In a gear set consists of 15-tooth pinion driving a 40-tooth gear. The diametral pitch is...
A. The tooth thickness for the gear and for the pinion.
B. If the pinion is rotating with an angular velocity of 700 rpm and a torque of 800 lbf.in. is being applied on the shaft of the pinion then calculate the following
The power generated by the output shaft of the driven gear (Efficiency-100%).
The total force applied on the gear tooth, when the gears are meshed.
Homework Answers
Add Answer to:
In a gear set consists of 15-tooth pinion driving a 40-tooth gear. The diametral pitch is...
A gear-set consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch (P) is...
A gear-set consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch (P) is 2, and the addendum and dedendum are 1/P and 1.25/P respectively. The gears are cut using a pressure angle of 20°. Compute the circular pitch, the center distance and the radii of the base circles. In mounting the gears, the center distance was incorrectly made ¼ in longer. Compute the new values of pressure angle and the pitch circle diameters. (Ans. 1.57 in, 14...
The figure shows a 16-tooth, 32 pitch straight bevel pinion driving a 24-tooth, 32 pitch gear....
The figure shows a 16-tooth, 32 pitch straight bevel pinion
driving a 24-tooth, 32 pitch gear. Both (pinion and gear) have a
pitch diameter of 0.75 inch and a radius of 0.40 inch. The pinion
is conected to a 1,621 rpm Gear Motor (motor torque= 97.2 oz-in).
The 303 stainless steel gear shaft has a diameter of 0.25 inch, a
length of 3 inch, and rotates about its axis-y at 1080 rpm (113
rad/sec). The wheel mounted on the gear...
A gearset consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch is 2,...
A gearset consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch is 2, and the addendum and dedendum are 1/P and 1.25/P, respectively. The gears are cut using a pressure angle of 20° (a) Compute the circular pitch, the center distance, and the radii of the base circles. (b) In mounting these gears, the center distance was incorrectly made in larger. Compute the new values of the pressure angle and the pitch-circle diameters. 1- [a] For positive...
15 - A parallel-shaft gearset consists of an 18-tooth helical pinion driving a 32-tooth gear. The...
15 - A parallel-shaft gearset consists of an 18-tooth helical pinion driving a 32-tooth gear. The pinion has a left-hand helix angle of 20, a normal pressure angle of 25, and a normal module of 3 mm. Evaluate normal circular pitch (mm) A) 2.77 B) 9,425 C) 6.26 D) 0.955 E) 3
A 3-hp motor drives an 18-tooth pinion at 900 rpm that is mated to a 78-tooth...
A 3-hp motor drives an 18-tooth pinion at 900 rpm that is mated to a 78-tooth gear. The gears both have a diametral pitch of 6 TPI a) What is the pitch-line velocity, V, in ft/min? b) What is the force transmitted, W, between the gears, in Ib? e) What is the torque, T, on the pinion, in in- Ibe d) What is the pinion speed, ap, in radians per second? e) What is the gear speed, ng, in rpm...
3. 32 An 8 diametral pitch, 18 tooth pinion rotates at 1200 rpm counter, clockwise, It...
3. 32 An 8 diametral pitch, 18 tooth pinion rotates at 1200 rpm counter, clockwise, It meshes with a gear with a pitch diameter of bin. Determine the rebcity of the driven gear.
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/i...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/in. The gears are grade t steel, through-hardened at 200 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and ngid mounted Assume a lion life ofi will transmitareliability of90%(KR 0.85), and use YN 1.355N 01:8 and Z 1. used...
A gear train of a 28 tooth pinion and a 60 tooth spur gear is designed...
A gear train of a 28 tooth pinion and a 60 tooth spur gear is designed to operate with the following: a 25 degree pressure angle, full-depth involute teeth, and a diametral pitch of 16 teeth/in. The standard center distance is increased by 0.125 inches. At what pressure angle do the gears operate now?
The figure shows a pair of shaft-mounted spur gears having a diametral pitch of 5 teeth/in with a...
The figure shows a pair of shaft-mounted spur gears having a diametral pitch of 5 teeth/in with an 18-tooth 20° pinion driving a 50-tooth gear. The horsepower input is 31 maximum at 1.600 rev/min. Find the magnitude of the maximum forces acting on bearings A,B, C, and D 3 in 3 in RA RB = lbf lbf lbf lbf RD =
The figure shows a pair of shaft-mounted spur gears having a diametral pitch of 5 teeth/in with an 18-tooth...
For a pair of spur gears with a diametral pitch of 12, and a 20° degree...
