Homework Answers
8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-...
part b only please8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-long tube whose surface is at T, 25°C. 0.001 kg/s, enters (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is...
View Policies Current Attempt in Progress - 125 Air at a temperature Tmi -20°C and p...
View Policies Current Attempt in Progress - 125 Air at a temperature Tmi -20°C and p - 1 atm enters a 25-mm diameter, 1.25 m tube with a mass flow rate of 6 x 10"W.A constant heat flux warms the air so that its exit mean temperature is Tm.o -50°C. Find the required heat flux and wall surface temperature at the outlet. Assume fully developed flow.
8.12 Dry, compressed air at Tm.i75°C, p-10 atm, with a mass flow rate of 0.001 kg/s,...
8.12 Dry, compressed air at Tm.i75°C, p-10 atm, with a mass flow rate of 0.001 kg/s, enters a 30-mm-diameter, 5-m-long tube whose surface is at Ts - 25°C. (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is h- 3.58 W/m2...
Problem 3: (35pts) Atmospheric air enters the heated section of a circular tube at a flow...
Problem 3: (35pts) Atmospheric air enters the heated section of a circular tube at a flow rate of 0.005 kg/s and a temperature of 30°C. The tube is of diameter D =60mm, and fully developed conditions with h = 30W/m2K exist over the entire length of L-4m. Take cp-1015 /kg.K 2 (a) (10pts) For the case of uniform surface heat flux at q"-1000W/m, determine the total heat transfer rate q and the mean temperature of the air leaving the tube...
Water at m = 0.025 kg/s and Zn,i = 20°C enters an annular region formed by an inner tube of diame...
Water at m = 0.025 kg/s and Zn,i = 20°C enters an annular region formed by an inner tube of diameter D, = 20 mm and an outer tube of diameter Do-80 mm. Saturated steam flows through the inner tube, maintaining its surface at uniform temperature of T,i 100°C, while the outer surface of the outer tube is well insulated. If fully developed conditions may be assumed throughout the annulus, how long must the system be to provide an outlet...
Water enters a 20-mm tube at 27°C with a flow rate of 450 kg/h. The rate...
Water enters a 20-mm tube at 27°C with a flow rate of 450 kg/h. The rate of heat transfer from the tube wall to the fluid is given as q5'(W/m) - a x, where the coefficient a is 20 W/m2 and x (m) is the axial distance from the tube entrance. (a) Beginning with a properly defined differential control volume in the tube, derive an expression for the temperature distribution T m(x) of the water. Use this expression to determine...
A 10-mm diameter tube has a maintained surface temperature of 180°C. Engine oil enters the tube...
A 10-mm diameter tube has a maintained surface temperature of 180°C. Engine oil enters the tube at 70°C at a flow rate of 1.3 kg/s and exits at 105°C. Find the length, in m, of the tube and well as the corresponding heat transfer rate, in W. Assume fully developed flow and use the Dittus-Boelter equation to calculate the average Nusselt number. q= W L= m
2. (10 points) A pharmaceutical fluid is sterilized by heating it from 25 to 75 °C...
2. (10 points) A pharmaceutical fluid is sterilized by heating it from 25 to 75 °C as it moves at 0.2 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter that is 10 m long. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the straight tube. The pharmaceutical fluid properties may be approximated as: p = 1000 kg/mº, cp = 4 kJ/kg-K, u = 2.102 kg/s-m, k = 1...
Water enters through a thick-walled tube having inner and outer diameters of 19 and 38 mm and 20 m long
Water enters through a thick-walled tube having inner and outer diameters of 19 and 38 mm and 20 m long The inlet temperature is Tmi=17℃ and outlet temperature is Tmo = 50°C. The outer surface of the tube is well Insulated, and electrical heating within the wall provides for a uniform generation rate of q = 8X105 W/m3. If the inner surface temperature of the tube Ts = 60 °C at the outlet what is the local convection heat transfer...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
part b only please8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-long tube whose surface is at T, 25°C. 0.001 kg/s, enters (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is...
View Policies Current Attempt in Progress - 125 Air at a temperature Tmi -20°C and p - 1 atm enters a 25-mm diameter, 1.25 m tube with a mass flow rate of 6 x 10"W.A constant heat flux warms the air so that its exit mean temperature is Tm.o -50°C. Find the required heat flux and wall surface temperature at the outlet. Assume fully developed flow.
