The detailed solution is given below.
Please give THUMBS UP if you have liked it.
For the bearing application specifications given in Table A, determine the Basic Load Rating for a...
Problem #2 (50 point): A certain application requires a ball bearing with the inner ring rotating, with a design life of 40000 hr at a speed of 350 rev/min. The radial load is 2.15 kN and an application factor of 1.3 is appropriate. The reliability goal is 0.90. Find the multiple of rating life required, Xo, and the catalog rating Cio with which to enter a bearing table. Choose a 02-series deep-groove ball bearing from Table 11-2, and estimate the...
If we desire that a AFBMA system ball bearing can take a radial load F 5 kN with a design Li life of 15000 hours at a speed of 3600 rpm. The application factor is ar-I.2. If the bearing maker's catalog ratingss are based on a L life of/ million revolutions. The three Weibull parameters are x, -0.02, (0-x,)- 4.439, and b-1483 The minimum required catalog (for / millionrevolutions) loaa rating C0 should be equal to )(A) A s V....
2) (15 pts] Determine the catalog rating for a ball bearing Timken rates its bearings for 3000 hours at 500 rev/min. Determine the catalog rating for a ball bearing running for 10000 hours at 1800 rev/min with a load of 2 kN with a reliability of 90 percent. The catalog rating (C10) for a ball bearing is KN
5. Bearing life prediction. (20 points) A 02-series Score: with a 50 mm bore (sce Tables 11-1 and 11-2 for specifications) is loaded with a 2.6 kN radial load and a 4.17 KN axial load. The inner ring rotates at 1450 rev/min. The application es single-row angular contact b factor is a,1.3. C1) Determine the equivalent radial load that will be experienced by this particular bearing. (2) Determine the predicted life (in hours) that this bearing could be _expectedtogvein this...
A deep-grove ball bearing has the basic load rating of 3 kN, the rated speed of 500 rpm and rated life of 3000 hours. If this bearing is designed to support a radial load of 1200 N and with the speed of 400 rpm, what is the L10 life of the bearing?
A 02-series angular contact ball bearing with a 10-mm bore is loaded with a 0.3604 kN axial load and 100 kN radial load. The inner ring rotates at 8000 rev/min and working 2000-hour service. For Rd = 93% and af = 1. (a) Determine the equivalent radial load that will be experienced by the bearing. (b) Consider a rating rated life of 10^6 revolutions find C10 load experienced by bearing and calculate the factor of safety in carrying the load...
A radial, deep grove ball bearing is specified from a manufacturer’s catalog based on a L10 life of 106 cycles. The bearing has a basic load rating of 2,500 N and is to be used in an application where the design radial load is 350 N and the axial load is zero. What is the predicted life (hours of the bearing if the inner race of the bearing rotates at 1,800 rpm? A.70 B. 3,400 C. 200,000 D. 160
Problem1 Two ball bearings from different manufacturers arc bcing considcred for a certain application. Bearing A has a catalog rating of 2.0 kN based on a catalog rating system of 3 000 hours at 500 rev/min. Bearing B has a catalog rating of 7.0 kN based on a catalog that rates at 10° cycles. For a given application, determine which bearing can carry the larger load
6. For the bearing with the largest radial load and without knowing the shaft diameter, what would be the catalog rating for a radially loaded ball bearing to withstand 1000 x 10e6 cycles with 90% reliability. The bearing manufacturer rates its bearing for a million cycles. 7. A 10 mm diameter steel shaft is subject to bending stresses only. The material has Sut = 1100 MPa and Sy = 950 MPa and a fine-ground surface finish. 1. Determine the factor...
mechanical Desgin 2 11 - 20: A single-row deep-groove ball bearing with a 65-mm bore (see Tables 11-1 for specifications) is loaded with a 3-KN axial load and a 7-KN radial load. The outer ring rotates at 500 rev/min. (a) Determine the equivalent radial load that will be experienced by this particular bearing. (b) Determine whether this bearing should be expected to carry this load with a 95 percent reliability for 10 kh.