Homework Answers
Add Answer to:
A liquid chemical is pumped from a storage tank open to the atmosphere, into a reactor...
Oil (density = 910Kg/m3 and viscosity 3.1 x10-3 Pa-s) is pumped from an open tank to...
Oil (density = 910Kg/m3 and viscosity 3.1 x10-3 Pa-s) is pumped from an open tank to a pressurized tank held at 400KPa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe (inside diameter 0.8m) at a rate of 5x10-3 m3/s. The length of the straight pipe is 150 m, and the pipe contains 4 (90-degree) elbows and two globe valve half open. The level of the liquid...
8-C) As shown below water is pumped and sprayed through a nozzle into the atmosphere at 20 m/s at...
8-C) As shown below water is pumped and sprayed through a nozzle into the atmosphere at 20 m/s at an elevation 10 m above the reservoir surface. The mass flow rate is 40 kg/s and the volumetric flow rate is 0.040 m3/s. The large diameter inlet pipe total length is 50 m. The pump effidency is 65%. The longer smaller diameter pipe leaving the pump is 200 m in total length. The pipes have different diameters as indicated below. The...
10. Problem 12.38 from the textbook (Statement: In a chemical processing plant a liquid is pumped...
10. Problem 12.38 from the textbook (Statement: In a chemical processing plant a liquid is pumped from an open tank, through a 0.1-m-diameter vertical pipe, and into another open tank as shown in the figure (a). A valve is located in the pipe, and the minor loss coefficient for the valve as a function of the valve setting is shown in figure (b). The pump head capacity relationship is given by the equation ha =52.0-1.01x10?Q? with ha in meters when...
The industrial coolant with density of 900 kg/m' is to be pumped from large open processing...
The industrial coolant with density of 900 kg/m' is to be pumped from large open processing tank to a large open storage tank. The pipe diameter throughout the length of the pipe is 0.153 m and the total length of the pipe between the pipe entrance and pipe exit is 200 m. The Minor loss coefficients for the entrance and exit effects are 1 and 1.5. The experimental values of minor loss coefficients due to the elbows are calculated as...
2 The industrial coolant with density of 900 kg/m' is to be pumped from large open...
2 The industrial coolant with density of 900 kg/m' is to be pumped from large open processing tank to a large open storage tank. The pipe diameter throughout the length of the pipe is 0.153 m and the total length of the pipe between the pipe entrance and pipe exit is 200 m. The Minor loss coefficients for the entrance and exit effects are 1 and 1.5. The experimental values of minor loss coefficients due to the elbows are calculated...
Q4: The pump is used to deliver of water from a river to a storage reservoir....
Q4: The pump is used to deliver of water from a river to a storage reservoir. The four pipes are connected in series of Inverse L shape which means the first pipe in vertical direction and others in horizontal direction. The first pipe in vertical position of 500m length of 150 mm diameter cast iron pipe, the second pipe is bend at 90' with a radius of 0.75m, the third pipe in horizontal direction of 100m length of 160mm diameter...
2. An oil having density of 833 kg/m3 and a viscosity of 3.3 x 103 Pa.s...
2. An oil having density of 833 kg/m3 and a viscosity of 3.3 x 103 Pa.s is pumped from an open tank to a pressurized tank held at 345 k Pa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe having an inside diameter of 0.07792 m at the rate of 3.494 x 103 m'/s. The length of the straight pipe is 122 m and the pipe...
1 A liquid with a specific gravity of 1.26 is being pumped from A to B...
1 A liquid with a specific gravity of 1.26 is being pumped from A to B through the pipeline of Fig. 55.8. At A the pipe diameter is 24 in (600 mm) and the pressure is 45 psi (300 kPa). At B the pipe diameter is 12 in (300 mm) and the pressure is 50 psi (330| kPa). Point B is 3 ft (1.0 m) lower than A. Find the flow rate if the pump puts 22 hp (16 kW)...
A pump move warm water at 120F from a reservoir open to atmosphere. The pipe is...
A pump move warm water at 120F from a reservoir open to atmosphere. The pipe is 6" diameter cast and has a standard 90 degree elbow and a fully open gate valve. The pump draws water from a pipe submerged below the water surface. The pump is 10 feet above the reservoir surface, and there are 20 feet of pipe in the inlet section. If the flow rate is 1,650 gpm, what is the NPSHA at the pump inlet?
Two large tanks are open to the atmosphere at the top. Water s pumped from the lower tank to the upper tank through a si...
Two large tanks are open to the atmosphere at the top. Water s
pumped from the lower tank to the upper tank through a single PVC
(smooth) pipe. The relationship between Velocity in the pipe (ft/s)
and the pump head (ft) is given. There are no significant minor
losses. What is the flow rate, Q (cfs), in the pipe?
