Homework Answers
Add Answer to:
An oil preheater consists of a single tube of 30-mm diameter and 7-m length, with its...
A concentric tube heat exchanger for cooling lubricating oil consists of a thin-walled inner tube of...
A concentric tube heat exchanger for cooling lubricating oil
consists of a thin-walled inner tube of 25 mm diameter carrying
water and an outer tube of 45 mm diameter carrying the oil. The
exchanger operates in countercurrent flow with an overall heat
transfer coefficient of 55 W/m2 K and the tabulated average
properties given below. Mass flow rates of oil and water are both
0.1 kg/s, oil enters the exchanger at 100°C, and water enters the
exchanger at 30°C. (a)...
Engine oil is heated by flowing through a circular tube of diameter D = 50 mm...
Engine oil is heated by flowing through a circular tube of diameter D = 50 mm and length L = 25 m and whose surface is maintained at 150 oC. The flow rate and inlet temperature of the oil are 0.5 kg/s and 20 oC. a. Estimate the outlet temperature Tm,o. B. Average Nusselt number C. Estimate the total heat transfer rate q for the tube.
(40 points) Engine oil flows at a rate of 1 kg/s through a 5-mm diameter smooth straight tube. Th...
(40 points) Engine oil flows at a rate of 1 kg/s through a 5-mm diameter smooth straight tube. The oil has an inlet temperature of 47°C and it is desired to heat the oil to a mean temperature of 87°C at the exit of the tube. The surface of the tube is maintained at 150°C. Assuming the flow is fully developed both hydrodynamically and thermally, determine the required length of the tube. Note: by calculating Reynolds number at the entrance...
4. (25 pts) Water is flowing inside a thin wall, smooth pipe of diameter 0.05 m...
4. (25 pts) Water is flowing inside a thin wall, smooth pipe of diameter 0.05 m at a mass flowrate of 0.3 kg/s. The water enters the pipe at a mean temperature Tm,i= 80 °C and exits at Tm,o= 80 °C while the pipe surface temperature is maintained at Ts= 20 °C along its entire length. a. Is the flow turbulent or laminar? b. Calculate the average convection heat transfer coefficient inside the tube. c. Calculate the length of the...
rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, and its length is...
rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, and its length is 6 m. Let the water inlet temperature vary from 5'C to 25"'C. Identify the graph that depicts the overall heat transfer coefficient as a function of the inlet temperature A thin walled double pipe counter flow heat exchanger is to be used to cool oil (c,-2200 J/kgK) from 150°C to 40°C at a rate of 2 kg/s by water (cp = 4180 J/kgK) that...
8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-...
part b only please8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-long tube whose surface is at T, 25°C. 0.001 kg/s, enters (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is...
PROBLEM #3 (30 points) A shell-and (N 20) is used to heat vegetable oil on the shell side using hot water on tethat side. is Lp- 3.0 m). Each copper tube has dimensions of 15.56-mm ID and 19.05-...
PROBLEM #3 (30 points) A shell-and (N 20) is used to heat vegetable oil on the shell side using hot water on tethat side. is Lp- 3.0 m). Each copper tube has dimensions of 15.56-mm ID and 19.05-mm OD and thermal conductivity of copper is 390 W/m-K. Water at a total flow rate of 3.33 kg/s enters the tubes of the heat exchanger at 360 K and leaves at 300 K The inlet and outlet temperatures of oil are 290...
A concentric tube heat exchanger for cooling lubricating oil
consists of a thin-walled inner tube of 25 mm diameter carrying
water and an outer tube of 45 mm diameter carrying the oil. The
exchanger operates in countercurrent flow with an overall heat
transfer coefficient of 55 W/m2 K and the tabulated average
properties given below. Mass flow rates of oil and water are both
0.1 kg/s, oil enters the exchanger at 100°C, and water enters the
exchanger at 30°C. (a)...
(40 points) Engine oil flows at a rate of 1 kg/s through a 5-mm diameter smooth straight tube. The oil has an inlet temperature of 47°C and it is desired to heat the oil to a mean temperature of 87°C at the exit of the tube. The surface of the tube is maintained at 150°C. Assuming the flow is fully developed both hydrodynamically and thermally, determine the required length of the tube. Note: by calculating Reynolds number at the entrance...
4. (25 pts) Water is flowing inside a thin wall, smooth pipe of diameter 0.05 m at a mass flowrate of 0.3 kg/s. The water enters the pipe at a mean temperature Tm,i= 80 °C and exits at Tm,o= 80 °C while the pipe surface temperature is maintained at Ts= 20 °C along its entire length. a. Is the flow turbulent or laminar? b. Calculate the average convection heat transfer coefficient inside the tube. c. Calculate the length of the...
rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, and its length is 6 m. Let the water inlet temperature vary from 5'C to 25"'C. Identify the graph that depicts the overall heat transfer coefficient as a function of the inlet temperature A thin walled double pipe counter flow heat exchanger is to be used to cool oil (c,-2200 J/kgK) from 150°C to 40°C at a rate of 2 kg/s by water (cp = 4180 J/kgK) that...
part b only please8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-long tube whose surface is at T, 25°C. 0.001 kg/s, enters (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is...
PROBLEM #3 (30 points) A shell-and (N 20) is used to heat vegetable oil on the shell side using hot water on tethat side. is Lp- 3.0 m). Each copper tube has dimensions of 15.56-mm ID and 19.05-mm OD and thermal conductivity of copper is 390 W/m-K. Water at a total flow rate of 3.33 kg/s enters the tubes of the heat exchanger at 360 K and leaves at 300 K The inlet and outlet temperatures of oil are 290...
Most questions answered within 3 hours.
-
Buying your in-laws a gift because it’s expected is
due to the ____________ motive of gift-giving....
asked 6 minutes ago -
Discuss the pros and cons of collaborative software such
as SameTime. Does it increase productivity? What...
asked 3 minutes ago -
A large cable company reports the following.
80% of its customers subscribe to its cable TV...
asked 5 minutes ago -
Calculate the expected value, the variance, and the standard
deviation of the given random variable X....
asked 49 minutes ago -
A hospital performs 100 surgeries per week. The probability that
complications after surgery occur is 10%....
asked 1 hour ago -
1 point) Given the significance level α=0.01 find the following:
(a) left-tailed z value z= (b)...
asked 47 minutes ago -
Assuming you are the head of the software development unit at
Cyber.Soft, explain and justify why...
asked 13 minutes ago -
Magnesium and nitrogen react in a combination reaction to
produce magnesium nitride. 3 Mg + N2...
asked 21 minutes ago -
Two electrons are initially at rest separated by a distance of
2nm. At time t=0, they...
asked 19 minutes ago -
A martial artist is practicing breaking 5 boards. He is able to
break aboard with probability...
asked 27 minutes ago -
The rate constant of a first-order reaction is 2.95 × 10−4 s−1
at 350.° C. If...
asked 30 minutes ago -
implement a class called PiggyBank that will be used to
represent a collection of coins. Functionality...
asked 21 minutes ago