Homework Answers
Add Answer to:
Solution:
7. (12 pts) A transformer is rated at 480V / 120V, 1.8kVA. Assume the transformer...
A transformer connected to a 120V (rms) AC line is to supply 12 kV (rms) for...
A transformer connected to a 120V (rms) AC line is to supply 12 kV (rms) for a neon sign. To reduce shock hazard, a fuse is to be inserted in the primary circuit; the fuse is to blow when the rms current in the secondary circuit exceeds 2.0 mA. What is the current (rms) in the primary circuit when the fuse blows?
7. A transformer is rated at 75kVA, with a primary voltage of 32kV. When tested under...
7. A transformer is rated at 75kVA, with a primary voltage of 32kV. When tested under "Full Load" condition, its copper loss is 870W and core loss is 320W. If an industrial load rated at 1500V with a pf = 0.76 is connected to the secondary, determine: a) The transformation ratio. b) Total power loss at "one-third load". c) Efficiency of the transformer at "one-third load". d) Primary and secondary currents at "one-third load".
1. A step down transformer with a turns ratio of 6 to 1 has 120V applied...
1. A step down transformer with a turns ratio of 6 to 1 has 120V applied to its primary coil. A 25Ω load resistor is connected to the secondary coil. Calculate the following (3+2+2 -7 Points) Secondary coil voltage Secondary coil current Primary coil current a. b. c. 2. A step up transformer has a primary coil current of 1SA and an applied voltage of 220V. The secondary coil current is 5A. Calculate the following (3+3+2+2-10 Points) Secondary coil voltage...
Q-1 A 60Hz, 480V/240V,960V A transformer is supplying a 960W passive load at 240V. The resistances...
Q-1 A 60Hz, 480V/240V,960V A transformer is supplying a 960W passive load at 240V. The resistances of the primary side and secondary side of the transformer are 1.092 and 0.252 respectively. If the no load losses of the transfomer is given by P-Vã 4800 W where Vn is the input voltage of the transformer in Volt. Answer the following: a) Calculate transformer efficiency b) Do you allow this transformer to be connected to 240V 50Hz distribution system? Explain. c What...
Solvein pu sysvem 2-10. A 13,800/480 V three-phase Y-A-connected transformer bank consists of thr...
please solve the question in pu sysyem !!!!
Solvein pu sysvem 2-10. A 13,800/480 V three-phase Y-A-connected transformer bank consists of three identical 100-kVA 967/480-V transformers. I is supplied with power directly from a large constant-voltage bus. In the short-circuit test, the recorded values on the high-voltage side for one of these transformers are Isc 12.6 A Pc3300 w (a) If this bank delivers a rated load at 0.85 PF lagging and rated voltage, what is the line-to-line voltage on...
three-phase transformer is rated at 12 kV/135 kV, 100 MVA. It has the following equivalent circuit...
three-phase transformer is rated at 12 kV/135 kV, 100 MVA. It has the following equivalent circuit parameters (referred to the primary winding where appropriate) : • primary resistance R1 = 0.03 ohms, secondary resistance R2’ = 0.04 ohms • primary leakage reactance X1 = 0.1 ohms, secondary leakage reactance X2’ = 0.1 ohms • magnetising reactance XM = 16 ohms, core-loss resistance RC = 200 ohms. In your calculations, you should use the simplified equivalent circuit. i) The transformer is...
Problem 1: The secondary winding of a transformer has a terminal voltage of v, (t) 282.8...
Problem 1: The secondary winding of a transformer has a terminal voltage of v, (t) 282.8 sin 377t V. The turns ratio of the transformer is 100:200 (a0.50) The impedances of this transformer referred to the primary side are The equivalent circuit is shown below lf (a) If the secondary current of the transformer is i,()-7.07sin(3771-36.87) A, what is the primary current of this transformer? (20 points) HINTS: I. Peak values of the secondary voltage and current are specified in...
0% 0 pts) A 100 kVA. I 3 8 2.4 kV step down transformer has the...
0% 0 pts) A 100 kVA. I 3 8 2.4 kV step down transformer has the following parameters (referred to the secondary): Rop-0.08 04m Tn the transformer is 100 ad KVA at 09 pf lagging at 2160 V. Find the voltage applied to the primary side of the transtormer Find the voltage regulation and efficiency 216D Q니 10.3-2400 1002 042to V(52 467 oo62 06 (10 pts) Solve the previous problem using the PU system. Use the rating of the transformer...
A three-phase Yy0 connected transformer has a nominal rating of 250 kVA and a voltage ratio...
A three-phase Yy0 connected transformer has a nominal rating of 250 kVA and a voltage ratio 15:0.4 kV. After conducting the short-circuit test, where the secondary winding is short-circuited, it is found that the primary series resistance is 0.08 pu and the primary series impedance magnitude is 0.1pu. The effect of the parallel branch in the transformer’s equivalent circuit may be neglected. Explain what information ‘Yy0’ gives about the transformer. Draw the per-phase equivalent circuit of the transformer during the...
ECET 212 ELECTRICAL POWER &MOTORS QUESTIONS 1. Transformer regulation can be determined with the formula a....
