Nitrogen in a rigid, insulated tank with a volume of 15m^3 is initially at a pressure...
Homework Answers
Add Answer to:
Nitrogen in a rigid, insulated tank with a volume of 15m^3 is
initially at a pressure...
An insulated, rigid tank that is initially evacuated is connected by a valve to a nitrogen...
An insulated, rigid tank that is initially evacuated is connected by a valve to a nitrogen supply line. The nitrogen in the line flows at 30°C and 80 kPa. The valve is then opened and nitrogen flows into the tank until the pressure reaches 80 kPa; at which point the valve is closed. Using constant specific heats at room temperature (Cp = 1.039 kJ/kgK, Cv = 0.743 kJ/kgK, k. = 1.3984), determine the final temperature of the nitrogen in the...
Problem 3. (10 points) A closed and insulated rigid tank (perfectly insulated) is initially divided into...
Problem 3. (10 points) A closed and insulated rigid tank (perfectly insulated) is initially divided into halves by a separator. On one side of the separator is 1 m of air at 300 K, 2 bar. On the other side is 1 m of air at 500 K, 1 bar. The separator is removed, and the air from the two sides mixes and reaches equilibrium state Please treat the air as ideal gas with cp-1.001 kJ/kg K and c0.714 kJ/kg...
Question 20 A rigid, well Insulated tank of volume 0.9 m3 is initially evacuated. At timet,...
Question 20 A rigid, well Insulated tank of volume 0.9 m3 is initially evacuated. At timet, air from the surroundings at a pressure of 1 bar and temperature of 27 begins to flow into the tank, An electric resistor transfers energy to the air in the tank at a rate of 676 Watts. Determine the time required for the temperature of air inside the tank to reach 457 C at the same Initial pressure of 1 bar. Note: Please upload...
An insulated, rigid tank whose volume is 0.5 m^3 is connected by a valve to a...
An insulated, rigid tank whose volume is 0.5 m^3 is connected by a valve to a large vessel holding steam at 40 bar, 500 C. the tank is initially evacuated, the value is opened only as long as required to fill the tank with steam to a pressure of 20 bar. determine the final temperature of the steam in the tank, in C, and the final mass of the steeam in the tank, in Kg.
Thermodynamics 1. (correct answer: 0.080595 ) Initially, an insulated rigid tank contains 20 kg of water...
Thermodynamics 1. (correct answer: 0.080595 ) Initially, an insulated rigid tank contains 20 kg of water at 29.5oC and 101 kPa. The tank also contains a 4.86 kg aluminum block at 93.2oC. Using constant specific heats evaluated at 300 K, determine the total entropy production (kJ/K) after an hour assuming thermal equilibrium is achieved. 2. Correct Answer: 8.0087 ± 0.1% Steam at 1 MPa, 593.2oC, expands in a turbine to 0.01 MPa. If the process is isentropic, find the specific...
4-40 4.40 A rigid, insulated tank consists of two compartments of equal volume separated by a...
4-40
4.40 A rigid, insulated tank consists of two compartments of equal volume separated by a valve. Initially, one compartment contains air at a pressure of 750 kPa and a temperature of 50°C, while the second compartment is completely empty. The valve is opened and it remains open until the two compartments reach pressure and temperature equilibrium. Determine the final pressure and temperature of the air, assuming each compartment has a volume of 0.65 m'.
SP04 A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a saturated...
SP04 A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a saturated water vapor (quality of 1.0) at a pressure of 3 bars (300 kPa). The tank is connected to a supply line containing steam at a pressure of pL- 10 bars (1000 kPa) and a temperature of TL 500°C. The valve is opened and 2.0 kg of steam enters the rigid tank, after which the valve is closed. The pressure is measured after the valve...
NEED HELP A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a...
NEED HELP
A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a saturated water vapor (quality of 1.0) at a pressure of 3 bars (300 kPa). The tank is connected to a supply line valve is opened and 2.0 kg of steam enters the rigid tank, after which the valve is closed. The pressure is measured after the valve is closed and it is found that p2-5 bars (500 kPa). Find (a) the state of the...
Problem 3-2 A rigid, well-insulated tank consists of two compartments eparated by a valve, one being...
Problem 3-2 A rigid, well-insulated tank consists of two compartments eparated by a valve, one being twice the volume of the other. Initially, the smaller compartment contains 10 kg of nitrogen at 6 bar and 100°C, while the larger one is evacuated. The valve is opened and the gas expands to fill the total volume, eventually achieving an equilibrium state. Calculate: a) The final temperature, in K. b) The final pressure, in bar, c) The total exergy destroyed, in kJ...
