Homework Answers
Add Answer to:
Please help
2. Pipes 1, 2, 3, and 4 have lengths of 300 m,240 m, 210...
Paton P'S 2 107 3.6 The inlet of a cast iron pipe, 120 m long and...
Paton P'S 2 107 3.6 The inlet of a cast iron pipe, 120 m long and 150 mm a dam. The pipe is 1/25 slope and contains a 90 bend (R/d = 1,0) diameter is 2 m below the wa.ter level of laid with a and the water exits to the atmosphere. Take the water temperature B.S 20 C (then 10 kg/ms) and determine the flow rate. [0,045 m2/s] 3.7 Water is discharged from a reservoir through a sharp outlet...
You have pipes of various lengths and openings and want to select 2 pipes (1 open-open...
You have pipes of various lengths and openings and want to select 2 pipes (1 open-open and 1 open-closed) so your 440 Hz tuning fork will vibrate both perfectly at their first resonant points. The speed of sound in air is 343 m/s. a) What are the lengths of each of these two pipes? b) Draw a picture of the wave in both pipes and clearly indicate the nodes and antinodes of the wave inside both pipes. 1 c) How...
39. (a) Water flows under gravity from Reservoir A to Reservoir B first through a 900-m long pipe (pipe a) and then thr...
39. (a) Water flows under gravity from Reservoir A to Reservoir B first through a 900-m long pipe (pipe a) and then through two pipes (b and c) in parallel. The lengths, diameters and friction factors of the pipes are listed in the table. The water level in Reservoir A is always higher than that in Reservoir B by 20 m. Calculate the total discharge between the reservoirs. Neglect all minor losses. (15 marks) (b) Which of pipes b and...
You have pipes of various lengths and openings and want to select 2 pipes (1 open-open...
You have pipes of various lengths and openings and want to select 2 pipes (1 open-open and 1 open-closed) so your 440 Hz tuning fork will vibrate both perfectly at their first resonant points. The speed of sound in air is 343 m/s. a) What are the lengths of each of these two pipes? b) Draw a picture of the wave in both pipes and clearly indicate the nodes and antinodes of the wave inside both pipes. c) How much...
course name hydraulics 1. Two Galvanized iron (e= 0.15 mm) pipes in series connecting two reservoirs....
course name hydraulics
1. Two Galvanized iron (e= 0.15 mm) pipes in series connecting two reservoirs. First pipe is 400 m long and has diameter of 1.0 m (see next figure). The second pipe is 250 m long and has diameter of 0.70 m. The elevation of the water surface in thereservoir B is 50.00 m. The discharge from reservoir A to reservoir B is 1.0 m3/s. Thewater viscosity is 1.5 x 10-6 m/s. A gate valve is installed on...
4. Figure 2 shows two reservoirs which are connected by three pipes of different diameters. The...
4. Figure 2 shows two reservoirs which are connected by three pipes of different diameters. The length and diameter of each pipe are given in Table 1. The flow rate in the pipeline is 55 Ls. The entrance and exit from the pipes are sharp and the change between the pipelines in the cross sections is sudden. Assume the friction factor, /for the pipes as 0.01. (a) Analyse all the head losses which occur, giving an expression for each. (7...
Please do part 2 1. For the parallel pipe system shown, each pipe is cast iron,...
Please do part 2
1. For the parallel pipe system shown, each pipe is cast iron, and the pressure drop from point 1-to-2 is 15 lbf/in. Compute the total flow rate from 1 to 2 assuming minor losses are negligible. The fluid is water at 20°C. D = 4 in; L = 200 ft D = 3 in; L = 175 ft 2. If the two pipes in problem 1 are installed in series with the 4-in pipe upstream of...
6. a) Two different wires (materials 1 & 2) have lengths 1 and 2 and associated...
6. a) Two different wires (materials 1 & 2) have lengths 1 and 2 and associated diameters di and If the resistance R of the wires is to be the same show the relationship between their diameters is given by dz =d, P2h VPL b) Using the above result, determine the diameter of a nichrome wire (p=96 x 10 - Qm) of length 4 mifit is to have the same resistance has a copper wire (p=1.72 x 10- m) whose...
A pipe network is given below (Figure 2). All pipes are 1 km long, and 500...
A pipe network is given below (Figure 2). All pipes are 1 km long, and 500 mm in diameter, with friction factor of 0 018 Determine the following. a) The value of Q (3) b) The correct flows in each pipe (using the Hardy-cross method) after the (17) first iteration [Hint: Assume Qo for pipe AB 105 L/s] c) The pressure heads at each node if the pressure head at reservoir A is 80 m. The elevation of each node...
Parallel system and determine the 0.05 m/s flow distribution for a 4 parallel pipe system when Qi...
example provided
parallel system and determine the 0.05 m/s flow distribution for a 4 parallel pipe system when Qin D, mm 50 75 100 125 L, m 50 100 150 200 Element 0.02 0.03 0.02 0.03 2.5 Assuming that 0 is known, the unknowns in the above equations are Q1, 02, and are solved simultaneously in the manner shown in the following example. and ΔΗ H,-H, EXAMPLE 10.4 Find the flow distribution and change in hydraulic grade line for the...
