Homework Answers
Add Answer to:
rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, and its length is...
A thin-walled double-pipe counter-flow heat exchanger is to be used to cool oil (cp-2200 /kg K)...
A thin-walled double-pipe counter-flow heat exchanger is to be used to cool oil (cp-2200 /kg K) from 150 C to 40°C at a rate of 2 kg/s by water (c 4180J/kg.K) that enters at 22°C at a rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, O and its length is 6 m. Let the water inlet temperature vary from 5°C to 25°C. Identify the graph that depicts the overall heat transfer coefficient as a function of...
Cold water (Cp = 4180 J/kg · °C) leading to a shower enters a thin-walled double-pipe...
Cold water (Cp = 4180 J/kg · °C) leading to a shower enters a thin-walled double-pipe counter-flow heat exchanger at 15°C at a rate of 0.25 kg/s and is heated to 45°C by hot water (Cp = 4190 J/kg · °C) that enters at 100°C at a rate of 3 kg/s. If the overall heat transfer coefficient is 950 W/m2 · °C. determine the rate of heat transfer and the heat transfer surface area of the heat exchanger using the...
A concentric tube heat exchanger for cooling lubricating oil consists of a thin-walled inner tube of...
A concentric tube heat exchanger for cooling lubricating oil
consists of a thin-walled inner tube of 25 mm diameter carrying
water and an outer tube of 45 mm diameter carrying the oil. The
exchanger operates in countercurrent flow with an overall heat
transfer coefficient of 55 W/m2 K and the tabulated average
properties given below. Mass flow rates of oil and water are both
0.1 kg/s, oil enters the exchanger at 100°C, and water enters the
exchanger at 30°C. (a)...
Part II - Show your work (19 Marks] 16 Cold water (Cp = 4180 J/kg. "C)...
Part II - Show your work (19 Marks] 16 Cold water (Cp = 4180 J/kg. "C) leading to a shower enters a thin-walled double-pipe counter flow heat exchanger at 15°C at a rate of 0.25 kg/s and is heated to 45°C by hot water (Cp = 4190 J/kg. "C) that enters at 100°C at a rate of 3 kg/s. If the overall heat transfer coefficient is 950 W/m2. C, determine the rate of heat transfer and the heat transfer surface...
2.- Hot oil (Cp = 2200 J/kg °C) is to be cooled by water (Cp =...
2.- Hot oil (Cp = 2200 J/kg °C) is to be cooled by water (Cp = 4180 J/kg °C) in a 2-shell-passes and 12-tube-passes heat exchanger. The tubes are thin-walled and are made of copper with a diameter of 1.8 cm. The length of each tube pass in the heat exchanger is 3 m. Water flows through the tubes at a total rate of 0.1 kg/s, and the oil through the shell at a rate of 0.2 kg/s. The water...
P11-104. Cold water (Cp = 4180 J/kg-K) leading to a shower enters a thin-walled double-pipe counterflow...
P11-104. Cold water (Cp = 4180 J/kg-K) leading to a shower enters a thin-walled double-pipe counterflow heat exchanger at 15°C at a rate of 0.25 kg/s and is heated to 45°C by hot water (cp=4190 J/kg K) that enters at 100°C at a rate of 3 kg/s. If the overall heat transfer coefficient is 950 W/m2.K, determine the rate of heat transfer and the heat surface area of the heat exchanger using the effectiveness-NTU method.
Can you please answer the following question 0. (CLO6 - 4 Marks) A counter-flow double-pipe heat...
Can
you please answer the following question
0. (CLO6 - 4 Marks) A counter-flow double-pipe heat exchanger is to heat water from 20°C to 80°C at mass flow rate of 1.5 kg's. The heating is to be accomplished by hot oil available at 150C at a mass flow rate of 2.5 kg/s. The inner tube is thin-walled and has a diameter of 1.5 cm with the length of 60 m. Fluid property: Fluid Type Mass flow rate, The Specific heat,...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K when operating at design and clean conditions. Hot fluid enters the tube side at 101°C and exits at 71°C, while cold fluid enters the shell side at 27°C and exits at 42°C. After a period of use, built-up scale in the heat exchanger gives a fouling factor of 0.0004 m2 K/W. The surface area is 93 m². Assume both hot and cold fluids have...
Problem 2: Heat exchanger (25 points) Cold water (op 4179 J/kg K) enters the tubes of a heat exchanger at 20 °C at a rate of 3 kgs. while hot oil (cp 2200 J/kg.K) enters the shell at 130 C at the sam...
Problem 2: Heat exchanger (25 points) Cold water (op 4179 J/kg K) enters the tubes of a heat exchanger at 20 °C at a rate of 3 kgs. while hot oil (cp 2200 J/kg.K) enters the shell at 130 C at the same mass flow rate and leaves at 60°C The heat exchanger consistsoftwo shells and 20 tubes, each executing four passes (two passes per shell). If the W/m2-K, assume the tube wall is very thin with convective heat transfer...
A thin-walled tube with the diameter of 0.1 m and the length of 2 m passes...
A thin-walled tube with the diameter of 0.1 m and the length of 2 m passes through a s at the temperature of To 700 K. If water at 280 K enters into the tube at the flow rate of 0.2 Kg/ Riotal Assume there is no radiation and solve this problem for the specials external fluid temperature, hwater 200W/m .K; cp 4000 J/kg. K: har 80 W/m2 .K. s, calculate the outlet temperature of the water after finding the...