Pump Coefficients 1.30 sec /ft Pipe Length Inside Pipe Diameter 300 ft 0.250 feet a = 3.24 sec b 107.00 ft...
8-C) As shown below water is pumped and sprayed through a nozzle into the atmosphere at 20 m/s at an elevation 10 m above the reservoir surface. The mass flow rate is 40 kg/s and the volumetric flow rate is 0.040 m3/s. The large diameter inlet pipe total length is 50 m. The pump effidency is 65%. The longer smaller diameter pipe leaving the pump is 200 m in total length. The pipes have different diameters as indicated below. The...
10. Problem 12.38 from the textbook (Statement: In a chemical processing plant a liquid is pumped from an open tank, through a 0.1-m-diameter vertical pipe, and into another open tank as shown in the figure (a). A valve is located in the pipe, and the minor loss coefficient for the valve as a function of the valve setting is shown in figure (b). The pump head capacity relationship is given by the equation ha =52.0-1.01x10?Q? with ha in meters when...
The industrial coolant with density of 900 kg/m' is to be pumped from large open processing tank to a large open storage tank. The pipe diameter throughout the length of the pipe is 0.153 m and the total length of the pipe between the pipe entrance and pipe exit is 200 m. The Minor loss coefficients for the entrance and exit effects are 1 and 1.5. The experimental values of minor loss coefficients due to the elbows are calculated as...
2 The industrial coolant with density of 900 kg/m' is to be pumped from large open processing tank to a large open storage tank. The pipe diameter throughout the length of the pipe is 0.153 m and the total length of the pipe between the pipe entrance and pipe exit is 200 m. The Minor loss coefficients for the entrance and exit effects are 1 and 1.5. The experimental values of minor loss coefficients due to the elbows are calculated...
Q4: The pump is used to deliver of water from a river to a storage reservoir. The four pipes are connected in series of Inverse L shape which means the first pipe in vertical direction and others in horizontal direction. The first pipe in vertical position of 500m length of 150 mm diameter cast iron pipe, the second pipe is bend at 90' with a radius of 0.75m, the third pipe in horizontal direction of 100m length of 160mm diameter...
2. An oil having density of 833 kg/m3 and a viscosity of 3.3 x 103 Pa.s is pumped from an open tank to a pressurized tank held at 345 k Pa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe having an inside diameter of 0.07792 m at the rate of 3.494 x 103 m'/s. The length of the straight pipe is 122 m and the pipe...
1 A liquid with a specific gravity of 1.26 is being pumped from A to B through the pipeline of Fig. 55.8. At A the pipe diameter is 24 in (600 mm) and the pressure is 45 psi (300 kPa). At B the pipe diameter is 12 in (300 mm) and the pressure is 50 psi (330| kPa). Point B is 3 ft (1.0 m) lower than A. Find the flow rate if the pump puts 22 hp (16 kW)...
Two large tanks are open to the atmosphere at the top. Water s
pumped from the lower tank to the upper tank through a single PVC
(smooth) pipe. The relationship between Velocity in the pipe (ft/s)
and the pump head (ft) is given. There are no significant minor
losses. What is the flow rate, Q (cfs), in the pipe?
Pump Coefficients 1.30 sec /ft Pipe Length Inside Pipe Diameter 300 ft 0.250 feet a = 3.24 sec b 107.00 ft...
Most questions answered within 3 hours.
-
From the literature (reference your sources): What are the
lattice parameters of calcite and aragonite? Why...
asked 38 minutes ago -
Your system is rejecting the question am asking which is
preceded by a case study. It...
asked 42 minutes ago -
3. On January 2, 2000, Larry creates a trust with himself as
trustee. Larry as trustee...
asked 39 minutes ago -
A member of the volleyball team spikes the ball. During this
process, she changes the velocity...
asked 46 minutes ago -
Are adult gamers less likely to use a gaming console (Xbox,
PlayStation, Wii, etc...) than teen...
asked 1 hour ago -
The University of
Texas recently reported that 43% of college students aged 18-24
would spend their...
asked 1 hour ago -
The length of stay at a specific emergency department in
Phoenix, Arizona, in 2009 had a...
asked 1 hour ago -
. Please give the mechanism for this type of problem. Step by
Step
The toxin that...
asked 1 hour ago -
If you have a 1M stock solution and you want to dilute 1 :10
with water,...
asked 1 hour ago -
In a load instruction, the effective address is obtained by
A) Retriving the address from a...
asked 1 hour ago -
Use the following information to answer this question.
Windswept, Inc. 2017 Income Statement ($ in millions)...
asked 1 hour ago -
A mutual fund salesperson has arranged to call on four people
tomorrow. Based on past experience...
asked 1 hour ago