Homework Answers
Feel free to ask any question but remember to rate the
answer.
Add Answer to:
b) Specify the diameter of a round column 1.5 m long that is to carry a...
please help with steps to solve this problem Figure 2 [25] QUESTION 3 A pinned-pinned round...
please help with steps to solve this problem
Figure 2 [25] QUESTION 3 A pinned-pinned round bar is to be 4m long. It is subjected to a purely axial load. Determine the diameter of the bar and determine the maximum load that it can carry if the bar is made of steel with yield strength of 280 MPa and an elastic modulus of 207 GPa. The safety factor on yield should not exceed 1.5. The moment of inertia for a...
Question #2 (30 points) A solid rectangular column has the dimensions and properties below. Determine if...
Question #2 (30 points) A solid rectangular column has the dimensions and properties below. Determine if it is a Johnson or an Euler column and find the critical load: (a) If its boundary conditions are pinned- pinned. (b) If its boundary conditions are fixed-free. Length of column L - 120 mm Thickness = 5 mm Height = 10 mm Material Steel Yield strength Sy = 305 MPa Modulus of elasticity E = 207 GPa 2 * 20 7
Determine the amount of axial force (in N) to cause buckling-failure for a Long or Intermediate...
Determine the amount of axial force (in N) to cause buckling-failure for a Long or Intermediate Column. (Hint: Only two buckling methods, Euler or Johnson, but determine whicl method you need to use first using determining equation) Data: Cross-Section is a hollow Cylinder with an outer diameter of 40 mm and inner diameter of 38 mm. Length of the column is 1.5 meters. Material is a Steel with a young's modulus of 207 GPa. Yield strength of 280 MPa Boundary...
Part A - Maximum load A column is made from a rectangular bar whose cross section...
Part A - Maximum load A column is made from a rectangular bar whose cross section is 5.1 cm by 8.9 cm . If the height of the column is 2 m , what is the maximum load it can support? The material has E = 200 GPa and σY = 250 MPa . Express your answer with appropriate units to three significant figures. Pmax = ?? Part B - Maximum length A circular column with diameter 9.4 cm is...
QUESTIONS A truss frame consists of members AB, BC and AC which are made of 25...
QUESTIONS A truss frame consists of members AB, BC and AC which are made of 25 mm diameter rods. 1. All the joints are pinned. The joint A is pinned to a wall and the joint B is set into a roller which is free to move vertically. The frame supports a point load, P, which is applied at C, as shown in Figure Q1. If the modulus of elasticity of all structures is 210 GPa, yield stress is 200...
100 KN 150 mm 450 mm ΑΙ B G С The three cylinder rods made of...
100 KN 150 mm 450 mm ΑΙ B G С The three cylinder rods made of A-36 steel and have equal cross-sectional areas support a vertical load of 100kN as shown. The bar ABC is fully rigid. Determine: a) The force at A, B and C. b) The diameter of the rods consider safety factor of 1.5, rounded to the nearest even number. c) The displacement of point A, B, C. A 36 steel, Modulus of elasticity E = 200...
(b) A thin-walled pipe of 10 cm diameter is used to carry hot steam at a pressure of 2.5 MPa. The pipe is made with a steel with Young's modulus of 200 GPa, yield strength of 1000 MPa and fra...
(b) A thin-walled pipe of 10 cm diameter is used to carry hot steam at a pressure of 2.5 MPa. The pipe is made with a steel with Young's modulus of 200 GPa, yield strength of 1000 MPa and fracture toughness (Kic) of 2.85x10 Nm32. Determine the minimum thickness of the pipe using the leak-before-break criterion assuming a semi-circular shape of the cracks in the vessel wall and a safety factor of 9. [7 marks]
(b) A thin-walled pipe of...
A 500 mm diameter and 20 m long concrete pile is driven into the ground. The...
A 500 mm diameter and 20 m long concrete pile is driven into the ground. The soil profile at the site consists of 5.0 m of sand ( 35 and y- 19.0 kN/m) at the top, underlain by a thick layer of clay (c,- 50 kPa and y- 19.0 kN/m). Determine the maximum load that can be allowed on the pile with a safety factor of 2.5 Assuming an average Young's modulus of 35 MPa and Poisson's ratio of 0.2...
the hollow tube down has an outside diameter of 45 mm and an inside diameter of...
the hollow tube down has an outside diameter of 45 mm
and an inside diameter of 40 mm. the tube is made of an aluminum
alloy with a minimum yield strength of 280 MPa. the bending load is
F =1.5 kN, the axial load is P = 10kN and the twisting moment is T
= 70 N-m. Determine the factor of safety based on the stress at
point A using (a) the maximum shear stress theory and (b) the
distortion...
A steel pipe column has a length L=4.25 m and has tubular cross section with inside...
