrol having a specific gravity of 0.8. The ratio of areas of main pipe and throat is 5 and the throat is at 1 m from the inlet along its length. The difference in manometer head is 40 mm of mercury. Assuming the coefficient of discharge as 0.96. Calculate the discharge through the venture...
..Liquid water at 20°C flows through an inclined Venturi meter at a flow rate of 0,12...
..Liquid water at 20°C flows through an inclined Venturi meter at a flow rate of 0,12 m²/s. The inside Assume no head loss from point 1 to point 2. A mercury manometer is used to measure the pressure ipe diameter is reduced from 32 cm at point I to 16 cm at point 2. Point 1 is 28 cm lower than point 2. difference, as shown in the sketch. (a) Calculate the Reynolds number of the flow in the pipe...
A Venturi meter equipped with a differential pressure gage is used to measure the flow rate of water at 15°C (p = 999.1 kg/m”) through a 5-cm- diameter horizontal pipe. The diameter of the Venturi neck is 3 cm, and the measured pressure drop is 5.1 kPa. Taking the discharge coefficient to be 0.98, determine the volume flow rate of water and the average velocity through the pipe. 5 cm 3 cm Differential pressure gage Is The volume flow rate...
9. (10 points) An orifice meter with a 1.5 inch diameter opening is used to measure the flow rate of water through a horizontal 3 inch diameter pipe. A mercury manometer is used to measure the pressure difference across the orifice. If the differential height of the manometer is 15 inches, determine the volumetric flowrate (gal/min) of water through the pipe. You may assume the discharge coefficient is 0.6.
A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at speed v2 through a horizontal section of pipe whose cross-sectional area is A2-0.0589 m2 The gas has a density of ρ-1.30 kg m3 The Venturi meter has a cross sectiona area of .ם 33m and has been substituted for a section of the larger pipe. The pressure difference between the two sections is P2 P1 154 Pa....
thermaldynamics and fluid mechanics
Question 4 An orifice plate flow meter, as shown in figure Q4, is situated in a horizontal pipe of 95 cm diameter (d) in which water flows. The pressure difference between the vena contracta and flow upstream at point 1 is measured using a differential manometer. The diameter of the sharp-edged orifice (d.) is 35 cm. The coefficient of discharge for the flow meter is 0.7, and the coefficient of contraction is 0.62. Assume the density...
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle exit diameter is 1.5 cm, and the measured pressure drop is 3.3 kPa. Determine the volume flow rate of water, the average velocity through the pipe, and the head loss 1.5 cm Differential pressure gage -3 m3(s m/s The volume flow rate of...
Problem 4 (25 points) A 40 degree inclined water manometer is to measure a gauge pressure of 5000 Pa in a system involving air. The differential length on the manometer is measured with accuracy of 0.5 mm and resolution of 1 mm. Density of air compared to density of water is negligible. Specific weight of water is 9980 +/- 1% N/meter cube. The inclination angle is set to within 0.5 degrees. Calculate the design stage uncertainty in the measurement of...
fluid
Q1: A venture meter is fitted in a pipe of 30 cm diameter inclined at 40° to the horizontal to measure the flow rate of petrol having a specific gravity of 0.8. The ratio of areas of main pipe and throat is 5 and the throat is at 1 m from the inlet along its length. The difference in manometer head is 40 mm of mercury. Assuming the coefficient of discharge as 0.96. Calculate the discharge through the venture...
..Liquid water at 20°C flows through an inclined Venturi meter at a flow rate of 0,12 m²/s. The inside Assume no head loss from point 1 to point 2. A mercury manometer is used to measure the pressure ipe diameter is reduced from 32 cm at point I to 16 cm at point 2. Point 1 is 28 cm lower than point 2. difference, as shown in the sketch. (a) Calculate the Reynolds number of the flow in the pipe...
Most questions answered within 3 hours.
-
The marketing class at CSUS had an average score of 150. An
educational analyst determined that...
asked 24 minutes ago -
Justin Case has purchased a $250 000 home by putting 20 % down
and taking out...
asked 35 minutes ago -
1. In a labor market, marginal cost for a firm is
____________.
a. recruiting cost
b....
asked 1 hour ago -
On January 1, 2019, ABC Company issued $60,000,000 of 20-year,
10.5% bonds when the market rate...
asked 1 hour ago -
39.4% of US homes continue to use a landline in addition to cell
phone service. 3...
asked 2 hours ago -
Starting with benzene, synthesize 1-phenyl-1-butyne.
Show intermediates and reagents.
asked 3 hours ago -
Create a 32-run crossed array design with six control factors
and two noise factors such that...
asked 3 hours ago -
A 500g sample of sand from source A has the following amounts
retained on each sieve....
asked 4 hours ago -
In
your own words, please explain the essay by John Keynes wrote "The
End of Laissez...
asked 3 hours ago -
How are the matrix and pixels related? Why are smaller
pixels better for diagnostic quality?
asked 4 hours ago -
2. An AC generator has 80 rectangular loops on
its armature. Each loop is 11 cm...
asked 4 hours ago -
Please help me with this question. Consider Aldi’s current and
potential geographic markets (see Exhibit 4...
asked 4 hours ago