Homework Answers
Add Answer to:
1) A spherical storage tank, shown to the right, has an outer diameter of 20 ft....
2.) A large spherical tank contains gas at a pressure of 420 psi. The tank is...
2.) A large spherical tank contains gas at a pressure of 420 psi. The tank is 45 ft in diameter and is constructed of high strength steel having a yield stress in tension of 80 ksi. Determine the required thickness (to the nearest 4 inch) of the wall of the tank if a factor of safety of 3.5 with respect to yielding is required. Next, if the tank thickness is 2.25 in., what is the maximum internal pressure. (Problem 8.2-3)
1. The tank shown is 24 inches long, has 8- inch mean diameter, 0.1-inch wall thickness, and cont...
1. The tank shown is 24 inches long, has 8- inch mean diameter, 0.1-inch wall thickness, and contains 400 psi internal pressure. As part of a processing operation the tank is rapidly spun, which produces a torque of 16000 lb-inch at the section of interest. (a) determine the state of stress in the y-z plane at the point indicated (at the front surface of the tank) and indicate on a square differential element; (b) represent the state of stress on...
A pressurized pipe with an outside diameter of 13.1 in. and a wall thickness of 0.375...
A pressurized pipe with an outside diameter of 13.1 in. and a wall thickness of 0.375 in. is subjected to an axial force of P = 34000 lb and a torque of T = 9400 lb-ft, as shown. If the internal pressure in the pipe is 260 psi, determine the principal stresses (Opl > 002), the maximum in-plane shear stress Tmax, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Opl = i...
2. (15 points) A pressure cylinder with an outer diameter do = 200 mm and wall...
2. (15 points) A pressure cylinder with an outer diameter do = 200 mm and wall thickness t = 6 min carries an internal pressure of 4 MPa. Determine the maximum tangential, radial, longitudinal stresses in the cylinder. What is the maximum shear stress? [Ans: ơttinax-64.73 MPa, ơrr, max-一4.00 MPa, dzina.-30.36 MPa, and Tmax-34.37 MPa.
A pressurized pipe with an outside diameter of 11.35 in and a wall thickness of 0.375...
A pressurized pipe with an outside diameter of 11.35 in and a wall thickness of 0.375 in. is subjected to an axial force of P - 25700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 290 psi, determine the principal stresses (op 1>op 2 ), the maximum in-plane shear stresst max, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Op 1...
Question 6.102 A spherical pressure vessel of ... TRANSF PROBLEMS 6.100 Determine the normal stress in...
Question 6.102 A spherical pressure vessel of ...
TRANSF PROBLEMS 6.100 Determine the normal stress in a basketball of 12-in. diameter and 0.1-in. wall thickness which has been inflated to a gage pressure of 15 psi. 6.101 A spherical gas container made of steel is 20 ft in diameter and has a uniform wall thickness of 16 in. Knowing that the internal pressure is 75 psi, deter mine the maximum normal stress and the maximum shearing stress in the con...
Problem 5. (20 pts) A vertical propane tank with an outside diameter of D 300 mm...
Problem 5. (20 pts) A vertical propane tank with an outside diameter of D 300 mm and a wall-thickness of t-9 mm is subjected to a horizontal force of P 41 kN. The gage pressure inside the tank is 7 MPa. [D-300 mm, te9 mm, P 41 kN] a) Determine the maximum normal stress at point K b) Determine the shear stress produced by the applied force. c) Determine the maximum shear stress in the 3d stress element.
A pressurized pipe with an outside diameter of 13.7 in, and a wall thickness of 0.3125...
A pressurized pipe with an outside diameter of 13.7 in, and a wall thickness of 0.3125 in. is subjected to an axial force of P = 26700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 200 psi, determine the principal stresses >n2), the maximum in-plane shear stress max, and the absolute maximum shear stress Tabs mar on the outside surface of the pipe Answers: II psi. pl psi p2...
Problem 1. A 1 meter inner diameter steel pressure tank with 8 mm wall thickness is...
Problem 1. A 1 meter inner diameter steel pressure tank with 8 mm wall thickness is subject to a internal pressure of 1.5 MPa and due to the piping weight a torsion of 10 N.m is acting as shown in the figure. The length of the cylinder is 3 meters. Determine: The state of stress in the cylinder wall The state of stress if the normal Cartesian system is rotate 25° The principal stress and the principal angle. The maximum...
Problem 1. A I meter inner diameter steel pressure tank with 8 mm wall thickness is...
Problem 1. A I meter inner diameter steel pressure tank with 8 mm wall thickness is subject to a internal pressure of 1.5 MPa and due to the piping weight a torsion of 10 Nm is acting as shown in the figure. The length of the cylinder is 3 meters. Determine: The state of stress in the cylinder wall The state of stress if the normal Cartesian system is rotate 250 The principal stress and the principal angle. The maximum...
