Question 1 In the epicyclic gear shown in Figure Q1 the Annulus A1 and the Sun...

Question

Question

Question 1 In the epicyclic gear shown in Figure Q1 the Annulus A1 and the Sun wheel S2 are compound, the Sun wheel Si rotate

Answer 1

Answer #1

SOLUTION:-

Add a comment

Answer 2

Similar Homework Help Questions

Answer given is 524 rpm Question 2 A compound epicydic gear is as shown in Figure...

Answer given is 524 rpm Question 2 A compound epicydic gear is as shown in Figure Q2. Sun wheels S1 and 52 are integral with the input shaft X and the Annulus wheel A1 is fixed. The Planet wheel P1 rotates about a pin carried by the Annulus Az and the Planet wheel P2 rotates about a pin attached to the arm keyed to the shaft Y. The numbers of teeth are : Si=30, Pu=20, P2=18, Sz=32. Find the speed...
Answer given is No=-143rpm (in opposite direction to A) A compound epicyclic gear is as shown...

Answer given is No=-143rpm (in opposite direction to A) A compound epicyclic gear is as shown in Figure 4.9. Ai and S2 form a compound wheel, which rotates freely on shaft O. The Planet wheels P1 and P2 rotate on pins fixed in arms attached to shaft O. and A2 have internal teeth: the others have external teeth, with the following numbers, tsi=40; tp1=30 ; tpz=20; ts2=50. If Si rotates at 500 rpm and wheel Az is fixed, find the...
1. In an epicyclic gear train, as shown in Figure, the wheel C is keyed to...

1. In an epicyclic gear train, as shown in Figure, the wheel C is keyed to the shaft B and wheel F is keyed to shaft A. The wheels D and E rotate together on a pin fixed to the arm G. The number of teeth on wheels C, D, E and F are 35, 65, 32 and 68 respectively. If the shaft A rotates at 60 rpm and the shaft B rotates at 28 rpm in the opposite direction,...

compound epicyclic gear train.

The Fig. shows the arrangement of wheels in a compound epicyclic gear train. The sun wheel S₂ is integral with the annular wheel A₁. The two arms are also integral with each other. The number of teeth on the wheels are as follows: S₁=24, A₁=96, S₂=30, A₂ = 90If the shaft P rotates at 1980 r.p.m., find the speed of the shaft Q, when A₂ is fixed At what speed does Q rotate, when A₂ instead of being fixed, rotates...
please show all work 4. Given an Epicyclic gearbox that has a fixed Sun gear “D",...

please show all work 4. Given an Epicyclic gearbox that has a fixed Sun gear “D", and the output gear “C” has 300 Teeth, Planet gears have 30 Teeth, the input is Arm “A”. Given that the input torque is 100 N.m., input speed of 1250 rpm and the efficiency of the gearbox is 70%. Calculate the number of teeth on the sun gear and the ratio of the gearbox. Also Calculate the Fixing Torque.
A compound epicyclic gear train is shown in the Figure. The shaft P is driven at...

A compound epicyclic gear train is shown in the Figure. The shaft P is driven at 2500 rpm in the clockwise direction by a motor of power rating 8 kW. The sun S2 is fixed. The number of teeth in the gears are S1, 34; S2, 21; A1, 86 and A2, 73. Determine The magnitude and direction of the angular velocity of the shaft Q and The torque required to fix the sun, S2 A, Q P S, 5,

A compound epicyclic gear train is shown in the Figure. The shaft P is driven a...

A compound epicyclic gear train is shown in the Figure. The shaft P is driven a 4000 rpm in the clockwise direction by a motor of power rating of 10W . The annulus A2 is fixed. The number of teeth in the gears are , S1,28; S2,21; A1,72 and A2,99 . Determine: The magnitude and direction of the angular velocity of the shaft Q The torque required to fix the annulus, A2 A, A₂ P, P2 P P. z S
2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral p...

2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral pitch. Gear A has 88 teeth and gear B has 100 teeth both internally and externally. The sun-wheel C which is keyed to shaft P has 44 teeth and the pinion E keyed to shaft R has 25. There are floating compound planet wheels F, G. The power input to shaft R is 8 kW at 1440 rev/min....
Part 1 A simple epicyclic gear has a sun gear with 10 teeth and a ring...

Part 1 A simple epicyclic gear has a sun gear with 10 teeth and a ring gear with 100 teeth. If the sun gear is held stationary, calculate the speed/gear ratio when the ring gear is the input and the planet carrier is the output? Part 2 Two parallel shafts which are 220mm apart are to be connected by a simple gear train, will all gear centres on the same line, using gears from a pool of six gears of...

please show all work 3. Given an Epicyclic gearbox that has a fixed outer gear “C”,...

please show all work 3. Given an Epicyclic gearbox that has a fixed outer gear “C”, with 400 Teeth, Planet gears have 40 Teeth, the input is Arm “A”, and the output is sun gear “D”. Given that the input torque is 40 N.m., input speed of 1200 rpm and the efficiency of the gearbox is 80%. Calculate the number of teeth on the sun gear and the ratio of the gearbox. Also Calculate the Fixing Torque.