Problem 7.2 For the flow through the pipe with an 180 degree elbow and the nozzle...
Water at 60 °F flows through the elbow as shown below and is then injected to the atmosphere through a nozzle (on a horizontal plane). The pipe diameter is Di = 4 in. while the diameter of the exit of the nozzle is D2 = 1 in. At a flow rate of Q = 245 gpm, the gage pressure at the section (1) where the flange locates is Pi = 34 psig. Neglect the weight of the water and elbow,...
Show all work and answer all parts of the problem please. The 45 degree elbow nozzle discharges water into the atmosphere. The cross-sectional area of the elbow is 25 cm2 150 cm2 at the inlet and 25 cm2 at the exit. Velocity at point 1 and 2 are given as 2 m/s and 12 m/s 450 respectively. The gage pressure at 1 is 73 kPa 150 em2 30 cm The elevation difference between the centers of the exit and the...
Water is flowing through a horizontal pipe with diameter, D1, at a velocity, V1, and under a pressure, P1. It enters a 900 reducing bend (Shown in grey in Fig 2) that connects to a vertical pipe of diameter, D2. The inlet of the bend is 50 cm above the exit of the bend (as shown in Fig 2). Axes for positive directions of x and z coordinates are provided. Figure 2 Side view of reducing bend from horizontal to...