Please like the answer if satisfied
6. A second order differential equation d?x/dt+ 5 dx/dt+7x = 7y. State the undamped natural frequ...
Not all second-order systems are designed to give a standard 2"d order response. Consider the power steering for an automobile. The feedback system can be modeled as the block diagram shown in the figure below. For a unit step input A(s), find values of K1 and K2 for which the response w(t) is critically damped and has a steady-state gain of 0.4 unit. Repeat for a damping ratio of 0.7 and a steady-state gain of 0.2 unit. 7) Control Steering...
5. For each of the following, determine if the system is underdamped, undamped, critically damped or overdamped ad sketch the it step response (a) G (s) = (c) G(s)-t 2+68+ (d) G (s) = 36 6. The equation of motion of a rotational mechanical system is given by where θ° and θί are respectively, output and input angular displace- ments. Assuming that all initial conditions are zero, determine (a) the transfer function model. (b) the natural frequency, w natural frequency,...
5. For each of the following, determine if the system is underdamped, undamped, critically damped or overdamped ad sketch the it step response (a) G (s) = (c) G(s)-t 2+68+ (d) G (s) = 36 6. The equation of motion of a rotational mechanical system is given by where θ° and θί are respectively, output and input angular displace- ments. Assuming that all initial conditions are zero, determine (a) the transfer function model. (b) the natural frequency, w natural frequency,...
A certain physical system is described by the 2nd-order ordinary differential equation +6-0. dt (a) Determine the natural frequency, a, of the system (b) Determine the damping ratio, , of the system. (c) Classify the system as undamped, underdamped, critically damped or overdamped.
show steps please 10 A second-order open-loop system with transfer function G(s) = is to be $2+45+10 controlled with unity negative feedback. (a) Derive the error transfer functions E(s) of the closed-loop system subjected to a unit step input, when using a P controller and a PI controller, respectively, in terms P control gain kp, and PI control gains kp and ki, respectively. [7] (b) Determine the steady-state errors in (a). Briefly comment on the differences in control performance by...
Discuss the mathematical requirements for stability in a linear feedback system and state the Routh Stability criterion. (6 marks) (a) The open loop transfer function of a control system with unity feedback is given by: (b) 35 s(1 + Ts) (1 +0.25s) G(s) - Use Routh's criterion to determine the value of T for which the closed loop system is marginally stable. (8 marks) i Use the Nyquist criterion to confirm the values obtained in (i). (8 marks) ii Sketch...
QUESTION 2 Given that a control system has a forward path of G(s) and negative unity feedback and unit- step input is applied to the system. If G(s) is given as: K G(s)= s(s4) Draw the block diagram of the system. a) Derive the closed-loop transfer function of the system. b) If the gain K 6, determine the settling time of the resulting second-order system at 2% c) tolerance band Its corresponding steady state error. d) Sketch the controlled output...
what about the calculation for pole location in part A and gain in part D? help me solve the questions above yes please help me solve all questions » The input-output model of an analog servo motor is given by equation The equivalent zero-order-hold digital model, when sampled at sampling time, T = 0.1 G ($)=- sec, is given by 1 (S) $(s +1) x(k + 1) = "** 0.0952] LO 0.905 "(k) + 0.0952 |u(k) (0.00484] y(k) = [1...
Consider a unity-feedback control system with a PI controller Gpr(s) and a plant G(s) in cascade. In particular, the plant transfer function is given as 2. G(s) = s+4, and the PI controller transfer function is of the forrm KI p and Ki are the proportional and integral controller gains, respectively where K Design numerical values for Kp and Ki such that the closed-loop control system has a step- response settling time T, 0.5 seconds with a damping ratio of...
e c(s) X(s) S+3 B(s) D(s) Kh PROBLEM 1 Consider the system shown in the figure above. Write an expression for signal.Xs) in terms of complex variable s and output signal C(s). a) b) Write the closed-loop transfer fiunction C( for the system. for the system. ) Recalling that for a second-order system such as this, that the closed-loop transfer function has the form damping ratio ?= 0.5 and an undamped natural frequency on-6 rads. T , determine the values...