Homework Answers
Add Answer to:
Ex. 4 A water treatment plant with a maximum daily flow of 3 m/s (1.5 times...
A water treatment plant is processing water at a flow rate of 1.5 m/s using three parallel treatm...
A water treatment plant is processing water at a flow rate of 1.5 m/s using three parallel treatment trains. The detention times for the rapid mix tank, flocculation basin, and rectangular sedimentation basin are 10 sec, 30 min and 60 min, respectively. The velocity gradients for the rapid mix and flocculation tanks are 900 s and 60:40:20 s1, respectively. The viscosity of water is 0.001 Pa-s. (a) Determine the size and power requirements for rapid mix tanks. (b) Determine the...
Any tips or pointers? characteristics: Maximum daily flow 3 ms Average daily flow 2 m'/s Coagulant...
Any tips or pointers?
characteristics: Maximum daily flow 3 ms Average daily flow 2 m'/s Coagulant Ferric chloride Overflow Rate 3.1 m/m2h It is needed to specify the number of sedimentation basins, the basin dimensions, hydraulic retention time, horizontal velocity and outlet weir loading rate. Assume necessary data. The following items are suggested to be in your design report Title page: Design Problem title, your name, date, etc... Abstract: Contains objective statement, summarize the ma Introduction: Introducing the problem subject...
A water treatment plant is to be designed to supply a daily flow of 35000 m/d....
A water treatment plant is to be designed to supply a daily flow of 35000 m/d. The raw water is taken from a local river that has a turbid water. The main treatment units of this treatment plant are as illustrated in Figure 1: Screen River Water > Sedimentation Coagulation Flocculation Filtration Adsorption Adsor prion > Disinfection Storage Distribution Figure 1: Water treatment plant main unit The design criteria of each treatment unit is as follows: 1. Coagulation tanks (Rapid...
Water and Wastewater Treatment SP-WATER TREATMENT PLANT SEDIMENTATION BASIN Design a rectangular, horizontal flow sedimentation process...
Water and Wastewater Treatment
SP-WATER TREATMENT PLANT SEDIMENTATION BASIN Design a rectangular, horizontal flow sedimentation process for a water treatment plant for turbidity removal Design Maximum Day Flow-20,000 m2ld Two parallel sedimentation tank, each designed for half of the total flow Depth 4.5 m, Width 6 m, Surface Overflow Rate 50 m/day Chain and flight sludge collector will be used, hence the limiting width of 6 m. Minimum Hydraulic Retention Time (detention time) 2 hrs Maximum weir rate 250 m/day/m...
A drinking water treatment plant is designed with three sedimentation basins in parallel. Each basin is...
A drinking water treatment plant is designed with three sedimentation basins in parallel. Each basin is designed with an overflow rate of 1,200 gpd/ft2 (gallons per day per square foot). (“In parallel” means that the flow is split evenly between the basins as shown below.) A. If the plant flow is 20 mgd (million gallons per day), find the plan area of each basin in square feet. B. Calculate the dimensions of the basins (length and width in feet) if...
1. The design flow for a water treatment plant (WTP) is 1 MGD (3.8x103 m'/d). The...
1. The design flow for a water treatment plant (WTP) is 1 MGD (3.8x103 m'/d). The rapid mixing tank will have a mechanical mixer and the average alum dosage will be 30 mg/L theoretical mean hydraulic detention time of the tank will be 1 minute. Determine the following: a) the quantity of alum needed on a daily basis in kg/d, b) the dimensions of the tank in meters for a tank with equal length, width, and dept c) the power...
QUESTION 4 horizontal flow grit chamber with rectangular x-section for treating maximum sewage flow of 10 MIld. Assu...
QUESTION 4 horizontal flow grit chamber with rectangular x-section for treating maximum sewage flow of 10 MIld. Assume the particles settling velocity is 2.4 cm/sec, B is 0.06, fis 0.03 and particles diameter (D) is 0.02 cm. Also, take width of chamber as 1.0 m, free board as 0.3 m, grit accumulation depth as 0.25 m, specific gravity (SG) of particles as 2.65 and 2 [30] Design a mextra length for inlet and outlet works.
QUESTION 4 horizontal flow grit...
Using the values provided in Table 21-1, minimum sewage elevation in interceptor of 112.60 m, maximum...
Using the values provided in Table 21-1, minimum
sewage elevation in interceptor of 112.60 m, maximum sewage
elevation in interceptor of 112.80 m, discharge elevation to
stilling well of 116.40 m, an average design flow of 8,600
m3/d, peaking factor for peak hour of 2.8 and minimum
factor of 0.49.
A. Determine the most efficient screw pump diameter
(in m)
B. How many flights are recommended
C. How many pumps are recommended in the final design?
Typical/comment TABLE 21-1 Typical...
You are hired to design a rectangular sedimentation tank (length to width ratio = 3:1 and...
You are hired to design a rectangular sedimentation tank (length to width ratio = 3:1 and detention time ~ 2 h) for a new water treatment plant (flow rate: 0.04 m/s; temperature: 20 ). Suspended particles can be removed when the overflow rate is higher than the settling velocities of particles. You have finished characterizing the influent particles (assuming all of them are spherical) and obtained the following results: Particle diameter (m) Particle density (kg/m) Percentile 50 1.4 x 10...
You are hired to design a rectangular sedimentation tank (length to width ratio = 3:1 and...
You are hired to design a rectangular sedimentation tank (length to width ratio = 3:1 and detention time ~ 2 h) for a new water treatment plant (flow rate: 0.04 m3/s; temperature: 20 ℃). Suspended particles can be removed when the overflow rate is higher than the settling velocities of particles. You have finished characterizing the influent particles (assuming all of them are spherical) and obtained the following results: Particle diameter (m) Particle density (kg/m3) Percentile 50 1.4 x 103...
