Design a square single column footing to support an 18 inch square interior column reinforced with...
Design a square footing to support an 18 in. square column tied interior column reinforced with 8 #9 bars. The column carries an unfactored axial dead load of 245 kips and an axial live load of 200 kips. The base of the footing is 4.0ft. below final grade and allowable soil pressure is 5 k/ft2 Use ??′ = 3.0 ksi and fy = 60.0 ksi
15.3. psi. Design a single-column footing (including dowels) to support an 11 in. square column reinforced with eight No. 9 (No. 29) bars centered 2.5 in. from the column faces (equal number of bars on each face). The unfactored axial dead load = 135 kips, and the unfactored axial live load=125 kips. For the column, f=4000 psi and f=60,000 psi. The base of the footing will be 3 ft below grade. The allowable soil bearing pressure is 3000 lb/ft2. Material...
A (9’x9’x32”) square footing is supporting 230 kips dead load and 130 kips live load from 18-in square column. The allowable bearing soil pressure is 5000 psf. There is no over-burden soil weight. Check if the footing area satisfies the soil bearing pressure requirements. Also, check if the thickness satisfies the shear ( two and one way) requirements. Finally, design the flexural steels each direction. Open book and notes Name a (9%9x32") square footing is supporting 230 kips dead load...
2. Design a square-tied reinforced concrete column to support the design loads shown below. Assume that the column must be designed with the reinforcement placed around the edges and y = 0.8. Take f.' = 4,000 psi and fy - 60,000 psi. Assume you have to use #9 bars for the longitudinal reinforcement. (35 pts.) P, - 400 kips M. -125 ft-kips
CVE 313- 1- Design a square footing for the interior column shown in the figure. The column carries 2 k 't of uniform live load and 1.5 k/t of uniform dead load (including the self weiht of the structure), the base of the footing is 5 ft below grade, the soil weight is 100 lb/ft', and q," 5000 psf. and concrete unit weight is 150 lb/ (25 points) NOTE: Your design should only include the following (one-way shear, two-way shear,...
2. Design a square spread footing for the following conditions. Service dead load is 350 kips, service live load is 275 kips. Soil density is 130 lb/ftº. Allowable soil pressure is 4500 psf. Column is 18 in. square. Geotechnical analyses have determined the width to be 13 ft. fe' = 3500 psi normal weight concrete, and fy= 60 ksi. The base of the footing is placed 5 ft below the ground surface. Note: you don't need to design the bar...
Name: Date: 2. (+35) Design a typical interior tension-reinforced T-beam to resist positive moment. Beam dimension is given. The service loads are 150 psf dead load (doesn't include the beam weight) and 350 psf live load. The beam is on a simple span of 20 ft. Use f:=4000 psi for strength concrete and fy=60000 psi for steel reinforcement. 8-0* (typ.)
1) [Design] A reinforced concrete column is to be sized to carry pure axial compressive load. According to ACI 318, what is the smallest possible cross-sectional area (Ag) that the column can use in design supporting an axial dead load of 200 kips (unfactored) and live load of 400 kips (unfactored). Use fc = 4,000 psi and fy = 60 ksi. Assume pe = 0.08 and ties for transverse reinforcement. Be sure to include the appropriate design factors and use...
S. Al-Martini, PhD, P. Eng. Question No. 5 (35minutes) 19 marks) As shown in the figure, a 9-ft 6-in square footing supporting an 18-in. -square tied concrete column and it is subjected to service dead load 225 kips, and service live load 175 kips. column is a typical interior column in a building. Assume normal-weight concrete.. soil pressure (ga) 5000 psf (5 ksf), f'e for column 4000 psi, f's for the footing lsteel 60, 000 psi. The density of the...
S. Al-Martini, PhD, P. Eng. Question No. 5 (35minutes) 19 marks) As shown in the figure, a 9-ft 6-in square footing supporting an 18-in. -square tied concrete column and it is subjected to service dead load 225 kips, and service live load 175 kips. column is a typical interior column in a building. Assume normal-weight concrete.. soil pressure (ga) 5000 psf (5 ksf), f'e for column 4000 psi, f's for the footing lsteel 60, 000 psi. The density of the...