Homework Answers
Add Answer to:
A 14,192-N car is raised using a hydraulic lift, which consists of a U-tube with arms...
A 10,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms...
A 10,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the initial force that must...
The answer is E A 12,000-N car is raised using a hydraulic lift, which consists of...
The answer is E
A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800 kg/m^3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at...
Need ASAP To inspect a 20, 500 N car, it is raised with a hydraulic lift,...
Need ASAP
To inspect a 20, 500 N car, it is raised with a hydraulic lift, if the radius of the small piston is 5.0 cm, and the radius of the large it is position is 10 cm, find the force that must be exerted on the small piston to lift the car.
A 14 500-N car on a hydraulic lift rests on a cylinder with a piston of...
A 14 500-N car on a hydraulic lift rests on a cylinder with a piston of radius 0.100 m. If a connecting cylinder with a piston of 0.050-m radius is driven by compressed air, what force must be applied to this smaller piston in order to lift the car? A. 3.53E+3 N B. 5.80E+1 N C. 4.13E+3 N D. 1.45E+4 N E. 3.63E+3 N
A hydraulic car lift has an input piston of radius 2.00 cm and negligible weight. The...
A hydraulic car lift has an input piston of radius 2.00 cm and negligible weight. The output piston has a radius of 79.2 cm, and the total load on the output plungers is 18000 N. If the car (output piston) needs to be lifted 1.70 m, what volume of non-compressible hydraulic fluid must be pumped into the system?
A hydraulic lift is designed to raise a 900 kg car. If one piston has a...
A hydraulic lift is designed to raise a 900 kg car. If one piston has a radius of 35.0 cm and the other has a radius of 2.00cm, what is the minimum force necessary to lift the car be placed under the car?
PRACTICE IT Use the worked example above to help you solve this problem. In a car...
PRACTICE IT Use the worked example above to help you solve this problem. In a car lift used in a service station, compressed air exerts a force on a small piston of circular cross section having a radius of r = 4.55 cm. This pressure is transmitted by an incompressible liquid to a second piston of radius 13.7 cm. (a) What force must the compressed air exert on the small piston in order to lift a car weighing 13,300 N?...
Fluid Pressure in a U-Tube A U-tube is filled with water, and the two arms are capped.(Figure 1) The tube is cylindri...
Fluid Pressure in a
U-Tube
A U-tube is filled with water,
and the two arms are capped.(Figure
1) The tube is cylindrical, and the right arm has
twice the radius of the left arm. The caps have negligible mass,
are watertight, and can freely slide up and down the tube.
The locations of the two
caps at equilibrium are now as given in this figure.
(Figure 4)
The dashed line represents the level of the water in the left
arm....
Pascal’s principle: What force must be exerted on the master cylinder of a hydraulic lift to...
Pascal’s principle: What force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 1800 kg car resting on the slave cylinder? The master cylinder has a 2.00 cm diameter and the slave has a 25.0 cm diameter. Pascal’s principle: A barber’s chair rests on a hydraulic piston 10 cm in diameter. The input side has a piston with cross-sectional area of 10 cm2 which is pumped on using a foot pedal. If...
A U-tube is filled with water, and the two arms are capped.(Figure 1) The tube is...
A U-tube is filled with water, and the two arms are
capped.(Figure 1) The tube is cylindrical, and the right arm has
twice the radius of the left arm. The caps have negligible mass,
are watertight, and can freely slide up and down the tube.
A) If a 1.0-kg-mass block is on the left cap, how much total
mass must be placed on the right cap so that the caps equilibrate
at equal height?
A 10,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the initial force that must...
The answer is E
A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800 kg/m^3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at...
Need ASAP
To inspect a 20, 500 N car, it is raised with a hydraulic lift, if the radius of the small piston is 5.0 cm, and the radius of the large it is position is 10 cm, find the force that must be exerted on the small piston to lift the car.
A hydraulic lift is designed to raise a 900 kg car. If one piston has a radius of 35.0 cm and the other has a radius of 2.00cm, what is the minimum force necessary to lift the car be placed under the car?
PRACTICE IT Use the worked example above to help you solve this problem. In a car lift used in a service station, compressed air exerts a force on a small piston of circular cross section having a radius of r = 4.55 cm. This pressure is transmitted by an incompressible liquid to a second piston of radius 13.7 cm. (a) What force must the compressed air exert on the small piston in order to lift a car weighing 13,300 N?...
Fluid Pressure in a
U-Tube
A U-tube is filled with water,
and the two arms are capped.(Figure
1) The tube is cylindrical, and the right arm has
twice the radius of the left arm. The caps have negligible mass,
are watertight, and can freely slide up and down the tube.
The locations of the two
caps at equilibrium are now as given in this figure.
(Figure 4)
The dashed line represents the level of the water in the left
arm....
A U-tube is filled with water, and the two arms are
capped.(Figure 1) The tube is cylindrical, and the right arm has
twice the radius of the left arm. The caps have negligible mass,
are watertight, and can freely slide up and down the tube.
A) If a 1.0-kg-mass block is on the left cap, how much total
mass must be placed on the right cap so that the caps equilibrate
at equal height?
Most questions answered within 3 hours.
-
Describe the process of nitrogen excretion in the body. List 4
steps and explain each step
asked 25 minutes ago -
Determine the inductance of a solenoid with 670 turns in a
length of 29 cm ....
asked 11 minutes ago -
Summarize the ways through which sales and operations
planning can be integrated. Then, extend your findings...
asked 12 minutes ago -
Label the image to renview the relative resistance of various
microbes to microbial control agents
asked 30 minutes ago -
PLEASE DO BOTH #5 AND #6.
The purpose of the project is to perform a timing...
asked 22 minutes ago -
Power and privilege is best defined as:
a system in which two or more parties work...
asked 26 minutes ago -
Hewlett Packard is considering an investment project that
requires an initial investment of $20 million. The...
asked 31 minutes ago -
9.
While a ball falls to the ground, it accelerates continuously and
so increases its momentum....
asked 45 minutes ago -
The wave functions for two harmonic waves are given by
D1(x,t)
=(0.3m)sin(2.0x−3.0t),
D2(x,t)
=(0.3m)sin(2.0x−3.0t+π/2)
where x...
asked 41 minutes ago -
1 [Run Lengths] Write a function (in Python and numpy) with the
following specification def run_lenths(n,...
asked 41 minutes ago -
Problem 5-22
Yield to Maturity and Yield to Call
Arnot International's bonds have a current market...
asked 43 minutes ago -
Determine the amount of manufacturing overhead given the
following informations:
Depreciation on a factory building
$2,600...
asked 44 minutes ago