Paton P'S 2 107 3.6 The inlet of a cast iron pipe, 120 m long and 150 mm a dam. The pipe is 1/25 slope and contains a 90 bend (R/d = 1,0) diameter is 2 m below the wa.ter level of laid with a and the water exits to the atmosphere. Take the water temperature B.S 20 C (then 10 kg/ms) and determine the flow rate. [0,045 m2/s] 3.7 Water is discharged from a reservoir through a sharp outlet...
You have pipes of various lengths and openings and want to select 2 pipes (1 open-open and 1 open-closed) so your 440 Hz tuning fork will vibrate both perfectly at their first resonant points. The speed of sound in air is 343 m/s. a) What are the lengths of each of these two pipes? b) Draw a picture of the wave in both pipes and clearly indicate the nodes and antinodes of the wave inside both pipes. 1 c) How...
39. (a) Water flows under gravity from Reservoir A to Reservoir B first through a 900-m long pipe (pipe a) and then through two pipes (b and c) in parallel. The lengths, diameters and friction factors of the pipes are listed in the table. The water level in Reservoir A is always higher than that in Reservoir B by 20 m. Calculate the total discharge between the reservoirs. Neglect all minor losses. (15 marks) (b) Which of pipes b and...
You have pipes of various lengths and openings and want to select 2 pipes (1 open-open and 1 open-closed) so your 440 Hz tuning fork will vibrate both perfectly at their first resonant points. The speed of sound in air is 343 m/s. a) What are the lengths of each of these two pipes? b) Draw a picture of the wave in both pipes and clearly indicate the nodes and antinodes of the wave inside both pipes. c) How much...
course name hydraulics
1. Two Galvanized iron (e= 0.15 mm) pipes in series connecting two reservoirs. First pipe is 400 m long and has diameter of 1.0 m (see next figure). The second pipe is 250 m long and has diameter of 0.70 m. The elevation of the water surface in thereservoir B is 50.00 m. The discharge from reservoir A to reservoir B is 1.0 m3/s. Thewater viscosity is 1.5 x 10-6 m/s. A gate valve is installed on...
4. Figure 2 shows two reservoirs which are connected by three pipes of different diameters. The length and diameter of each pipe are given in Table 1. The flow rate in the pipeline is 55 Ls. The entrance and exit from the pipes are sharp and the change between the pipelines in the cross sections is sudden. Assume the friction factor, /for the pipes as 0.01. (a) Analyse all the head losses which occur, giving an expression for each. (7...
Please do part 2
1. For the parallel pipe system shown, each pipe is cast iron, and the pressure drop from point 1-to-2 is 15 lbf/in. Compute the total flow rate from 1 to 2 assuming minor losses are negligible. The fluid is water at 20°C. D = 4 in; L = 200 ft D = 3 in; L = 175 ft 2. If the two pipes in problem 1 are installed in series with the 4-in pipe upstream of...
6. a) Two different wires (materials 1 & 2) have lengths 1 and 2 and associated diameters di and If the resistance R of the wires is to be the same show the relationship between their diameters is given by dz =d, P2h VPL b) Using the above result, determine the diameter of a nichrome wire (p=96 x 10 - Qm) of length 4 mifit is to have the same resistance has a copper wire (p=1.72 x 10- m) whose...
A pipe network is given below (Figure 2). All pipes are 1 km long, and 500 mm in diameter, with friction factor of 0 018 Determine the following. a) The value of Q (3) b) The correct flows in each pipe (using the Hardy-cross method) after the (17) first iteration [Hint: Assume Qo for pipe AB 105 L/s] c) The pressure heads at each node if the pressure head at reservoir A is 80 m. The elevation of each node...
example provided
parallel system and determine the 0.05 m/s flow distribution for a 4 parallel pipe system when Qin D, mm 50 75 100 125 L, m 50 100 150 200 Element 0.02 0.03 0.02 0.03 2.5 Assuming that 0 is known, the unknowns in the above equations are Q1, 02, and are solved simultaneously in the manner shown in the following example. and ΔΗ H,-H, EXAMPLE 10.4 Find the flow distribution and change in hydraulic grade line for the...
Most questions answered within 3 hours.
-
For a nonpolar solute, why does the mobile phase strength
increase as the solvent becomes less...
asked 19 seconds ago -
The times per week a student uses a lab computer are normally
distributed, with a mean...
asked 7 minutes ago -
Discuss the topic of Health Care as a right or a
privilege. Articulate both sides? What...
asked 19 minutes ago -
M (OH)2 has Ksp =6.85x10^-12.
part A: what is the solubility of M (OH)2 in
water?...
asked 18 minutes ago -
Fixed costs are expenses that are not affected by consumer
demand, so they can be estimated...
asked 23 minutes ago -
Lead(II) nitrate and ammonium iodide react to form lead(II)
iodide and ammonium nitrate according to the...
asked 19 minutes ago -
IN JAVA!! THANK YOU
Assignment Overview
You are to include both of these recursive assignments in...
asked 22 minutes ago -
1. One way to make sure that your essay will have enough support
is to start...
asked 20 minutes ago -
Suppose there are 1000 students in a business administration
program. 620 students are in an IT...
asked 39 minutes ago -
No matter how a company measures the benefits provided
by an online business implementation, it usually...
asked 36 minutes ago -
Let G be an undirected graph and let X be a subset of the
vertices of...
asked 39 minutes ago -
Calculate the effective radiation dosage in rems for a 75 ‑kg
person who is exposed to...
asked 57 minutes ago