what is considered a restrained
a. 2 side rails up
b. 4 side rail up
c.3 side rail up
d. bed in the chair position
Restraints prevent free movement of patients.
Side rails are considered as restraints if it is not recommended by patient or bystanders. However, in particular 4 side rail up is considered as wrist restraints which restricts movement.
Answer (B)
what is considered a restrained a. 2 side rails up b. 4 side rail up c.3...
plane is roughly level. Lay the spirit level across the two rails and level them using the levelling feet. Now put the spirit level along one rail and adjust the support rod to 2. 3. level the rail. se on the rails at the support rod end and mark its position. Then make similar mark 1.2 meters along the rail. easure up from the bench to the underside of the front rail at each mark and record the heights a,...
B. Side lying in bed C. Sitting in a recliner chair U. Sitting on the side of the bed and leaning on an overbed table Q19. The nurse performs an adm performs an admission assessment on a client with a diagnosis of uberculosis. The nurse should check the results of which diagnostic test that confirm this diagnosis? A. Chest X-ray B. Bronchoscopy C. Sputum culture D. Tuberculin skin test U20. A 38-year-old client is admitted to the hospital with respiratory...
add
rationale
Textbook of Basic Nursing, 17th... X important or what they are. Explain to him the purposes of his exercises and how to do them. How would you lead him through some exercises? NCLEX-STYLE REVIEW QUESTIONS 1. The mrse is caring for a client who is having difficulty with mobility. What action taken by the nurse can assist the client with regaining mobility? a. Promote self-care activities b. Perform tasks for the client. c. Reassure the client that she...
2) A rail gun is a weapon that uses magnetic forces to propel a rail up to very high speeds. To accomplish this, a conducting rail is free to slide along conducting wires bent into a U-shape. We will assume that the rail has a resistance of 10Ω and length of 20cm, and we have a very large, IT, magnetic field passing perpendicularly through the rectangular loop created by the rail and wires. There is a switch which can be...
what standard safety precaution should be implemented for all patient s? a call light within in reach at all time b. 4 side of rail up c. patient bed height raised to request patient d fall Alam
Consider a 1-m conducting rod attached at each end by conducting rails. The rails are connected at the top and the total loop has a resistance of 3-Ohms. (see figure below). The rod falls to the ground at a constant velocity. v. The apparatus is inside a constant magnetic field, B = 2.0 T (directed out of the page). The mass of the rod is 0.5kg. B = 2:0 T (out of R=5 1 m D VE a) What is...
2-3-4 and Red Black Trees. Do these side by side: Insert the following into a 2-3-4 and Red black tree: {60, 56, 72, 39, 57, 41, 97, 85, 20, 18, 10, 16} (Show your steps etc.) Theory here Explain, from your own observation in a. what it means that the two trees are considered ‘equivalent’. Theory here
Question 2 (25 points) The Fence Company is setting up a new production line to create top rails. The relevant data for two alternatives are shown below. Flow Line Manufacturing Cell Installed Cost Expected Life Salvage Value Variable Cost per Top Rail $15,000 5 years $0 $6.00 $10,000 5 years $0 $7.00 Based on MARR of 8%, determine the annual rate of production for which the alternatives are equally economical. Oa) 2153 units Ob) 1553 units Oc) 1253 units d)...
Two straight rail lines intersect at point B, and are to be joined by a circular curve. The centreline of the rails must pass through point D which is a signalling switch. The bearing of the first line is 70° 00'00" and the bearing of the second line is 123° 00'00". Point D is located exactly 78° 28' 10" at a distance of 118.594 metres from the first tangent point. a) (6 marks) Calculate the exact radius for the centreline...
Consider a 1-m conducting rod attached at each end by conducting
rails. The rails are connected at the top and the total
loop has a resistance of 3-Ohms. (see figure
below). The rod falls to the ground at a constant
velocity, v. The apparatus is inside a constant magnetic
field, B = 2.0 T (directed out of the page). The mass of
the rod is 0.5kg.
a) What is the magnetic force on the falling rod, due
to the magnetic field?
b) What is the induced...