A steel pipe column has a length L=4.25 m and has tubular cross section with inside diameter dy=64 mm and outside diameter d2=90 mm. The column is fixed at the base and pinned at the top. The modulus of elasticity of steel is E=210 GPa. The theoretical Euler buckling load of the column is most nearly: dy dz A. 720 KN B. 560 kN C. 303 kN D. 690 KN The steel post has a length L=4 m and carries...
please help with steps to solve this problem
Figure 2 [25] QUESTION 3 A pinned-pinned round bar is to be 4m long. It is subjected to a purely axial load. Determine the diameter of the bar and determine the maximum load that it can carry if the bar is made of steel with yield strength of 280 MPa and an elastic modulus of 207 GPa. The safety factor on yield should not exceed 1.5. The moment of inertia for a...
Question #2 (30 points) A solid rectangular column has the dimensions and properties below. Determine if it is a Johnson or an Euler column and find the critical load: (a) If its boundary conditions are pinned- pinned. (b) If its boundary conditions are fixed-free. Length of column L - 120 mm Thickness = 5 mm Height = 10 mm Material Steel Yield strength Sy = 305 MPa Modulus of elasticity E = 207 GPa 2 * 20 7
Determine the amount of axial force (in N) to cause buckling-failure for a Long or Intermediate Column. (Hint: Only two buckling methods, Euler or Johnson, but determine whicl method you need to use first using determining equation) Data: Cross-Section is a hollow Cylinder with an outer diameter of 40 mm and inner diameter of 38 mm. Length of the column is 1.5 meters. Material is a Steel with a young's modulus of 207 GPa. Yield strength of 280 MPa Boundary...
QUESTIONS A truss frame consists of members AB, BC and AC which are made of 25 mm diameter rods. 1. All the joints are pinned. The joint A is pinned to a wall and the joint B is set into a roller which is free to move vertically. The frame supports a point load, P, which is applied at C, as shown in Figure Q1. If the modulus of elasticity of all structures is 210 GPa, yield stress is 200...
100 KN 150 mm 450 mm ΑΙ B G С The three cylinder rods made of A-36 steel and have equal cross-sectional areas support a vertical load of 100kN as shown. The bar ABC is fully rigid. Determine: a) The force at A, B and C. b) The diameter of the rods consider safety factor of 1.5, rounded to the nearest even number. c) The displacement of point A, B, C. A 36 steel, Modulus of elasticity E = 200...
(b) A thin-walled pipe of 10 cm diameter is used to carry hot steam at a pressure of 2.5 MPa. The pipe is made with a steel with Young's modulus of 200 GPa, yield strength of 1000 MPa and fracture toughness (Kic) of 2.85x10 Nm32. Determine the minimum thickness of the pipe using the leak-before-break criterion assuming a semi-circular shape of the cracks in the vessel wall and a safety factor of 9. [7 marks]
(b) A thin-walled pipe of...
A 500 mm diameter and 20 m long concrete pile is driven into the ground. The soil profile at the site consists of 5.0 m of sand ( 35 and y- 19.0 kN/m) at the top, underlain by a thick layer of clay (c,- 50 kPa and y- 19.0 kN/m). Determine the maximum load that can be allowed on the pile with a safety factor of 2.5 Assuming an average Young's modulus of 35 MPa and Poisson's ratio of 0.2...
the hollow tube down has an outside diameter of 45 mm
and an inside diameter of 40 mm. the tube is made of an aluminum
alloy with a minimum yield strength of 280 MPa. the bending load is
F =1.5 kN, the axial load is P = 10kN and the twisting moment is T
= 70 N-m. Determine the factor of safety based on the stress at
point A using (a) the maximum shear stress theory and (b) the
distortion...
A steel pipe column has a length L=4.25 m and has tubular cross section with inside diameter dy=64 mm and outside diameter d2=90 mm. The column is fixed at the base and pinned at the top. The modulus of elasticity of steel is E=210 GPa. The theoretical Euler buckling load of the column is most nearly: dy dz A. 720 KN B. 560 kN C. 303 kN D. 690 KN The steel post has a length L=4 m and carries...
Most questions answered within 3 hours.
-
Sunshine Company only produced one product and has the following
costs:
Number of units produced each...
asked 3 minutes ago -
What must her minimum speed be just as she leaves the top of the
cliff so...
asked 8 minutes ago -
10.2 Calculate the energy that must be absorbed in stopping a
100 tonne airbus airliner travelling...
asked 12 minutes ago -
Q3- What are the pro’s and con’s of using a web farm?
Please no hand
writing,...
asked 18 minutes ago -
For a nonpolar solute, why does the mobile phase strength
increase as the solvent becomes less...
asked 23 minutes ago -
The times per week a student uses a lab computer are normally
distributed, with a mean...
asked 30 minutes ago -
Discuss the topic of Health Care as a right or a
privilege. Articulate both sides? What...
asked 42 minutes ago -
M (OH)2 has Ksp =6.85x10^-12.
part A: what is the solubility of M (OH)2 in
water?...
asked 41 minutes ago -
Fixed costs are expenses that are not affected by consumer
demand, so they can be estimated...
asked 46 minutes ago -
Lead(II) nitrate and ammonium iodide react to form lead(II)
iodide and ammonium nitrate according to the...
asked 42 minutes ago -
IN JAVA!! THANK YOU
Assignment Overview
You are to include both of these recursive assignments in...
asked 45 minutes ago -
1. One way to make sure that your essay will have enough support
is to start...
asked 43 minutes ago