mechanical Desgin 2 11 - 20: A single-row deep-groove ball bearing with a 65-mm bore (see...
5. Bearing life prediction. (20 points) A 02-series Score: with a 50 mm bore (sce Tables 11-1 and 11-2 for specifications) is loaded with a 2.6 kN radial load and a 4.17 KN axial load. The inner ring rotates at 1450 rev/min. The application es single-row angular contact b factor is a,1.3. C1) Determine the equivalent radial load that will be experienced by this particular bearing. (2) Determine the predicted life (in hours) that this bearing could be _expectedtogvein this...
A 02-series angular contact ball bearing with a 10-mm bore is loaded with a 0.3604 kN axial load and 100 kN radial load. The inner ring rotates at 8000 rev/min and working 2000-hour service. For Rd = 93% and af = 1. (a) Determine the equivalent radial load that will be experienced by the bearing. (b) Consider a rating rated life of 10^6 revolutions find C10 load experienced by bearing and calculate the factor of safety in carrying the load...
tables that would help u Q-4 An 02-series single-row deep-groove ball bearing with a 30-mm bore (see Tables 11-1 and 11-2 for specifications) is loaded with a 2-kN axial load and a 5-KN radial load. The inner ring rotates at 400 rev/min. (a) Determine the equivalent radial load that will be experienced by this particular bearing. [15 pts.] (6) Determine the predicted life (in revolutions) that this bearing could be expected to give in this application with a 99 percent...
HW Bearings 4 Required information A 02-series single-row deep-groove ball bearing is to be selected from Table 11-2 for the application conditions specified in the lable. Assume Table 11-1 is applicable if neetded. The value of radial oad F-10 kN, axial led Fa-5 kN, design life 12 kh and 300 revimin, ring rotation factor V-1.0, and reliabilty Ro-0.98 ら:5kN- actor V 25 NOTE. This is a multi-part question Once an answer is suibrnited, you waill be unable to return t...
An angular contact ball bearing with outer ring stationary is loaded with a 2,8 kN axial load and a 6,4 kN radial load. The inner ring 13. rotates at 480 revimin. Application factor is 1. Desired life is 20 kh under 90% reliability (C10=62 KN CO=36 kN). Evaluate the equivalent radial load factor (e) A) 0 273 B) 0.263 C) 0,275 D) 0.265 E) 0.277
) Given: You have to use a series 02 deep grove ball bearing with a C10 rating of 30.7KN and a catalog life rating of 106 cycles. The inner ring rotates and the reliability is 90%. You want the bearing to last 4000hrs at 1200RPM. What is the Fo (desgin rating). Given: You have to use a standard series 02 deep groove ball bearing. Your design radial force is 650Lb and your design life is 25Khrs. The torque being transmitted...
A Bearing A is a deep groove type and bearing B is an angular contact sölid shaft is mounted on two Single-Row 02-Seri es Ball bearings The radial loads are Fr2472N, FR 3422N, axial load is Pa and the minimum static rating is 11000N. The design characteristics are speed of 500rpm, d application factor is 1.25,xo 0.02,-4.459, b- 1.483,a reliability of each bearing is to be at least 95.0%. The inner rings sign life of 10000hr, manufacturer rated life 10....
Table 11-2 Dimensions and Load Ratings for Single-Row 02-Series Deep-Groove and Angular-Contact Ball Bearings Load Ratings, kN Fillet Shoulder Width, Radius, Deep Groove Angular Contact Bore, OD, Diameter, mm ds C10 с. Сто Co mm mm mm mm 10 30 9 0.6 12.5 27 5.07 2.24 4.94 2.12 12 32 10 0.6 28 6.89 3.10 7.02 3.05 14.5 15 35 11 0.6 17.5 31 7.80 3.55 8.06 3.65 17 40 12 0.6 19.5 34 9.56 4.50 9.95 4.75 20 47...
Problem #2 (50 point): A certain application requires a ball bearing with the inner ring rotating, with a design life of 40000 hr at a speed of 350 rev/min. The radial load is 2.15 kN and an application factor of 1.3 is appropriate. The reliability goal is 0.90. Find the multiple of rating life required, Xo, and the catalog rating Cio with which to enter a bearing table. Choose a 02-series deep-groove ball bearing from Table 11-2, and estimate the...
HW Bearlngs Required information A 02-series single-row deeo-groove oall bearing is to oe selected trom lable 11-2 tor t conditions specited in the tableme Talble 11-1 is applicable if needed The value of raa oad Fr 8 kN, axial load Fa kN, design life LD10ringrotation factor V12 and eliability R 0.9a NOTE: This is a mult-part question. Once an answer is submitted, you will be unable to return to this part. the application 25 poimts Assuming that the values taken...