Homework Answers
Add Answer to:
1. You have a sheet of carbon steel with a thickness of 1 mm, a length...
Exercise 2 Air at 20 °C and 1 atm flows over a flat plate at 50...
Exercise 2 Air at 20 °C and 1 atm flows over a flat plate at 50 m/s. The plate is 300 cm long and is maintained at 60C. The width of the plate is 2 m. The critical Rec = 5 x 105 The properties are Conductivity k = 0.0263 W/mK, kinematic viscosity nu = v = 15.89 x 10-6 m²/s, Prandtl number is Pr=0.707 Density rho = p = 1.128 kg/m3 1. Determine the critical length Xc 2. Determine...
NE Steel tubes (k =35 W/m2.K) of 400-mm inner diameter and 30-mm wall thickness are used...
NE Steel tubes (k =35 W/m2.K) of 400-mm inner diameter and 30-mm wall thickness are used to route superheated steam from the boller to the turbine in a power plant. Safety and economic concerns make it practical to add a 200-mm layer of Insulation (k =0.1 W/mK) to each tube, which is wrapped in a thin sheet of aluminum with an emissivity e =0.15. The air (with a convective coefficient h =5 W/m2K) and wail temperatures of the plant are...
Problem 7.019 Steel (AISI 1010) plates of thickness δ 18 mm and length L-1 m on...
Problem 7.019 Steel (AISI 1010) plates of thickness δ 18 mm and length L-1 m on a side are conveyed from a heat treatment process and are concurrently cooled by atmospheric air of velocity u. 5 m/s and T.20°C in parallel flow over the plates. Conveyor For an initial plate temperature of Ti =300°C, what is the rate of heat transfer from the plate? what is the corresponding rate of change of the plate temperature? The velocity of the air...
Air at T=25°C and pressure P=1 bar flows over a square plate with a velocity V=1...
Air at T=25°C and pressure P=1 bar flows over a square plate with a velocity V=1 m/s. This plate has a length L= 1 m and it is heated over its entire length; the plate temperature is constant Tp=100°C. The following data are given. For air: dynamic viscosity: mu = 1.9*10–5 kg/(m.s); density: rho = 1.05 kg/m3; conductivity k = 0.03 W/(m K); Specific heat Cp = 1.007 kJ/(kg K); Prandtl number Pr = 0.7 For laminar flow over a...
4) Air at 101 kPa and 360 K flows at 15 m/s over a flat plate...
4) Air at 101 kPa and 360 K flows at 15 m/s over a flat plate maintained at 300 K Assume that the transition Reynolds number is 5x10 (0.332R 12Pr1/3 Re < 5 x 105 0.029Repr0:43 5 x 105 < Re <3 x 107 Assume that k-0.03 W/( mK), 20x10* m?ls, Pr-0.7.p=1.16 kg/m a) If the plate is 2 m long, sketch the local heat transfer coefficient over the plate. Specify the functional form of h with respect tox b)...
Heat Transfer Please be neat and organized for a thumbs up! Problem 3 Atmospheric air at...
Heat Transfer
Please be neat and organized for a thumbs up!
Problem 3 Atmospheric air at T 300 K and a free stream velocity of u 10 m/s flows over a flat plate L = 2 m long that is maintained at a uniform temperature T-320 K. (a) Calculate the average heat transfer coefficient over the region where the boundary layer is laminar. What is the boundary layer thickness at this location? plate as well as the velocity boundary layer...
7.24 Steel (AISI 1010) plates of thickness δ-6mm and length L 1 m on a side...
7.24 Steel (AISI 1010) plates of thickness δ-6mm and length L 1 m on a side are conveyed from a heat treatment process and are concurrently cooled by atmospheric air of velocity u e-10 m/s and To = 20°C in parallel flow over the plates Conveyor Ti Air T For an initial plate temperature of T 300°C, what is the rate of heat transfer from the plate? What is the cor- responding rate of change of the plate temperature? The...
Consider a single stack of rectangular fins of length L and thickness t, with convection conditions...
Consider a single stack of rectangular fins of length L and thickness t, with convection conditions corresponding to h and To. The bottom plate is well-insulated and an adiabatic fin tip condition may be assumed (a) Obtain the expression for the fin heat transfer rate (b) In a specific application, a stack that is 200 mm wide and 100 mm deep contains 50 fins, each of length L - 12 mm. The base and fins are made from aluminum (k...
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm...
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm is covered with an insulation material [k 0.2 W/(m. C)] of thickness 2 cm. A hot gas at 320°C with a heat transfer coefficient of 200 W/(m2.C) flows inside the tube. The outer surface of the insulation is exposed to cooler air at 20°C with a heat transfer coefficient of 50 W/(m2·°C). Calculate a) The heat loss from the tube to the air for...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 7...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 70 mm are attached to the wall with surface temperature o C. The fin is made of material with thermal conductivity of 210 W/mk, and exposed to an ambient air condition of 24 °C and the convection heat transfer coefficient of 190 W/m2k. f 300 1- Plot the temperature variation for the following boundary conditions a- Infinitely long fin b- Adiabatic fin tip c-...