An initially empty, well insulated, rigid tank with a volume of 2 m3 is fitted with...
An initially empty, well insulated, rigid tank with a volume of 2 m3 is fitted with a mixing device. The tank has two inlets and zero outlets. One inlet is water at 1 MPa and 600◦C while the other is saturated liquid water. Both enter the tank slowly. If the amount of work done by the mixing device is 300 kJ, what must the temperature of the saturated liquid water be if the same mass is added through both inlets...
An insulated, rigid tank that is initially evacuated is connected by a valve to a nitrogen supply line. The nitrogen in the line flows at 30°C and 80 kPa. The valve is then opened and nitrogen flows into the tank until the pressure reaches 80 kPa; at which point the valve is closed. Using constant specific heats at room temperature (Cp = 1.039 kJ/kgK, Cv = 0.743 kJ/kgK, k. = 1.3984), determine the final temperature of the nitrogen in the...
Problem 3. (10 points) A closed and insulated rigid tank (perfectly insulated) is initially divided into halves by a separator. On one side of the separator is 1 m of air at 300 K, 2 bar. On the other side is 1 m of air at 500 K, 1 bar. The separator is removed, and the air from the two sides mixes and reaches equilibrium state Please treat the air as ideal gas with cp-1.001 kJ/kg K and c0.714 kJ/kg...
Question 20 A rigid, well Insulated tank of volume 0.9 m3 is initially evacuated. At timet, air from the surroundings at a pressure of 1 bar and temperature of 27 begins to flow into the tank, An electric resistor transfers energy to the air in the tank at a rate of 676 Watts. Determine the time required for the temperature of air inside the tank to reach 457 C at the same Initial pressure of 1 bar. Note: Please upload...
4-40
4.40 A rigid, insulated tank consists of two compartments of equal volume separated by a valve. Initially, one compartment contains air at a pressure of 750 kPa and a temperature of 50°C, while the second compartment is completely empty. The valve is opened and it remains open until the two compartments reach pressure and temperature equilibrium. Determine the final pressure and temperature of the air, assuming each compartment has a volume of 0.65 m'.
SP04 A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a saturated water vapor (quality of 1.0) at a pressure of 3 bars (300 kPa). The tank is connected to a supply line containing steam at a pressure of pL- 10 bars (1000 kPa) and a temperature of TL 500°C. The valve is opened and 2.0 kg of steam enters the rigid tank, after which the valve is closed. The pressure is measured after the valve...
NEED HELP
A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a saturated water vapor (quality of 1.0) at a pressure of 3 bars (300 kPa). The tank is connected to a supply line valve is opened and 2.0 kg of steam enters the rigid tank, after which the valve is closed. The pressure is measured after the valve is closed and it is found that p2-5 bars (500 kPa). Find (a) the state of the...
Problem 3-2 A rigid, well-insulated tank consists of two compartments eparated by a valve, one being twice the volume of the other. Initially, the smaller compartment contains 10 kg of nitrogen at 6 bar and 100°C, while the larger one is evacuated. The valve is opened and the gas expands to fill the total volume, eventually achieving an equilibrium state. Calculate: a) The final temperature, in K. b) The final pressure, in bar, c) The total exergy destroyed, in kJ...
Most questions answered within 3 hours.
-
1 point) Given the significance level α=0.01 find the following:
(a) left-tailed z value z= (b)...
asked 1 minute from now -
Calculate the expected value, the variance, and the standard
deviation of the given random variable X....
asked 41 seconds ago -
Assume that in a hydrogen atom, the electron circles the nucleus
in a circle of radius...
asked 4 minutes ago -
Describe two obstacles that makes fixing atmospheric nitrogen
difficult.
asked 9 minutes ago -
T
F 53) Most differences
between human groups are the result of biology rather than
culture....
asked 14 minutes ago -
A 5.20 mW helium neon laser emits a visible laser beam with a
wavelength of 633...
asked 17 minutes ago -
Assignment:
Your
organization has made a strategic decision
to
outsourcework
currently performed in house. You have...
asked 16 minutes ago -
A hospital performs 100 surgeries per week. The probability that
complications after surgery occur is 10%....
asked 16 minutes ago -
In preparing its cash flow statement for the year ended December
31, 2018, Green Co. gathered...
asked 18 minutes ago -
Donna is 18 years old and full time accounting student.She is
saving for an overseas holiday...
asked 18 minutes ago -
Service-oriented architectures (SOA) provide
object-oriented architectures for web platforms that represent a
collection of services. SOA...
asked 19 minutes ago -
Le Terroir Winery is considering an expansion project to produce
fine wines. The trial expansion will...
asked 28 minutes ago