A brayton cycle with regeneration and intercooling has a pressure ratio of 4 across each compressor while the total pressure ratio across the turbine is 16. Air enters each compressor at 298K while the inlet gas temperature to the turbine is 1200K. If the regenerator effectiveness is 100%, calculate the cycle thermal efficiency from the heat addition and rejection.
Homework Answers
Add Answer to:
A brayton cycle with regeneration and intercooling has a
pressure ratio of 4 across each compressor...
Air enters the compressor of a cold air-standard Brayton cycle with regeneration at 100 kPa, 300...
Air enters the compressor of a cold air-standard Brayton cycle with regeneration at 100 kPa, 300 K, with a volume flow rate of 5 m3/s. The compressor pressure ratio is 8, and the turbine inlet temperature is 1400 K. The turbine and compressor each have isentropic efficiencies of 80% and the regenerator effectiveness is 80%. For the air, k = 1.4 and the ambient temperature is T0 = 300 K. -Determine the thermal efficiency of the cycle. -determine the back...
An ideal Brayton cycle with regeneration is shown below. Note that from 1 to 6, there...
An ideal Brayton cycle with regeneration is shown below. Note
that from 1 to 6, there is a heat rejection process. The pressure
ratio is 10 and the inlet to the compressor is at 300 K and 100
kPa. The maximum temperature is 1100 K. Use air as the working
fluid, and assume constant properties evaluated at 300
K.
(a) Find the net work output and the cycle efficiency assuming
the effectiveness of the regenerator is 100%
(b) Plot the...
Ideal Brayton cycle with heat regeneration has a pressure ration rp-10.4, T1-300K. The effectiveness of the...
Ideal Brayton cycle with heat regeneration has a pressure ration rp-10.4, T1-300K. The effectiveness of the regenerator is 80%. The network output WmF350 kJ/kg and the thermal efficiency of the cycle is nth 54%. Assume that the air is an ideal gas with variable specific heats. al Draw The thermodynamic cycle Ts and Pv Calculate: b/ Turbine work (WT.out) c/ qin, apply the first law of thermodynamic to the system to calculate gout d/ qregen Heat Combustion chambet Turbine Compressor
Thermodynamics 2: STARTING FROM QS 2) 1) In an ideal Brayton cycle air enters the compressor...
Thermodynamics 2: STARTING FROM QS 2) 1) In an ideal Brayton cycle air enters the compressor at T = 300K and P = 1 bar with a volumetric flow rate = 20 m3/s. Air enters the turbine at P = 10 bar and T = 1800K. Find: a) The thermal efficiency b) The backwork ratio c) The net power generation in MW 2) For the same states above consider a cycle where the isentropic efficiency of the compressor and turbine...
Pressure ratio of a Brayton cycle with air operated regenerator 8. The lowest and highest temperatures...
Pressure ratio of a Brayton cycle with air operated regenerator 8. The lowest and highest temperatures of the cycle are 310 K and 1150 K. Adiabatic efficiency of compressor and turbine 75% and 82%, respectively. the efficiency of the regenerator is 65%. The cycle in the T-s diagram Show. Consider the variation of specific temperatures with temperature. a) the temperature of the air at the turbine outlet, b) Net work of the cycle, c) Calculate the thermal efficiency of the...
Help Save & Exit Submit Required information A Brayton cycle with regeneration using air as the...
Help Save & Exit Submit Required information A Brayton cycle with regeneration using air as the working fluid has minimum and maximum temperatures in the cycle are 310 and 1150 K. Assume an isentropic efficiency of 75 percent for the compressor and 82 percent for the turbine and an effectiveness of 68 percent for the regenerator. Use variable specific heats for air a pressure ratio of 7. The Determine the air temperature at the turbine exit. (You must provide an...
Problem 1 A Brayton-cycle power plant takes in air at 100 kPa and 26.7°C. Compression in two stag...
please solve by exact analysis
Problem 1 A Brayton-cycle power plant takes in air at 100 kPa and 26.7°C. Compression in two stages with intercooling, and each stage has a pressure ratio of 2.38 and an efficiency of 84%, with intercooling to 26.7°C The maximum temperature of the cycle is 676.7°C Turbine efficiency is 82%. The turbine and compressor are assumed adiabatic. A regenerator heats the compressed air to 326.7°C before sending it to the combustor. Calculate (a) the back...
1. A regenerative Brayton cycle operates over a pressure ratio of 8. The minimum and maximum...
1. A regenerative Brayton cycle operates over a pressure ratio of 8. The minimum and maximum temperatures in the cycle are 310 K and 1150 K, respectively. Assume an isentropic compressor efficiency of 75%, an isentropic turbine efficiency of 82%, and a regenerator effectiveness of 0.65. Using constant properties (Cp - 1.005 kJ/kgK, k = 1.4), determine: a) The T-s diagram for all processes including the isentropic processes b) The air temperature at the turbine exit c) The specific network...
Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of...
Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of 100 m3/s at 0.8 bar, 280 K. The compressor pressure ratio is 20, and the maximum cycle temperature is 2100 K. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. For a regenerator effectiveness of 86%, determine: (a) the net power developed, in MW. (b) the rate of heat addition in the combustor, in MW. (c)...
Air enters the compressor of a cold air-standard Brayton cycle at 100 kpa, 300 k, with...
Air enters the compressor of a cold air-standard Brayton cycle at 100 kpa, 300 k, with a mass flow rate of 6 kg/s. the compressor pressure ratio is 10, and the turbine inlet temperature is 1400 K. For k = 1.4, calculate a. The thermal efficiency of the cycle b. The back work ratio c. The net power developed, in kW d. Reconsider the above with an ideal regenerator.
An ideal Brayton cycle with regeneration is shown below. Note
that from 1 to 6, there is a heat rejection process. The pressure
ratio is 10 and the inlet to the compressor is at 300 K and 100
kPa. The maximum temperature is 1100 K. Use air as the working
fluid, and assume constant properties evaluated at 300
K.
(a) Find the net work output and the cycle efficiency assuming
the effectiveness of the regenerator is 100%
(b) Plot the...
Ideal Brayton cycle with heat regeneration has a pressure ration rp-10.4, T1-300K. The effectiveness of the regenerator is 80%. The network output WmF350 kJ/kg and the thermal efficiency of the cycle is nth 54%. Assume that the air is an ideal gas with variable specific heats. al Draw The thermodynamic cycle Ts and Pv Calculate: b/ Turbine work (WT.out) c/ qin, apply the first law of thermodynamic to the system to calculate gout d/ qregen Heat Combustion chambet Turbine Compressor
Help Save & Exit Submit Required information A Brayton cycle with regeneration using air as the working fluid has minimum and maximum temperatures in the cycle are 310 and 1150 K. Assume an isentropic efficiency of 75 percent for the compressor and 82 percent for the turbine and an effectiveness of 68 percent for the regenerator. Use variable specific heats for air a pressure ratio of 7. The Determine the air temperature at the turbine exit. (You must provide an...
please solve by exact analysis
Problem 1 A Brayton-cycle power plant takes in air at 100 kPa and 26.7°C. Compression in two stages with intercooling, and each stage has a pressure ratio of 2.38 and an efficiency of 84%, with intercooling to 26.7°C The maximum temperature of the cycle is 676.7°C Turbine efficiency is 82%. The turbine and compressor are assumed adiabatic. A regenerator heats the compressed air to 326.7°C before sending it to the combustor. Calculate (a) the back...
1. A regenerative Brayton cycle operates over a pressure ratio of 8. The minimum and maximum temperatures in the cycle are 310 K and 1150 K, respectively. Assume an isentropic compressor efficiency of 75%, an isentropic turbine efficiency of 82%, and a regenerator effectiveness of 0.65. Using constant properties (Cp - 1.005 kJ/kgK, k = 1.4), determine: a) The T-s diagram for all processes including the isentropic processes b) The air temperature at the turbine exit c) The specific network...
Air enters the compressor of a cold air-standard Brayton cycle at 100 kpa, 300 k, with a mass flow rate of 6 kg/s. the compressor pressure ratio is 10, and the turbine inlet temperature is 1400 K. For k = 1.4, calculate a. The thermal efficiency of the cycle b. The back work ratio c. The net power developed, in kW d. Reconsider the above with an ideal regenerator.
Most questions answered within 3 hours.
-
What is the wavelength, in cm, of a microwave having a frequency
of 3.44 x 10^9...
asked 2 minutes ago -
A new business venture must develop a comprehensive business
plan to borrow money to get started....
asked 4 minutes ago -
Madtack Company uses a job-order costing system and started the month
of March with only one...
asked 6 minutes ago -
Describe how to distinguish true motility from brownian motion
and fluid flow when viewing a wet...
asked 9 minutes ago -
A manufacturer of game controllers is concerned that its
controller may be difficult for left-handed users....
asked 11 minutes ago -
Water at gauge pressure of 3.8 atmospheres at street level
enters an office building at 0.60...
asked 25 minutes ago -
Quick question, I want to know how to convert decimal numbers to
binary number, when i...
asked 46 minutes ago -
You found out that now you are going to receive payments of
$8,500 for the next...
asked 50 minutes ago -
17.
Technician A says that leaking components are usually repaired
rather than replaced. Technician B says...
asked 51 minutes ago -
A) An Operon is:?
1- A gene that affect another gene
transcription.
2. A gene coding...
asked 57 minutes ago -
When opening a file, use this method to determine whether a file
exists before you attempt...
asked 1 hour ago -
Sales total $300,000 when variable costs total $180,000 and
fixed costs are $60,000. Breakeven sales total:...
asked 1 hour ago