Question: A three-phase, 60-Hz, completely transposed transmission line has a length of 100-km and has a series impedance per phase of (0.25+j0.85) ohms/mile and shunt admittance of 5.0*10^-5 Siemens/mile. The transmission line delivers 150 MW at 0.85 lagging power factor to a load connnected to its receiving end. The line-to-line voltage at the receiving end is 138-kV. Note: The Medium Length Line method should be used since it is used for distances between 50 miles to 150 miles.
Determine the following:
(a) Sending-end voltage and current (In Line to neutral)
(b) Sending-end real and reactive power
(c) Total power dissipated in the transmission line.
Question: A three-phase, 60-Hz, completely transposed transmission line has a length of 100-km and has a...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase series impedance of z-0.05 +j0.45 Ω per km, and a per phase shunt admittance of y 3.4x10-6 Siemens per km. The line delivers (at the receiving end) 200 MVA, 0.8 lagging power factor at 220 kV. Now consider two cases: A- Assume that shunt parameters of the transmission line are ignored (i.e. even if this is a medium length transmission line, under...
#2. A 3-phase, 60-Hz transmission line is 140 miles long and has r :0.30 Ohms/mile, x =1.5 Ohms/mile, and the shunt admittance is 7.8 x 100900 mho /mile. The load at the receiving end of the line is 36 MVA at 220 kV and a power factor of 0.90 lagging (i)Find the ABCD parameters of the line. (i)Find the sending end phasor voltage, Vs and phasor current, Is iv)What is the real power, P and the reactive power Q at...
A 50-Hz, three-phase transmission line is 300 km long. It has a total series impedance of 23 + j75 Ohms and a shunt admittance of j500 µS. It delivers 50 MW at 220 kV, with a power factor of 0.88 lagging. Find the voltage at the sending end using: 1) the short line approximation. 2) the medium-length approximation. 3) the long line equation. How accurate are the short- and medium-length approximations for this case?
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω Per Phase and a total shunt admittance ofj5x 10 Ω. It delivers 180 MW at 275 kV and 0.8 power factor lagging to a load connected at the receiving end. Using the medium π model of the line, determine the voltage, current, real power, reactive power and power factor at the sending end of the line.
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05j0.45 2 per km and a per phase shunt admittance ofy = j3.4 x 10-6 siemens per km. The line is 80 km long. Using the nominal r model, determine (a) The transmission line ABCD constants. Find the sending end voltage and current, voltage regulation, the sending end power and the transmission efficiency when the line delivers (b) 200 MVA, 0.8 lagging power factor at 220...
A 230kV three phase transmission line has a per phase series impedance of z=0.05+j0.45ohms per km and a per phase shunt admittance of y= j3.4x10^-6 siemens per km. The line is 80km long. Using the medium line pi model: (a) Determine the transmission line model constants A, B, C, and D (b) Find the sending end (generating) voltage, current and power when the line delivers to a load of 1. 200 MVA with 0.8 lagging power factor at 220 kV...
Question 2: A 120 miles long medium length transmission line operating at 60 Hz delivers 46MW of power to a load with 0.707 power factor lagging. If the receiving end voltage is 69 KVLL, and line parameters are: r= 0.15 S2/Km, x=0.70 S2/Km, and y= 5.2 uS/Km, use nominal a model for the line and calculate the following values: a) Series impedance and shunt admittance of the line, b) Sending end voltage and current (Vs, Is) c) The voltage regulation...
A three-phase lossless line is operating at 60 Hz and has 300 miles length. The series impedance of the line is 0.8and the shunt admittance is 5.1x10- supports the surge impedance load at the receiving end terminal, find . If the line om om a) b) Voltage, current, real and reactive power at the sending end terminal Voltage regulation
Show the solution for the following problem 1. A short, 230 kV transmission line has an impedance of 5 cis 78 ohms. The load at the receiving end is 100 MW at 230 kV, 85% lagging power factor. What is the voltage at the sending end? a. 235.43 kV b. 226.3 kV c. 231.78 kV d. 238.21 kV 2. A 66 kv medium length transmission line delivers a load of 10 MW at 66 kv and 80% lagging P.F. the...
Given a 3-transmission line with a series impedance z 0.17+ jo.79 2/mile, and a shunt admittance y j2.10*mile The line is 150 mile long, and delivers to the load (receiving-end) 15 MW at 132 kV, at a power factor PF1. Assume medium length line, and calculate the power angle 012 between the sending-end voltage and the receiving-end voltage.