A water treatment plant is processing water at a flow rate of 1.5 m/s using three parallel treatment trains. The detention times for the rapid mix tank, flocculation basin, and rectangular sedimentation basin are 10 sec, 30 min and 60 min, respectively. The velocity gradients for the rapid mix and flocculation tanks are 900 s and 60:40:20 s1, respectively. The viscosity of water is 0.001 Pa-s. (a) Determine the size and power requirements for rapid mix tanks. (b) Determine the...
Any tips or pointers?
characteristics: Maximum daily flow 3 ms Average daily flow 2 m'/s Coagulant Ferric chloride Overflow Rate 3.1 m/m2h It is needed to specify the number of sedimentation basins, the basin dimensions, hydraulic retention time, horizontal velocity and outlet weir loading rate. Assume necessary data. The following items are suggested to be in your design report Title page: Design Problem title, your name, date, etc... Abstract: Contains objective statement, summarize the ma Introduction: Introducing the problem subject...
A water treatment plant is to be designed to supply a daily flow of 35000 m/d. The raw water is taken from a local river that has a turbid water. The main treatment units of this treatment plant are as illustrated in Figure 1: Screen River Water > Sedimentation Coagulation Flocculation Filtration Adsorption Adsor prion > Disinfection Storage Distribution Figure 1: Water treatment plant main unit The design criteria of each treatment unit is as follows: 1. Coagulation tanks (Rapid...
Water and Wastewater Treatment
SP-WATER TREATMENT PLANT SEDIMENTATION BASIN Design a rectangular, horizontal flow sedimentation process for a water treatment plant for turbidity removal Design Maximum Day Flow-20,000 m2ld Two parallel sedimentation tank, each designed for half of the total flow Depth 4.5 m, Width 6 m, Surface Overflow Rate 50 m/day Chain and flight sludge collector will be used, hence the limiting width of 6 m. Minimum Hydraulic Retention Time (detention time) 2 hrs Maximum weir rate 250 m/day/m...
1. The design flow for a water treatment plant (WTP) is 1 MGD (3.8x103 m'/d). The rapid mixing tank will have a mechanical mixer and the average alum dosage will be 30 mg/L theoretical mean hydraulic detention time of the tank will be 1 minute. Determine the following: a) the quantity of alum needed on a daily basis in kg/d, b) the dimensions of the tank in meters for a tank with equal length, width, and dept c) the power...
QUESTION 4 horizontal flow grit chamber with rectangular x-section for treating maximum sewage flow of 10 MIld. Assume the particles settling velocity is 2.4 cm/sec, B is 0.06, fis 0.03 and particles diameter (D) is 0.02 cm. Also, take width of chamber as 1.0 m, free board as 0.3 m, grit accumulation depth as 0.25 m, specific gravity (SG) of particles as 2.65 and 2 [30] Design a mextra length for inlet and outlet works.
QUESTION 4 horizontal flow grit...
Using the values provided in Table 21-1, minimum
sewage elevation in interceptor of 112.60 m, maximum sewage
elevation in interceptor of 112.80 m, discharge elevation to
stilling well of 116.40 m, an average design flow of 8,600
m3/d, peaking factor for peak hour of 2.8 and minimum
factor of 0.49.
A. Determine the most efficient screw pump diameter
(in m)
B. How many flights are recommended
C. How many pumps are recommended in the final design?
Typical/comment TABLE 21-1 Typical...
You are hired to design a rectangular sedimentation tank (length to width ratio = 3:1 and detention time ~ 2 h) for a new water treatment plant (flow rate: 0.04 m/s; temperature: 20 ). Suspended particles can be removed when the overflow rate is higher than the settling velocities of particles. You have finished characterizing the influent particles (assuming all of them are spherical) and obtained the following results: Particle diameter (m) Particle density (kg/m) Percentile 50 1.4 x 10...
Most questions answered within 3 hours.
-
find the critical value associated with a right sided hypothesis of
the mean using a sample...
asked 1 hour ago -
Which of the following statements is true with respect to a
simple linear regression model?
a....
asked 1 hour ago -
The energy required to remove an electron from a surface of a
solid element is called...
asked 3 hours ago -
How would you train your employees to avoid risks of using
mobile devices?
asked 3 hours ago -
Assume Kw = 1.01 ✕ 10−14
For pure water, we can calculate [H3O+ ] = [OH...
asked 4 hours ago -
Suppose that on a temperature scale X, water boils at 203.0°X
and freezes at -105.7°X. What...
asked 5 hours ago -
BaS crystallizes in a cubic unit cell with S2- ions on each
corner and each face....
asked 6 hours ago -
A. 0≤P(Oi)≤10≤P(Oi)≤1 for each i
B. P(Oi)≤0P(Oi)≤0
C. P(Oi)=1+P(OCi)P(Oi)=1+P(OiC)
D. P(Oi)≥1P(Oi)≥1
If an experiment consists of...
asked 7 hours ago -
A battery has an emf of 9.20V and an internal resistance of 1.20
ohm. a)What resistance...
asked 7 hours ago -
The area of an elastic circular loop decreases at a constant
rate, dA/dt = −6.60×10−3 m2/s...
asked 8 hours ago -
The denaturation of proteins can be described by the
equilibrium
F⇌U
where F and U represent...
asked 10 hours ago -
Please answer what the maximum and minimum force is, and the
angle on the ion is...
asked 10 hours ago