A thin-walled double-pipe counter-flow heat exchanger is to be used to cool oil (cp-2200 /kg K) from 150 C to 40°C at a rate of 2 kg/s by water (c 4180J/kg.K) that enters at 22°C at a rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, O and its length is 6 m. Let the water inlet temperature vary from 5°C to 25°C. Identify the graph that depicts the overall heat transfer coefficient as a function of...
A concentric tube heat exchanger for cooling lubricating oil
consists of a thin-walled inner tube of 25 mm diameter carrying
water and an outer tube of 45 mm diameter carrying the oil. The
exchanger operates in countercurrent flow with an overall heat
transfer coefficient of 55 W/m2 K and the tabulated average
properties given below. Mass flow rates of oil and water are both
0.1 kg/s, oil enters the exchanger at 100°C, and water enters the
exchanger at 30°C. (a)...
Part II - Show your work (19 Marks] 16 Cold water (Cp = 4180 J/kg. "C) leading to a shower enters a thin-walled double-pipe counter flow heat exchanger at 15°C at a rate of 0.25 kg/s and is heated to 45°C by hot water (Cp = 4190 J/kg. "C) that enters at 100°C at a rate of 3 kg/s. If the overall heat transfer coefficient is 950 W/m2. C, determine the rate of heat transfer and the heat transfer surface...
2.- Hot oil (Cp = 2200 J/kg °C) is to be cooled by water (Cp = 4180 J/kg °C) in a 2-shell-passes and 12-tube-passes heat exchanger. The tubes are thin-walled and are made of copper with a diameter of 1.8 cm. The length of each tube pass in the heat exchanger is 3 m. Water flows through the tubes at a total rate of 0.1 kg/s, and the oil through the shell at a rate of 0.2 kg/s. The water...
P11-104. Cold water (Cp = 4180 J/kg-K) leading to a shower enters a thin-walled double-pipe counterflow heat exchanger at 15°C at a rate of 0.25 kg/s and is heated to 45°C by hot water (cp=4190 J/kg K) that enters at 100°C at a rate of 3 kg/s. If the overall heat transfer coefficient is 950 W/m2.K, determine the rate of heat transfer and the heat surface area of the heat exchanger using the effectiveness-NTU method.
Can
you please answer the following question
0. (CLO6 - 4 Marks) A counter-flow double-pipe heat exchanger is to heat water from 20°C to 80°C at mass flow rate of 1.5 kg's. The heating is to be accomplished by hot oil available at 150C at a mass flow rate of 2.5 kg/s. The inner tube is thin-walled and has a diameter of 1.5 cm with the length of 60 m. Fluid property: Fluid Type Mass flow rate, The Specific heat,...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K when operating at design and clean conditions. Hot fluid enters the tube side at 101°C and exits at 71°C, while cold fluid enters the shell side at 27°C and exits at 42°C. After a period of use, built-up scale in the heat exchanger gives a fouling factor of 0.0004 m2 K/W. The surface area is 93 m². Assume both hot and cold fluids have...
Problem 2: Heat exchanger (25 points) Cold water (op 4179 J/kg K) enters the tubes of a heat exchanger at 20 °C at a rate of 3 kgs. while hot oil (cp 2200 J/kg.K) enters the shell at 130 C at the same mass flow rate and leaves at 60°C The heat exchanger consistsoftwo shells and 20 tubes, each executing four passes (two passes per shell). If the W/m2-K, assume the tube wall is very thin with convective heat transfer...
A thin-walled tube with the diameter of 0.1 m and the length of 2 m passes through a s at the temperature of To 700 K. If water at 280 K enters into the tube at the flow rate of 0.2 Kg/ Riotal Assume there is no radiation and solve this problem for the specials external fluid temperature, hwater 200W/m .K; cp 4000 J/kg. K: har 80 W/m2 .K. s, calculate the outlet temperature of the water after finding the...
Most questions answered within 3 hours.
-
(Expected rate of return and risk) Carter Inc. is evaluating a
security. Calculate the investment’s expected...
asked 45 minutes ago -
What specific indicators can point to lack of progress for
African Americans in American society?
asked 1 hour ago -
1-The Electrons in a beam are moving at 2.7×108 m/s in an
electric field of 15000...
asked 2 hours ago -
A gas tank is a vertical cylinder. It has a radius of 1m, a
height of...
asked 2 hours ago -
Accent Software faces the following conditions. All of these
support Accent’s use of a market-penetration pricing...
asked 3 hours ago -
A mathematically inclined friend emails you the following
instructions: "Meet me in the cafeteria the first...
asked 3 hours ago -
A monopoly sells in two countries . The demand curves in the two
countries are p1...
asked 4 hours ago -
A .15kg rubber ball is bounced off a wall. Before hitting the
wall, the ball moves...
asked 5 hours ago -
A manufacturing company preparing to build a new plant is
considering three potential locations for it....
asked 5 hours ago -
B. If compound Y has approximately the same values of solubility
in toluene as compound X,...
asked 5 hours ago -
Oscar Inc. has inventory in Japan valued at 39,051,000 Yen one
year ago. One year ago...
asked 6 hours ago -
If Canada suffered from "fundamental disequilibrium," and its
government choose not to devalue its currency, a...
asked 6 hours ago