For a pair of spur gears with a diametral pitch of 12, and a 20° degree pressure angle and with the number of teeth on the pinion 11 and the number of teeth on the gear 18, compute all the features of the gear teeth described below: (a) Pitch diameter for the gear, (b) Pitch diameter for the pinion (c) The circular pitch, (d) Addendum, (e) Dedendum, (f) Clearance, (g) Whole depth, (h) The tooth thickness (hint: based on circular...
The figure shows a 16-tooth, 32 pitch straight bevel pinion
driving a 24-tooth, 32 pitch gear. Both (pinion and gear) have a
pitch diameter of 0.75 inch and a radius of 0.40 inch. The pinion
is conected to a 1,621 rpm Gear Motor (motor torque= 97.2 oz-in).
The 303 stainless steel gear shaft has a diameter of 0.25 inch, a
length of 3 inch, and rotates about its axis-y at 1080 rpm (113
rad/sec). The wheel mounted on the gear...
A gearset consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch is 2, and the addendum and dedendum are 1/P and 1.25/P, respectively. The gears are cut using a pressure angle of 20° (a) Compute the circular pitch, the center distance, and the radii of the base circles. (b) In mounting these gears, the center distance was incorrectly made in larger. Compute the new values of the pressure angle and the pitch-circle diameters. 1- [a] For positive...
15 - A parallel-shaft gearset consists of an 18-tooth helical pinion driving a 32-tooth gear. The pinion has a left-hand helix angle of 20, a normal pressure angle of 25, and a normal module of 3 mm. Evaluate normal circular pitch (mm) A) 2.77 B) 9,425 C) 6.26 D) 0.955 E) 3
A 3-hp motor drives an 18-tooth pinion at 900 rpm that is mated to a 78-tooth gear. The gears both have a diametral pitch of 6 TPI a) What is the pitch-line velocity, V, in ft/min? b) What is the force transmitted, W, between the gears, in Ib? e) What is the torque, T, on the pinion, in in- Ibe d) What is the pinion speed, ap, in radians per second? e) What is the gear speed, ng, in rpm...
3. 32 An 8 diametral pitch, 18 tooth pinion rotates at 1200 rpm counter, clockwise, It meshes with a gear with a pitch diameter of bin. Determine the rebcity of the driven gear.
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/in. The gears are grade t steel, through-hardened at 200 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and ngid mounted Assume a lion life ofi will transmitareliability of90%(KR 0.85), and use YN 1.355N 01:8 and Z 1. used...
The figure shows a pair of shaft-mounted spur gears having a diametral pitch of 5 teeth/in with an 18-tooth 20° pinion driving a 50-tooth gear. The horsepower input is 31 maximum at 1.600 rev/min. Find the magnitude of the maximum forces acting on bearings A,B, C, and D 3 in 3 in RA RB = lbf lbf lbf lbf RD =
The figure shows a pair of shaft-mounted spur gears having a diametral pitch of 5 teeth/in with an 18-tooth...
For a pair of spur gears with a diametral pitch of 12, and a 20° degree pressure angle and with the number of teeth on the pinion 11 and the number of teeth on the gear 18, compute all the features of the gear teeth described below: (a) Pitch diameter for the gear, (b) Pitch diameter for the pinion (c) The circular pitch, (d) Addendum, (e) Dedendum, (f) Clearance, (g) Whole depth, (h) The tooth thickness (hint: based on circular...
Most questions answered within 3 hours.
-
A smoke detector system uses two devices, A and B. If smoke is
present, the probability...
asked 45 minutes ago -
Your division head has assigned another important project to you
and your team. This project is...
asked 10 minutes ago -
Under normal use conditions, the Mean Time To Failure of a
heating coil can be modeled...
asked 1 hour ago -
Consider the probability that fewer than 34 out of 116 CDs will
be defective. Assume the...
asked 25 minutes ago -
4J Manufacturing Company uses a job order cost accounting system
and keeps perpetual inventory records. Prepare...
asked 14 minutes ago -
Please write code in C++
using recursive function
Write a program that computes the sequence of...
asked 12 minutes ago -
What is 345 as an unsigned decimal number? It is 34
with subscript of 5. Not...
asked 28 minutes ago -
I've been struggling with these homework questions. Any help
would be greatly appreciated
1. For the...
asked 26 minutes ago -
Read the In-Depth Integrative Case 1.2 (Pharmaceutical
Companies, Intellectual Property, and the Global AIDS Epidemic) in...
asked 26 minutes ago -
Consider a mass-spring system. The spring has a spring constant
of 2.27e+3 N/m. On the end...
asked 31 minutes ago -
People are most likely to believe their ancestors play an active
role in their lives in...
asked 1 hour ago -
A student holds a ruler by one end (x=0 where the student holds
it). The student...
asked 1 hour ago