2.) A large spherical tank contains gas at a pressure of 420 psi. The tank is 45 ft in diameter and is constructed of high strength steel having a yield stress in tension of 80 ksi. Determine the required thickness (to the nearest 4 inch) of the wall of the tank if a factor of safety of 3.5 with respect to yielding is required. Next, if the tank thickness is 2.25 in., what is the maximum internal pressure. (Problem 8.2-3)
1. The tank shown is 24 inches long, has 8- inch mean diameter, 0.1-inch wall thickness, and contains 400 psi internal pressure. As part of a processing operation the tank is rapidly spun, which produces a torque of 16000 lb-inch at the section of interest. (a) determine the state of stress in the y-z plane at the point indicated (at the front surface of the tank) and indicate on a square differential element; (b) represent the state of stress on...
A pressurized pipe with an outside diameter of 13.1 in. and a wall thickness of 0.375 in. is subjected to an axial force of P = 34000 lb and a torque of T = 9400 lb-ft, as shown. If the internal pressure in the pipe is 260 psi, determine the principal stresses (Opl > 002), the maximum in-plane shear stress Tmax, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Opl = i...
2. (15 points) A pressure cylinder with an outer diameter do = 200 mm and wall thickness t = 6 min carries an internal pressure of 4 MPa. Determine the maximum tangential, radial, longitudinal stresses in the cylinder. What is the maximum shear stress? [Ans: ơttinax-64.73 MPa, ơrr, max-一4.00 MPa, dzina.-30.36 MPa, and Tmax-34.37 MPa.
A pressurized pipe with an outside diameter of 11.35 in and a wall thickness of 0.375 in. is subjected to an axial force of P - 25700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 290 psi, determine the principal stresses (op 1>op 2 ), the maximum in-plane shear stresst max, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Op 1...
Question 6.102 A spherical pressure vessel of ...
TRANSF PROBLEMS 6.100 Determine the normal stress in a basketball of 12-in. diameter and 0.1-in. wall thickness which has been inflated to a gage pressure of 15 psi. 6.101 A spherical gas container made of steel is 20 ft in diameter and has a uniform wall thickness of 16 in. Knowing that the internal pressure is 75 psi, deter mine the maximum normal stress and the maximum shearing stress in the con...
Problem 5. (20 pts) A vertical propane tank with an outside diameter of D 300 mm and a wall-thickness of t-9 mm is subjected to a horizontal force of P 41 kN. The gage pressure inside the tank is 7 MPa. [D-300 mm, te9 mm, P 41 kN] a) Determine the maximum normal stress at point K b) Determine the shear stress produced by the applied force. c) Determine the maximum shear stress in the 3d stress element.
A pressurized pipe with an outside diameter of 13.7 in, and a wall thickness of 0.3125 in. is subjected to an axial force of P = 26700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 200 psi, determine the principal stresses >n2), the maximum in-plane shear stress max, and the absolute maximum shear stress Tabs mar on the outside surface of the pipe Answers: II psi. pl psi p2...
Problem 1. A 1 meter inner diameter steel pressure tank with 8 mm wall thickness is subject to a internal pressure of 1.5 MPa and due to the piping weight a torsion of 10 N.m is acting as shown in the figure. The length of the cylinder is 3 meters. Determine: The state of stress in the cylinder wall The state of stress if the normal Cartesian system is rotate 25° The principal stress and the principal angle. The maximum...
Problem 1. A I meter inner diameter steel pressure tank with 8 mm wall thickness is subject to a internal pressure of 1.5 MPa and due to the piping weight a torsion of 10 Nm is acting as shown in the figure. The length of the cylinder is 3 meters. Determine: The state of stress in the cylinder wall The state of stress if the normal Cartesian system is rotate 250 The principal stress and the principal angle. The maximum...
Most questions answered within 3 hours.
-
1. Which of the following is false about photosynthesis?
A. ATP is the molecule used to...
asked 31 minutes ago -
A simple random sample of size n=64 is obtained from a
population with a mean of...
asked 1 hour ago -
(2 dimensions, 1 object, 2 accelerations)
1) A projectile is thrown with a wind. The wind...
asked 2 hours ago -
Brian makes $34,100 per year. How much can Brian expect to
contribute to FICA taxes in...
asked 3 hours ago -
To buy a new house you must borrow $155,000. To do this you take
out a...
asked 3 hours ago -
Spacely Sprockets is evaluating the construction of a new plant
on land the company purchased for...
asked 4 hours ago -
1. Consider a linear regression model of y on K regressors and
an intercept.
(i) Describe...
asked 4 hours ago -
Enter a balanced equation for the reaction between hydrochloric
acid and sodium sulfite.
Express your answer...
asked 4 hours ago -
Give a regular expression describing the language
{x | x ∈ Σ* and x does not...
asked 4 hours ago -
Masses of 1.0 kg, 2.0 kg, and 3.0 kg are each separately subject
to a net...
asked 4 hours ago -
The mode of philosophical argumentation and thought. How do
philosophers think and write? What is important...
asked 4 hours ago -
At the beginning of the unit, you were asked whether you thought
it was appropriate or...
asked 4 hours ago