A rigid tank, with volume of 10 cubic meters, contains steam at 275 C and 15...

Question

Question

Answer 1

Answer #1

volume = 10 m, = 104 L. Temp = 275 °C. = 548.0 ok. Pressure(R) 15 bar. - 14.8038 atm. (1 bar -0.986923 atm.) PV RT 14.8038 at

Answer 2

Similar Homework Help Questions

A 10.0-m3 tank contains steam at 275°C and 15.0 bar. The tank and its contents are...

A 10.0-m3 tank contains steam at 275°C and 15.0 bar. The tank and its contents are cooled until the pressure drops to 1.8 bar. Some of the steam condenses in the process. (a) How much heat was transferred from the tank? (b) What is the final temperature of the tank contents? (c) How much steam condensed (kg)?
10 kg of steam is contained at 10 bar in a rigid vessel of volume 2.275...

10 kg of steam is contained at 10 bar in a rigid vessel of volume 2.275 m3. The vessel is cooled until the pressure in the vessel is 7 bar. Calculate the amount of heat removed from the steam.
A rigid container with a volume of 10 cubic meters contains are at 5 degrees C...

A rigid container with a volume of 10 cubic meters contains are at 5 degrees C with a relative humidity of 100%, a pressure of 1 bar, and 0.25kg of liquid water at 5 degrees C. If the container is heated until the mixture reaches a temperature of 80 degrees C, determine the final pressure and relative humidity of mixture. Also, determine the percent of the volume of the container occupied by the liquid at the initial condition, and discuss...

A 1.8-m3 rigid tank contains steam at 220°С

A 1.8-m3 rigid tank contains steam at 220°С. One-third of the volume is in the liquid phase and the rest is in the vapor form. Determine (a) the pressure of the steam, (b) the quality of the saturated mixture, and (c) the density of the mixture.
Homework Example 17 A steam is contained in a rigid tank with a volume of 1...

Homework Example 17 A steam is contained in a rigid tank with a volume of 1 m3. Initially, the pressure and temperature are 7 bar and 500 oC, respectively. The temperature drops due to cooling process. Determine: (1) The temperature at which condensation begins in °C, (2) The fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) The volume in m3 occupied by saturated liquid at the final state? AUM Americon Universily Ot...
SP04 A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a saturated...

SP04 A rigid, poorly insulated tank with a volume of V1.0 m3 initially contains a saturated water vapor (quality of 1.0) at a pressure of 3 bars (300 kPa). The tank is connected to a supply line containing steam at a pressure of pL- 10 bars (1000 kPa) and a temperature of TL 500°C. The valve is opened and 2.0 kg of steam enters the rigid tank, after which the valve is closed. The pressure is measured after the valve...

A rigid tank of 0.5 m^3 volume contains wet steam at 80 C and 1% quality....

A rigid tank of 0.5 m^3 volume contains wet steam at 80 C and 1% quality. The tank is then heated until the water inside becomes saturated vapor. Determine the final temperature and pressure within the tank. Answer: 271 C, 5.588MPa.
10) 550kJ of heat is transferred to to a rigid tank with a 6 cubic meter...

10) 550kJ of heat is transferred to to a rigid tank with a 6 cubic meter volume containing air, initially at 435 kPa and 35 degrees celcius. After the heat addition, the temperature and pressure of the air both rise. How much work is done during this process? (a) 500 kJ (b) O kJ (c) 323 kJ (d) 900 kJ (e) 2400 kJ
A rigid tank initially contains 0.32 kg steam at 4 MPa, superheated by 350°C. Now the...

A rigid tank initially contains 0.32 kg steam at 4 MPa, superheated by 350°C. Now the steam loses heat to the surroundings and the cooling of tank continues until the cylinder contains water at 90°C. Determine; (a) the final pressure and the quality (if mixture), (b) the boundary work, (c) the amount of heat transfer (d) and the total entropy generation if the Tsur=20 °C.

A rigid tank initially contains 0.32 kg steam at 4 MPa, superheated by 350°C. Now the...

A rigid tank initially contains 0.32 kg steam at 4 MPa, superheated by 350°C. Now the steam loses heat to the surroundings and the cooling of tank continues until the cylinder contains water at 200°C. Determine; (a) the final pressure and the quality (if mixture), (b) the boundary work, (c) the amount of heat transfer (d) and the total entropy generation if the Tsur=20 °C