Homework Answers
Add Answer to:
39. (a) Water flows under gravity from Reservoir A to Reservoir B first through a 900-m long pipe (pipe a) and then thr...
(b) Water flows under gravity between two reservoirs through a pipe of length 5000m. The diameter of the pipe is 0.2 m...
(b) Water flows under gravity between two reservoirs through a pipe of length 5000m. The diameter of the pipe is 0.2 m and the roughness size is 0.04 mm. The water levels in the two reservoirs are maintained with a difference of 50 m. Determine the discharge through the pipe. Neglect all minor losses. Use the attached Moody diagram for estimation of friction factor. (10 marks) (c) In (b), now include entry loss at the upper reservoir with loss coefficient...
35. (a) A reservoir A discharges water to a lower reservoir B through a 3600 m long pipe of diameter 600 mm. The flow i...
35. (a) A reservoir A discharges water to a lower reservoir B through a 3600 m long pipe of diameter 600 mm. The flow is due to gravity and the difference in surface water levels in A and B is 13 m. Reservoir A is now required to supply water also to a third reservoir C, the water surface of which is 15 m below that of A. The discharge to C is to be made from a 1200 m...
A pipeline transfers water from Reservoir A to Reservoir B. The difference in water-surface elevations between...
A pipeline transfers water from Reservoir A to Reservoir B.
The difference in water-surface elevations between the two
reservoirs is 20 m.
The lengths of pipes 1, 2 and 3 are 1500 m, 2000 m, and 2800 m,
respectively.
The diameter of pipe 1 is 200 mm,
The diameter of pipe 2 is 500 mm, and The diameter of pipe pipe
3 is 250 mm.
The Darcy Weisbach friction coefficient of these pipes is
0.0045.
Minor loss coefficients for pipe...
1. Water flows from Reservoir A to Reservoir B. The pipe diameter D is 1 m...
1. Water flows from Reservoir A to Reservoir B. The pipe diameter D is 1 m and the pipe length L is 300 m. H 16 m, h 2 m and the pipe friction factor is f 0.01. In your calculations consider K- 1 at the pipe outlet in tank B and neglect the loss of the inlet in tank A a. b. c. What will be the discharge in the pipe? What will be the pressure at point P...
ENCE 4322/53222 2. Reservoir A delivers to reservoir B through two uniform pipelines AJ (3000 m...
ENCE 4322/53222 2. Reservoir A delivers to reservoir B through two uniform pipelines AJ (3000 m long) and JB (4000 m long) of diameters 300 mm and 200 mm, respectively. The difference in elevation between the water level in the two reservoirs is 25 m. Just upstream of the change in section, which is assumed gradual (no minor losses), a controlled discharge of 30 L/s is taken off 3000 m 304 Assume kinematic viscosity - 1.14x10m/s, and a pipe effective...
(b) Figure Q3 shows a design of a plumbing system to be used in a new building. Water at 20°C is ...
(b) Figure Q3 shows a design of a plumbing system to be used in a new building. Water at 20°C is free to be pumped from reservoir A to another reservoir B at a higher elevation through two 30 m long pipes connected in parallel on a common elevation level. The difference between the water surface elevations is 10 m. The pipes are made of commercial brass and the diameters of the two pipes are 4 cm and 8 cm....
A reservoir A connected to B reservoir through a pipe that is 5 km long and 230 mm in diameter. The difference in water...
A reservoir A connected to B reservoir through a pipe that is 5 km long and 230 mm in diameter. The difference in water level of the two reservoirs is 70 m. At a distance of 2 km from the feeder reservoir, water is drawn at the rate of 40 litres/s . (a) Taking the friction factor as 0.008 and neglecting all other losses, determine the rate at which water enters the B reservoir. (b) Sketch the hydraulic grade line...
2. Water flows at a rate of 60 L/s from a main reservoir to a subsidiary...
2. Water flows at a rate of 60 L/s from a main reservoir to a subsidiary through a 600 m long, 185 mm diameter asphalted cast iron pipe as shown in the figure. The pipeline contains a gate valve, a globe valve and 4 standard 90° elbows. The entrance and exit are square edged, and all fittings are screwed ends, determine, You need Kinematic viscosity of water, 1 x 10-6 m/s2 (a) The friction head loss in the pipe, (b)...
Q3 (40 pts): Water is pumped through a 60-m-long, 0.3-m-diameter pipe from a lower reservoir to...
Q3 (40 pts): Water is pumped through a 60-m-long, 0.3-m-diameter pipe from a lower reservoir to a higher reservoir, which has a water surface 10 m above the lower one. When the pump adds 40 kW to the water the flowrate is 0.20 m/s. Assume the following coefficients of minor losses: • Entrance: Kentrance = 0.5 Exit: Kexit = 1 Each elbow: Kelbow = 1.5 • Valve: K= 6 Part A (20 pts) Determine the pipe roughness ε. Part B...
please solve it quickly and clearly Q3. Water is transported from reservoir A to reservoir B...
please solve it quickly and
clearly
Q3. Water is transported from reservoir A to reservoir B by using two pipes connected in series. With the following characteristics: diameters, D1 = 300 mm, D2 = 400 mm, the lengths, L1 = 100 m, L2 = 400 m friction factor, fı = f2 =0.025, minor loss coefficients, K1 =0.5, K2= 3, K3 = 1, reservoir elevations, ZA= 2.5 m, ZB= 27.5 m. Determine the discharge if; a) Minor losses are ignored b)...