Exercise 2 Air at 20 °C and 1 atm flows over a flat plate at 50 m/s. The plate is 300 cm long and is maintained at 60C. The width of the plate is 2 m. The critical Rec = 5 x 105 The properties are Conductivity k = 0.0263 W/mK, kinematic viscosity nu = v = 15.89 x 10-6 m²/s, Prandtl number is Pr=0.707 Density rho = p = 1.128 kg/m3 1. Determine the critical length Xc 2. Determine...
NE Steel tubes (k =35 W/m2.K) of 400-mm inner diameter and 30-mm wall thickness are used to route superheated steam from the boller to the turbine in a power plant. Safety and economic concerns make it practical to add a 200-mm layer of Insulation (k =0.1 W/mK) to each tube, which is wrapped in a thin sheet of aluminum with an emissivity e =0.15. The air (with a convective coefficient h =5 W/m2K) and wail temperatures of the plant are...
Problem 7.019 Steel (AISI 1010) plates of thickness δ 18 mm and length L-1 m on a side are conveyed from a heat treatment process and are concurrently cooled by atmospheric air of velocity u. 5 m/s and T.20°C in parallel flow over the plates. Conveyor For an initial plate temperature of Ti =300°C, what is the rate of heat transfer from the plate? what is the corresponding rate of change of the plate temperature? The velocity of the air...
4) Air at 101 kPa and 360 K flows at 15 m/s over a flat plate maintained at 300 K Assume that the transition Reynolds number is 5x10 (0.332R 12Pr1/3 Re < 5 x 105 0.029Repr0:43 5 x 105 < Re <3 x 107 Assume that k-0.03 W/( mK), 20x10* m?ls, Pr-0.7.p=1.16 kg/m a) If the plate is 2 m long, sketch the local heat transfer coefficient over the plate. Specify the functional form of h with respect tox b)...
Heat Transfer
Please be neat and organized for a thumbs up!
Problem 3 Atmospheric air at T 300 K and a free stream velocity of u 10 m/s flows over a flat plate L = 2 m long that is maintained at a uniform temperature T-320 K. (a) Calculate the average heat transfer coefficient over the region where the boundary layer is laminar. What is the boundary layer thickness at this location? plate as well as the velocity boundary layer...
7.24 Steel (AISI 1010) plates of thickness δ-6mm and length L 1 m on a side are conveyed from a heat treatment process and are concurrently cooled by atmospheric air of velocity u e-10 m/s and To = 20°C in parallel flow over the plates Conveyor Ti Air T For an initial plate temperature of T 300°C, what is the rate of heat transfer from the plate? What is the cor- responding rate of change of the plate temperature? The...
Consider a single stack of rectangular fins of length L and thickness t, with convection conditions corresponding to h and To. The bottom plate is well-insulated and an adiabatic fin tip condition may be assumed (a) Obtain the expression for the fin heat transfer rate (b) In a specific application, a stack that is 200 mm wide and 100 mm deep contains 50 fins, each of length L - 12 mm. The base and fins are made from aluminum (k...
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm is covered with an insulation material [k 0.2 W/(m. C)] of thickness 2 cm. A hot gas at 320°C with a heat transfer coefficient of 200 W/(m2.C) flows inside the tube. The outer surface of the insulation is exposed to cooler air at 20°C with a heat transfer coefficient of 50 W/(m2·°C). Calculate a) The heat loss from the tube to the air for...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 70 mm are attached to the wall with surface temperature o C. The fin is made of material with thermal conductivity of 210 W/mk, and exposed to an ambient air condition of 24 °C and the convection heat transfer coefficient of 190 W/m2k. f 300 1- Plot the temperature variation for the following boundary conditions a- Infinitely long fin b- Adiabatic fin tip c-...
Most questions answered within 3 hours.
-
There are many minerals which contain sliver. One of them,
smithite, is placed in water and...
asked 1 minute ago -
Two bankrobbers are standing side by side, trying to push open
the door of a safe...
asked 26 minutes ago -
The time married men with children spend on child care averages
5.9 hours per week (Time,...
asked 3 minutes ago -
2. You want to buy a house. You can make an initial payment of
$200,000 and...
asked 22 minutes ago -
Why study the ‘Economic environment’ of a country? Describe the
information you will be collecting in...
asked 13 minutes ago -
A chandelier with mass m is suspended from a cable with mass M
from the ceiling....
asked 23 minutes ago -
How many disk accesses are needed to bring byte i of a file
into memory when...
asked 26 minutes ago -
22.3 g of fructose, C6H12O6,
are dissolved completely in 75.5 mL of pure water at 20.0...
asked 25 minutes ago -
Compare/Contrast the Lac and Ara operons.
asked 42 minutes ago -
Part A
What is the maximum speed with which a 1200-kg car can round a
turn...
asked 44 minutes ago -
Write in c++ please
Read and write 5 students information such as, Student
ID, first name,...
asked 42 minutes ago -
T F 3. The existence of financial markets is required to have
interest rates in a...
asked 41 minutes ago