Problem 1: For the following centrifugal pump parameters determine (a) the manometric efficiency 5 points] and...
The centrifugal pump as described in Q5.8 is operating with a pre-whirl of 10° (i.e. Ui is inclined by 10° from the radial axis in the rotational direction). The centrifugal pump delivers 0.45 m3/s ofwater when it is running at the angular velocity of ω-1200 rpm Sketch the velocity triangles at inlet and exit of the impeller and hence determine the following items by assuming (a) negligible losses; and (b) Vi enters the impeller with θ| and V2 leaves with...
Question 3 Show that the pressure head rise in the impeller of a centrifugal pump when frictional and other losses in the impeler are neglected, is given by (a) where Vni is the velocity of flow at the inlet, while at the outlet of the backward curved blades, u2, m2, and ßz are the blade velocity, velocity of flow and blade angle, respectively. (4 marks) A centrifugal pump rotating at 1450 rpm discharges 0.015 m'ls of water. Its impeller has...
fluid Q2: A centrifugal pump with an impeller diameter of 220 mm has to pump 0.02 mº/s of brackish water to an RO unit with following performance data at the best efficiency point: impeller speed =3000 rpm, total head= 68 m, net positive suction head=1.8 m, input power=16 hp. Evaluate the performance of a homologous pump with twice the impeller diameter operating at half the impeller speed. (15 Marks) 2016)
Mechanical Lab II. Please answer asap with clear work. Thank you! 1. A centrifugal pump performance data are shown in the following table for water. Pump speed-2500 RPM Pa or P2 (bar) P. or Pi (bar) Volume of water(L Time (sec) Input-Power (W) -0.3 20 60 100 For this data set, calculate the following i. Pump discharge capacity Q (LUs and GPM) ii. Pump head H (m and ft) iii. Fluid power Pr (Watt) iv. Brake power Pb (Watt) v....
3. A centrifugal pump performance data are shown in the following table for water. Pump speed 2500 RPM Pe or P2 (bar) P or Pi (bar) Volume of water (L) Time (sec) Input-Power (W -0.3 20 60 100 For this data set, calculate the following: i. Pump discharge capacity Q (L/s and GPM) ii. Pump head H (m and f) iii. Fluid power Pr(Watt) iv. Brake power Pb (Watt) v. Pump overall efficiency η (%) vi. Flow rate coefficient Ca...
02. centrifugal pump draws benzene at 25°C (sp. weight of benzene 8.59 kN/m) om a tank whose level is 2.6 m below the pump inlet. The atmospheric pressure (abs). The head loss in the suction piping due to friction and minor osses is 0.8 N.m /N. The vapor pressure of benzene is 13.3 kPa (abs). Determine he available net positive suction head (NPSH) and tell f it is acceptable or not. (10 points) Discharge ine Flew 2.6 m What is...
Question of a Question 3 16 points The impeller of a centrifugal pump has the outer diameter of 0.7m the rotational speed 100 rpm, area of the outer periphery 014 m? and angle of the war ovet 2 18the urgereine drawn to the impeller circumference. The flow at the pumpinietis radial and the radial flow velocity is uniform throughout the pump. The pump shapes of water Find - The radial flow velocity at the pump outlet in A4512 3763 -...
6. Determine the setting of a centrifugal pump, given that flow rate = 2.4 m/min; diameter of intake pipe = 160 mm; entrance losses = one velocity head in suction pipe; required NPSH = 42 kPa; water temperature = 30°C N D1, D2 : inlet and outlet diameters of impeller (rotor) b : impeller width 0,6 : inlet and outlet impeller vane angles (degrees) : speed of rotation of impeller (and its driver) in rpm V, V :tangential and radial...
Problem 1: A centrifugal water pump impeller has uniform blade width b = 6 cm, D = 12 cm and D2 = 40 cm. Blade angles are B1 = 40° and B2 = 10°. If the impeller rotates at 900 RPM, estimate (a) the flow rate, (b) the ideal pressure rise, and (c) if the pump efficiency is 85% find the power required.
theavton the ump.if the absolute pressure of the liquid drops below the vapor pressure then cavitation will occur Answer B) False A) True A centrifugal pump delivers water against a net head of 20 meters and a design speed of 1100 rpm. is 10 m/s. he impeller diameter is 0.4 m. Determine manometric efficiency of the pump, if Co2 Intr E) 95% D) 92% A) 85% C) 90% B) 88% Answer In Calculate net head or effective head for Pelton...