The figure shows a 16-tooth, 32 pitch straight bevel pinion driving a 24-tooth, 32 pitch gear. Both (pinion and gear) have a pitch diameter of 0.75 inch and a radius of 0.40 inch. The pinion is conected to a 1,621 rpm Gear Motor (motor torque= 97.2 oz-in). The 303 stainless steel gear shaft has a diameter of 0.25 inch, a length of 3 inch, and rotates about its axis-y at 1080 rpm (113 rad/sec). The wheel mounted on the gear shaft has a diameter of 4 in.
Find the angular velocity and linear velocity of the wheel. State your answer in rad/sec, rpm, mph as appropriately.
Homework Answers
Add Answer to:
The figure shows a 16-tooth, 32 pitch straight bevel pinion
driving a 24-tooth, 32 pitch gear....
In a gear set consists of 15-tooth pinion driving a 40-tooth gear. The diametral pitch is...
In a gear set consists of 15-tooth pinion driving a 40-tooth gear. The diametral pitch is 2. The pressure angle is 25° calculate the following A. The tooth thickness for the gear and for the pinion. B. If the pinion is rotating with an angular velocity of 700 rpm and a torque of 800 lbf.in. is being applied on the shaft of the pinion then calculate the following The power generated by the output shaft of the driven gear (Efficiency-100%)....
A 20° straight-tooth bevel pinion having 16 teeth and a module of 2 mm/teeth. The bevel...
A 20° straight-tooth bevel pinion having 16 teeth and a module of 2 mm/teeth. The bevel gear The two shafts are perpendicular and in the same plane. Find: (a) The cone distance (b) The pitch angles (c) The pitch diameters (d) The face width ear has 32 teeth.
3. 32 An 8 diametral pitch, 18 tooth pinion rotates at 1200 rpm counter, clockwise, It...
3. 32 An 8 diametral pitch, 18 tooth pinion rotates at 1200 rpm counter, clockwise, It meshes with a gear with a pitch diameter of bin. Determine the rebcity of the driven gear.
A pair of straight bevel gears are mounted on shafts that are 90 degrees apart, and pinion transmits 10 hp at 300 rpm. The pinion has 6" outside pitch diameter, 2" face width, 20 teeth and Φ =...
A pair of straight bevel gears are mounted on shafts that are 90 degrees apart, and pinion transmits 10 hp at 300 rpm. The pinion has 6" outside pitch diameter, 2" face width, 20 teeth and Φ = 20˚. For a velocity ratio of 0.5, draw a free body diagram of gears showing all forces. What is torque produced about gear axis? The average pinion pitch diameter is 5.104"
15 - A parallel-shaft gearset consists of an 18-tooth helical pinion driving a 32-tooth gear. The...
15 - A parallel-shaft gearset consists of an 18-tooth helical pinion driving a 32-tooth gear. The pinion has a left-hand helix angle of 20, a normal pressure angle of 25, and a normal module of 3 mm. Evaluate normal circular pitch (mm) A) 2.77 B) 9,425 C) 6.26 D) 0.955 E) 3
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is 2 in. The pinion rotates at 1000 rev/min and transmits 50 hp. The shafts are...
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is 2 in. The pinion rotates at 1000 rev/min and transmits 50 hp. The shafts are at 90. Determine the components of the gear tooth force and show these on a sketch of the ge
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is...
Question is in Metric not imperial MEA35TA/101/0/2019 Question 9 An uncrowned straight-bevel pinion has 30 teeth, a diametral pitch of 6, and a transmission accuracy number of 6. The driven gear h...
Question is in Metric not imperial
MEA35TA/101/0/2019 Question 9 An uncrowned straight-bevel pinion has 30 teeth, a diametral pitch of 6, and a transmission accuracy number of 6. The driven gear has 60 teeth. Both are made of No. 30 cast iron. The shaft angle is 90 . The face width is 1.25 in, the pinion speed is 900 rev/min, and the normal pressure angle is 20.. The pinion is mounted outboard of its bearings: the bearings of the gear...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/i...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/in. The gears are grade t steel, through-hardened at 200 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and ngid mounted Assume a lion life ofi will transmitareliability of90%(KR 0.85), and use YN 1.355N 01:8 and Z 1. used...
0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shaft...
Desgin
0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
Desgin 0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate...
Desgin
0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
A 20° straight-tooth bevel pinion having 16 teeth and a module of 2 mm/teeth. The bevel gear The two shafts are perpendicular and in the same plane. Find: (a) The cone distance (b) The pitch angles (c) The pitch diameters (d) The face width ear has 32 teeth.
3. 32 An 8 diametral pitch, 18 tooth pinion rotates at 1200 rpm counter, clockwise, It meshes with a gear with a pitch diameter of bin. Determine the rebcity of the driven gear.
15 - A parallel-shaft gearset consists of an 18-tooth helical pinion driving a 32-tooth gear. The pinion has a left-hand helix angle of 20, a normal pressure angle of 25, and a normal module of 3 mm. Evaluate normal circular pitch (mm) A) 2.77 B) 9,425 C) 6.26 D) 0.955 E) 3
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is 2 in. The pinion rotates at 1000 rev/min and transmits 50 hp. The shafts are at 90. Determine the components of the gear tooth force and show these on a sketch of the ge
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is...
Question is in Metric not imperial
MEA35TA/101/0/2019 Question 9 An uncrowned straight-bevel pinion has 30 teeth, a diametral pitch of 6, and a transmission accuracy number of 6. The driven gear has 60 teeth. Both are made of No. 30 cast iron. The shaft angle is 90 . The face width is 1.25 in, the pinion speed is 900 rev/min, and the normal pressure angle is 20.. The pinion is mounted outboard of its bearings: the bearings of the gear...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/in. The gears are grade t steel, through-hardened at 200 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and ngid mounted Assume a lion life ofi will transmitareliability of90%(KR 0.85), and use YN 1.355N 01:8 and Z 1. used...
Desgin
0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
Desgin
0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
Most questions answered within 3 hours.
-
(Expected rate of return and risk) Carter Inc. is evaluating a
security. Calculate the investment’s expected...
asked 1 hour ago -
What specific indicators can point to lack of progress for
African Americans in American society?
asked 2 hours ago -
1-The Electrons in a beam are moving at 2.7×108 m/s in an
electric field of 15000...
asked 3 hours ago -
A gas tank is a vertical cylinder. It has a radius of 1m, a
height of...
asked 3 hours ago -
Accent Software faces the following conditions. All of these
support Accent’s use of a market-penetration pricing...
asked 4 hours ago -
A mathematically inclined friend emails you the following
instructions: "Meet me in the cafeteria the first...
asked 4 hours ago -
A monopoly sells in two countries . The demand curves in the two
countries are p1...
asked 5 hours ago -
A .15kg rubber ball is bounced off a wall. Before hitting the
wall, the ball moves...
asked 6 hours ago -
A manufacturing company preparing to build a new plant is
considering three potential locations for it....
asked 6 hours ago -
B. If compound Y has approximately the same values of solubility
in toluene as compound X,...
asked 6 hours ago -
Oscar Inc. has inventory in Japan valued at 39,051,000 Yen one
year ago. One year ago...
asked 7 hours ago -
If Canada suffered from "fundamental disequilibrium," and its
government choose not to devalue its currency, a...
asked 7 hours ago