The answer is E A 12,000-N car is raised using a hydraulic lift, which consists of...
A 10,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the initial force that must...
A 14,192-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with incompressible oll with a density of 900 kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 19.3 cm and the narrower arm has a radius of 3 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level....
Need ASAP To inspect a 20, 500 N car, it is raised with a hydraulic lift, if the radius of the small piston is 5.0 cm, and the radius of the large it is position is 10 cm, find the force that must be exerted on the small piston to lift the car.
A 14 500-N car on a hydraulic lift rests on a cylinder with a piston of radius 0.100 m. If a connecting cylinder with a piston of 0.050-m radius is driven by compressed air, what force must be applied to this smaller piston in order to lift the car? A. 3.53E+3 N B. 5.80E+1 N C. 4.13E+3 N D. 1.45E+4 N E. 3.63E+3 N
A hydraulic lift is designed to raise a 900 kg car. If one piston has a radius of 35.0 cm and the other has a radius of 2.00cm, what is the minimum force necessary to lift the car be placed under the car?
A hydraulic car lift has an input piston of radius 2.00 cm and negligible weight. The output piston has a radius of 79.2 cm, and the total load on the output plungers is 18000 N. If the car (output piston) needs to be lifted 1.70 m, what volume of non-compressible hydraulic fluid must be pumped into the system?
PRACTICE IT Use the worked example above to help you solve this problem. In a car lift used in a service station, compressed air exerts a force on a small piston of circular cross section having a radius of r = 4.55 cm. This pressure is transmitted by an incompressible liquid to a second piston of radius 13.7 cm. (a) What force must the compressed air exert on the small piston in order to lift a car weighing 13,300 N?...
S.A hydraulic lift is lifting a car that weighs 14 kN. The area of the piston supporting the car is A, the area of the other piston is A, and the ratio A/A, is 108.5. How far must the small piston be pushed down to raise the car a distance of 2.0 em? [Hint: Consider the work to be done.] A. 2.17 cm B. 14 m A. C. 14 cm D. 2.17 m Hydraulic fluid 7. A clock has a...