4. A cylindrical aluminum specimen having a diameter of \(20 \mathrm{~mm}\) and length of \(210 \mathrm{~mm}\) is deformed elastically in tension with a force of \(48,800 \mathrm{~N},\left(\mathrm{U}_{\mathrm{A} 1}=0.33, \mathrm{E}_{\mathrm{Al}}=69 \mathrm{GPa}\right)\)
Determine the following:
(a) The amount by which this specimen will elongate in the direction of the applied stress.
(b) The change in diameter of the specimen. Will the diameter increase or decrease?
Problem #1 A cylindrical rod of copper (E 110 GPa) having a yield strength of 240 MPa is to be subjected to a load of 6660 N. If the length of the rod is 380 mm, what must the diameter be to allow an elongation of 0.50 mm? A cylindrical specimen of some alloy 8 mm in diameter is stressed elastically in tension. A force of 15,700 N produces a reduction in the specimen diameter of 5 10-3 mm. Compute...
A cylindrical bar of metal having a diameter of 16.5 mm and a length of 183 mm is deformed elastically in tension with a force of 42000 N. Given that the elastic modulus and Poisson's ratio of the metal are 67.1 GPa and 0.34, respectively, determine the following:(a) The amount by which this specimen will elongate (in mm) in the direction of the applied stress. (b) The change in diameter of the specimen (in mm). Indicate an increase in diameter...
A cylindrical bar of metal having a diameter of 19.0 mm and a length of 207 mm is deformed elastically in tension with a force of 53700 N. Given that the elastic modulus and Poisson's ratio of the metal are 67.6 GPa and 0.34, respectively, determine the following: (a) The amount by which this specimen will elongate in the direction of the applied stress.
QUESTION 12 A cylindrical specimen of a metal with with Elastic Modulus. E-69 GPa and Poisson ratio, v.0.33 has a diameter of 20 mm and length of 210 mm. The specimen is deformed elastically in tension with a force of 56.6 kN. Determine the change in diameter of the specimen. Give your answer in mm, correct to three decimal places.
A cylindrical bar of metal having a diameter of (4.726x10^0) mm and a length of (6.0264x10^2) mm is deformed elastically in tension with a force of (1.16x10^4) N. Given that the elastic modulus and Poisson's ratio of the metal are (1.3007x10^2) GPa and (3.3600x10^-1) , respectively, determine the change in diameter of the specimen (in mm). Indicate an increase in diameter with a positive number and a decrease with a negative number. As always use scientific notation in the form...
PLEASE HELP ON STUDY GUIDE FOR MIDTERM! PLEASE SHOW ALL WORK! 2. Two circular rods are loaded in tension along their longitudinal axis. Both rods have a diameter of 20 mm and a length of 150 mm. One bar is made of aluminum and the other is hot pressed silicon nitride (SigN). Both have an applied tensile load of 80 kN. Assume that both materials behave elastically under this loading condition (the aluminum does not plastically deform and the silicon...
Two circular rods are loaded in tension along their longitudinal axis. Both rods have a diameter of 20 mm and a length of 150 mm. One bar is made of aluminum and the other is hot pressed silicon nitride (Si3N4). Both have an applied tensile load of 80 kN. Assume that both materials behave elastically under this loading condition (the aluminum does not plastically deform and the silicon nitride does not fracture) and given the following properties for these materials:EAl= 69 GPa...
rn A specimen of copper having a rectangular cross section 15.2 mm x 19.1 mm is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain. Round off the answer to three significant figures. Answer: 1.394e-3 A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original diameter of 10.2 mm experiences only elastic deformation when a tensile load of 8900 N is applied. Compute the maximum length of...
1. Draw a schematic stress-strain diagram for steel. Make sure you mark all the important points and regions on it. Provide a one-two sentence explanation for each point and region along the diagram. 2. A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa (30 x 10* psi) and an original diameter of 10.2 mm (0.40 In.) will experience only elastic deformation when a tensile load of 8900 N (2000 Ibe) is applied. Compute the maximum length...
Thank you in advance! Question 7 0/20 View Policies Show Attempt History You are viewing Attempt 1 * Incorrect. A cylindrical specimen of some metal alloy 9.0 mm (0.3543 in.) in diameter is stressed elastically in tension. A force of 14200 N (3192 lbf) produces a reduction in specimen diameter of 9 x 10-3 mm (3.543 x 10" 4 in.). Compute Poisson's ratio for this material if its elastic modulus is 100 GPa (14.5 x 100 psi). 0.497 0/20 Question...