8.12 Dry, compressed air at Tm.i75°C, p-10 atm, with a mass flow rate of 0.001 kg/s, enters a 30-mm-diameter, 5-m-long tube whose surface is at Ts - 25°C. (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is h- 3.58 W/m2...
Problem 3: (35pts) Atmospheric air enters the heated section of a circular tube at a flow rate of 0.005 kg/s and a temperature of 30°C. The tube is of diameter D =60mm, and fully developed conditions with h = 30W/m2K exist over the entire length of L-4m. Take cp-1015 /kg.K 2 (a) (10pts) For the case of uniform surface heat flux at q"-1000W/m, determine the total heat transfer rate q and the mean temperature of the air leaving the tube...
Water at m = 0.025 kg/s and Zn,i = 20°C enters an annular region formed by an inner tube of diameter D, = 20 mm and an outer tube of diameter Do-80 mm. Saturated steam flows through the inner tube, maintaining its surface at uniform temperature of T,i 100°C, while the outer surface of the outer tube is well insulated. If fully developed conditions may be assumed throughout the annulus, how long must the system be to provide an outlet...
Water enters a 20-mm tube at 27°C with a flow rate of 450 kg/h. The rate of heat transfer from the tube wall to the fluid is given as q5'(W/m) - a x, where the coefficient a is 20 W/m2 and x (m) is the axial distance from the tube entrance. (a) Beginning with a properly defined differential control volume in the tube, derive an expression for the temperature distribution T m(x) of the water. Use this expression to determine...
A 10-mm diameter tube has a maintained surface temperature of 180°C. Engine oil enters the tube at 70°C at a flow rate of 1.3 kg/s and exits at 105°C. Find the length, in m, of the tube and well as the corresponding heat transfer rate, in W. Assume fully developed flow and use the Dittus-Boelter equation to calculate the average Nusselt number. q= W L= m
2. (10 points) A pharmaceutical fluid is sterilized by heating it from 25 to 75 °C as it moves at 0.2 m/s through a straight thin-walled stainless steel tube of 12.7-mm diameter that is 10 m long. A uniform heat flux is maintained by an electric resistance heater wrapped around the outer surface of the straight tube. The pharmaceutical fluid properties may be approximated as: p = 1000 kg/mº, cp = 4 kJ/kg-K, u = 2.102 kg/s-m, k = 1...
Homework 7 heat transfer 2018-20 1) A horizontal tube of 12.5-mm dimeter with an outer srface temperature of 240°C is placed in a room with an air temperature of 20°C. Estimate the heat transfer rate per unit length of the tube due to free convection. 2) Air at -10°C flows at 10 m/s over the roof plate of two 5m length rooms whose air is at Too-200C. The roof plate is 0.20-m thick concrete (k = 0.6 w/ m. K)....
Most questions answered within 3 hours.
-
Dopamine Hydrochloride: draw the structure And Show the
functional groups in different colors and label the...
asked 4 minutes ago -
A rope supports a 10 kg dumbbell hanging from it. What is the
tension in the...
asked 3 minutes ago -
Suppose that you know that in the population of full-time
employees in the United States, the...
asked 11 minutes ago -
This experiment was designed originally to sample various meat and carcass quality
aspects of Ontario pigs...
asked 12 minutes ago -
) Raw materials are studied for contamination. Suppose that
the number of particles of contamination per...
asked 26 minutes ago -
After running a regression analysis we calculated an F test and
the significance level was 0.15....
asked 22 minutes ago -
----Can someone please help me solve this one using JAVA
----I thank you in advance
Create...
asked 26 minutes ago -
1. What force primarily attracts the potassium ion to
the nitrate ion?
a. London forces...
asked 28 minutes ago -
What are the negative effects of abruptly stopping the use of
all fossil fuels? Give at...
asked 35 minutes ago -
Given that many conflict are the result of different parties having
different interests, is it possible...
asked 40 minutes ago -
A 750 g block can slide uniformly along the horizontal track
when a string attached to...
asked 43 minutes ago -
In 2017, Juan entered into a contract to write a book. The
publisher advanced Juan $50,000,...
asked 56 minutes ago