pressure is distributed equally
force on small piston / area of small piston = force on big piston / area of big piston
force on small piston / pi * 4^2 = 15000 / pi * 20^2
force on small piston = 600 N
pressure = force / area
pressure = 600 / (pi * 0.04^2)
pressure = 119366.20 Pa
The small piston of a hydraulic lift has a diameter of 8.0 cm, and large piston...
6. A hydraulic lift system has a small piston (r = 10 cm) and a large piston (r = 40 cm). If the force applied to the small piston is 515 N, what is the force exerted by the large piston? If the small piston moves 6 cm, how far does the large piston move? Make sure to draw a diagram of the system.
A hydraulic jack is made with a small piston 1.4 cm in diameter that is used to move a large piston 5.3 cm in diameter. If a man can exert a force of 400 N on the small piston, how heavy a load can he lift with the jack?
he small piston of a hydraulic lift has a cross-sectional area of 3.50 cm2, and its large piston has a cross-sectional area of 200.0 cm2 (please see the figure below). What force must be applied to the small piston for the lift to raise a load of 14.8 kN? (In service stations, this force is usually exerted by compressed air.)
A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston (piston A) of radius RA = 4.75 cm. A second piston (piston B) of radius Rg = 18.52 cm is used at the lift to lift cars. What force must be applied by piston A to lift a 13,617N car with piston B?
A hydraulic press has one piston of diameter 2.0 cm and the other piston of diameter 8.0 cm. What force must be applied to the smaller piston to obtain a force of 1600 N at the larger piston? 1) 6.25 N 2) 25 N 3) 100 N 4) 400 N 5) 1600 N Question 2 (1 point) A penny has a diameter of 19.55 mm, a thickness of 1.55 mm and a mass of 2.500 g. What is the density?...
A hydraulic car lift has an input piston of radius 2.00 cm and negligible weight. The output piston has a radius of 79.2 cm, and the total load on the output plungers is 18000 N. If the car (output piston) needs to be lifted 1.70 m, what volume of non-compressible hydraulic fluid must be pumped into the system?
chnical Physics The area of the large piston in a hydraulic system has a radius of 1.23 inches. The diameter of the small piston 0.85 inches. What force must be applied to the small piston to lift 700 ib on the large piston? Sketch and solve! Show all work!
Consider the hydraulic lift shown in the figure. The small piston has an area A1 of 0.0330 m², and the large piston has an area A2 of 4.00 m². What force F2 will the large piston provide if the small piston is pushed down with a force F1 of 14.0 N? Assume that the fluid used in the lift is incompressible. F2 = Z - A If the small piston Aj is slowly depressed a distance of y1 = 0.200...
A hydraulic press has one piston of diameter 1.5 cm and other piston of diameter 15 cm. What force must be applied to the smaller piston to obtain a force of 2,500 N on the larger piston? 25N 2.5N 30 N 250 N
and a la piston with the The hydraulic lift the figure below) has a small piston with the surface A-0.044 m surface Az -6.0 m F-24 N. 1) What force will the large piston provide if the small piston in a hydraulic lift is moved down as shown in the figure? (Express your answer to two significant figures.) 2) If the wall piston is depressed two significant figures e? (Express your answer to 3) How much work is done in...