(b) Water flows under gravity between two reservoirs through a pipe of length 5000m. The diameter of the pipe is 0.2 m and the roughness size is 0.04 mm. The water levels in the two reservoirs are maintained with a difference of 50 m. Determine the discharge through the pipe. Neglect all minor losses. Use the attached Moody diagram for estimation of friction factor. (10 marks) (c) In (b), now include entry loss at the upper reservoir with loss coefficient...
35. (a) A reservoir A discharges water to a lower reservoir B through a 3600 m long pipe of diameter 600 mm. The flow is due to gravity and the difference in surface water levels in A and B is 13 m. Reservoir A is now required to supply water also to a third reservoir C, the water surface of which is 15 m below that of A. The discharge to C is to be made from a 1200 m...
A pipeline transfers water from Reservoir A to Reservoir B.
The difference in water-surface elevations between the two
reservoirs is 20 m.
The lengths of pipes 1, 2 and 3 are 1500 m, 2000 m, and 2800 m,
respectively.
The diameter of pipe 1 is 200 mm,
The diameter of pipe 2 is 500 mm, and The diameter of pipe pipe
3 is 250 mm.
The Darcy Weisbach friction coefficient of these pipes is
0.0045.
Minor loss coefficients for pipe...
1. Water flows from Reservoir A to Reservoir B. The pipe diameter D is 1 m and the pipe length L is 300 m. H 16 m, h 2 m and the pipe friction factor is f 0.01. In your calculations consider K- 1 at the pipe outlet in tank B and neglect the loss of the inlet in tank A a. b. c. What will be the discharge in the pipe? What will be the pressure at point P...
ENCE 4322/53222 2. Reservoir A delivers to reservoir B through two uniform pipelines AJ (3000 m long) and JB (4000 m long) of diameters 300 mm and 200 mm, respectively. The difference in elevation between the water level in the two reservoirs is 25 m. Just upstream of the change in section, which is assumed gradual (no minor losses), a controlled discharge of 30 L/s is taken off 3000 m 304 Assume kinematic viscosity - 1.14x10m/s, and a pipe effective...
(b) Figure Q3 shows a design of a plumbing system to be used in a new building. Water at 20°C is free to be pumped from reservoir A to another reservoir B at a higher elevation through two 30 m long pipes connected in parallel on a common elevation level. The difference between the water surface elevations is 10 m. The pipes are made of commercial brass and the diameters of the two pipes are 4 cm and 8 cm....
2. Water flows at a rate of 60 L/s from a main reservoir to a subsidiary through a 600 m long, 185 mm diameter asphalted cast iron pipe as shown in the figure. The pipeline contains a gate valve, a globe valve and 4 standard 90° elbows. The entrance and exit are square edged, and all fittings are screwed ends, determine, You need Kinematic viscosity of water, 1 x 10-6 m/s2 (a) The friction head loss in the pipe, (b)...
Q3 (40 pts): Water is pumped through a 60-m-long, 0.3-m-diameter pipe from a lower reservoir to a higher reservoir, which has a water surface 10 m above the lower one. When the pump adds 40 kW to the water the flowrate is 0.20 m/s. Assume the following coefficients of minor losses: • Entrance: Kentrance = 0.5 Exit: Kexit = 1 Each elbow: Kelbow = 1.5 • Valve: K= 6 Part A (20 pts) Determine the pipe roughness ε. Part B...
please solve it quickly and
clearly
Q3. Water is transported from reservoir A to reservoir B by using two pipes connected in series. With the following characteristics: diameters, D1 = 300 mm, D2 = 400 mm, the lengths, L1 = 100 m, L2 = 400 m friction factor, fı = f2 =0.025, minor loss coefficients, K1 =0.5, K2= 3, K3 = 1, reservoir elevations, ZA= 2.5 m, ZB= 27.5 m. Determine the discharge if; a) Minor losses are ignored b)...
Most questions answered within 3 hours.
-
----Can someone please help me solve this one using JAVA
----I thank you in advance
Create...
asked 33 seconds from now -
1. What force primarily attracts the potassium ion to
the nitrate ion?
a. London forces...
asked 1 minute ago -
What are the negative effects of abruptly stopping the use of
all fossil fuels? Give at...
asked 7 minutes ago -
Given that many conflict are the result of different parties having
different interests, is it possible...
asked 12 minutes ago -
A 750 g block can slide uniformly along the horizontal track
when a string attached to...
asked 15 minutes ago -
In 2017, Juan entered into a contract to write a book. The
publisher advanced Juan $50,000,...
asked 29 minutes ago -
Determine the number of kinds of protons in each molecule (w/
respect to NMR spectroscopy). Drawing...
asked 39 minutes ago -
A jeweler whose near point is 68 cm from his eye uses a
magnifying glass as...
asked 37 minutes ago -
A company wants to determine how many units of each of two
products, A and B,...
asked 41 minutes ago -
The blood pressure of a person changes throughout the day.
Suppose the systolic blood pressure of...
asked 50 minutes ago -
A chemistry student desired to study sulfur. Sulfur exhibited
the following characteristics with oxygen:
(a) It...
asked 46 minutes ago -
An Atwood machine is constructed of a solid-disk frictionless
pulley of mass m3 and radius R....
asked 47 minutes ago