10. Problem 12.38 from the textbook (Statement: In a chemical processing plant a liquid is pumped...
please solve it step by step with details thank you!!!!! Water is to be pumped from one large, open tank to a second large open tank as shown in Figure 1. The pipe diameter throughout is 15 cm and the total length of the pipe between the pipe entrance and exit is 60 m. Minor loss coefficient for the entrance, exit and the elbow are shown, and the Darcy friction factor for the pipe can be assumed constant and equal...
A liquid chemical is pumped from a storage tank open to the atmosphere, into a reactor with pressure of 2.0 atm gauge above the liquid level. The liquid density is 1200 kg/m3 and viscosity is 1.45 cP. The required volumetric flow rate is 1.25 x 103 m/s. The pipeline is 100 m long in total, made of commercial steel pipe, 2 in. size and Schedule 40. The gate valve is wide open. 10 m Reactor Calculate: (a) The discharge velocity...
The industrial coolant with density of 900 kg/m' is to be pumped from large open processing tank to a large open storage tank. The pipe diameter throughout the length of the pipe is 0.153 m and the total length of the pipe between the pipe entrance and pipe exit is 200 m. The Minor loss coefficients for the entrance and exit effects are 1 and 1.5. The experimental values of minor loss coefficients due to the elbows are calculated as...
Question 3: Water is to be pumped from one large, open tank to a second large, open tank. The water surface of the first tank is 5 ft lower than the water surface of the second tank. The pipe diameter throughout is 4in. The total length of pipe is 300ft. The friction coefficient is 0.02. The pump with the performance curve given in the figure is suggested by the engineer. With this pump, what would be the flow rate between...
2 The industrial coolant with density of 900 kg/m' is to be pumped from large open processing tank to a large open storage tank. The pipe diameter throughout the length of the pipe is 0.153 m and the total length of the pipe between the pipe entrance and pipe exit is 200 m. The Minor loss coefficients for the entrance and exit effects are 1 and 1.5. The experimental values of minor loss coefficients due to the elbows are calculated...
Oil (density = 910Kg/m3 and viscosity 3.1 x10-3 Pa-s) is pumped from an open tank to a pressurized tank held at 400KPa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe (inside diameter 0.8m) at a rate of 5x10-3 m3/s. The length of the straight pipe is 150 m, and the pipe contains 4 (90-degree) elbows and two globe valve half open. The level of the liquid...
Task 1: You were asked to check up the status of the water system. Water at 24 °C is to be pumped from a Lower reservoir with 100 m elevation to another reservoir at a higher elevation 112 m through 150-m-long pipe as shown in Figure (1). The pipe is made of steel, and the diameter of the pipe is equal to 30 cm. Water is to be pumped by a 72% efficient motor-pump combination that draws 33 A of...
Two large tanks are open to the atmosphere at the top. Water s pumped from the lower tank to the upper tank through a single PVC (smooth) pipe. The relationship between Velocity in the pipe (ft/s) and the pump head (ft) is given. There are no significant minor losses. What is the flow rate, Q (cfs), in the pipe? Pump Coefficients 1.30 sec /ft Pipe Length Inside Pipe Diameter 300 ft 0.250 feet a = 3.24 sec b 107.00 ft...
Pipe Diameter (cm) D 10 d 5 Pipe Length (m) L1 6.57 L2 3.34 8.93 4.47 Ls 5.78 L 5.26 Lr 6.02 h = 18 m H = 20 m Note: all fittings are Threaded L. Ball Valve (closed) L1.D 45 Globe Valve (open) H) = 11.5 m 45% Ls, Led L7, D The two water tanks are connected with a pipe system made of galvanized iron. Water flows from the higher tank to the lower tank. The tanks have...
you can skip task 1 (3) because its a code in matlab. Task 1: You were asked to check up the status of the water system. Water at 24 °C is to be pumped from a Lower reservoir with 100 m elevation to another reservoir at a higher elevation 112 m through 150-m-long pipe as shown in Figure (1). The pipe is made of steel, and the diameter ofthe pipe is equal to 30 cm water is to be pumped...