ECET 212 ELECTRICAL POWER &MOTORS QUESTIONS 1. Transformer regulation can be determined with the formula a. (EPRI-ESEc) / EPRI x100% b. (ENL- EFL)/ EFL x100% c. (IPRI-ESEC) / IPRI×100% d. (INL-IFL) / INL X 100% 2. What is the transformer regulation if the no-load and full-load voltages are 100 V and 95 v respectively? a. 105% b. 10.5% C. 95% d. 5.3% 3. The secondary voltage can rise above its rated value when the load is a. resistive b. capacitive...
A transformer connected to a 120V (rms) AC line is to supply 12 kV (rms) for a neon sign. To reduce shock hazard, a fuse is to be inserted in the primary circuit; the fuse is to blow when the rms current in the secondary circuit exceeds 2.0 mA. What is the current (rms) in the primary circuit when the fuse blows?
7. A transformer is rated at 75kVA, with a primary voltage of 32kV. When tested under "Full Load" condition, its copper loss is 870W and core loss is 320W. If an industrial load rated at 1500V with a pf = 0.76 is connected to the secondary, determine: a) The transformation ratio. b) Total power loss at "one-third load". c) Efficiency of the transformer at "one-third load". d) Primary and secondary currents at "one-third load".
1. A step down transformer with a turns ratio of 6 to 1 has 120V applied to its primary coil. A 25Ω load resistor is connected to the secondary coil. Calculate the following (3+2+2 -7 Points) Secondary coil voltage Secondary coil current Primary coil current a. b. c. 2. A step up transformer has a primary coil current of 1SA and an applied voltage of 220V. The secondary coil current is 5A. Calculate the following (3+3+2+2-10 Points) Secondary coil voltage...
Q-1 A 60Hz, 480V/240V,960V A transformer is supplying a 960W passive load at 240V. The resistances of the primary side and secondary side of the transformer are 1.092 and 0.252 respectively. If the no load losses of the transfomer is given by P-Vã 4800 W where Vn is the input voltage of the transformer in Volt. Answer the following: a) Calculate transformer efficiency b) Do you allow this transformer to be connected to 240V 50Hz distribution system? Explain. c What...
please solve the question in pu sysyem !!!!
Solvein pu sysvem 2-10. A 13,800/480 V three-phase Y-A-connected transformer bank consists of three identical 100-kVA 967/480-V transformers. I is supplied with power directly from a large constant-voltage bus. In the short-circuit test, the recorded values on the high-voltage side for one of these transformers are Isc 12.6 A Pc3300 w (a) If this bank delivers a rated load at 0.85 PF lagging and rated voltage, what is the line-to-line voltage on...
Problem 1: The secondary winding of a transformer has a terminal voltage of v, (t) 282.8 sin 377t V. The turns ratio of the transformer is 100:200 (a0.50) The impedances of this transformer referred to the primary side are The equivalent circuit is shown below lf (a) If the secondary current of the transformer is i,()-7.07sin(3771-36.87) A, what is the primary current of this transformer? (20 points) HINTS: I. Peak values of the secondary voltage and current are specified in...
0% 0 pts) A 100 kVA. I 3 8 2.4 kV step down transformer has the following parameters (referred to the secondary): Rop-0.08 04m Tn the transformer is 100 ad KVA at 09 pf lagging at 2160 V. Find the voltage applied to the primary side of the transtormer Find the voltage regulation and efficiency 216D Q니 10.3-2400 1002 042to V(52 467 oo62 06 (10 pts) Solve the previous problem using the PU system. Use the rating of the transformer...
ECET 212 ELECTRICAL POWER &MOTORS QUESTIONS 1. Transformer regulation can be determined with the formula a. (EPRI-ESEc) / EPRI x100% b. (ENL- EFL)/ EFL x100% c. (IPRI-ESEC) / IPRI×100% d. (INL-IFL) / INL X 100% 2. What is the transformer regulation if the no-load and full-load voltages are 100 V and 95 v respectively? a. 105% b. 10.5% C. 95% d. 5.3% 3. The secondary voltage can rise above its rated value when the load is a. resistive b. capacitive...
Most questions answered within 3 hours.
-
A 0.035 mol sample of a weak acid, HA, is dissolved in 437 mL of
water...
asked 44 seconds from now -
a sample of Ar gas has a volume of 6.30 L with an unknown
pressure. the...
asked 2 seconds from now -
The
serum cholesterol levels of a population of kids follow a normal
distribution with mean 155...
asked 19 minutes ago -
han discusses the racist practice of badlands, a bar
in the Castro
district of San Francisco,...
asked 31 minutes ago -
A sample of final exam scores is normally distributed with a
mean equal to 25 and...
asked 35 minutes ago -
An investor shorts 100 shares of a stock when the share price is
$50 and closes...
asked 39 minutes ago -
LLOP corporation just paid 4$ dividend per share, you expect the
dividend to grow 8% for...
asked 48 minutes ago -
if we subtract 1000 from 0001 is there overflow? (binary)
asked 56 minutes ago -
Hello, I need help with the function below, The language I am
using is Ocaml
open...
asked 58 minutes ago -
Explain how the presence of glucose represses the gal structural
genes?
asked 1 hour ago -
For the reaction CaI2+2AgNO3⟶2AgI+Ca(NO3)2 how many grams of
silver iodide, AgI, are produced from 56.5 g...
asked 1 hour ago -
Write an equation for hydrolysis via acid catalysis.
Using ethyl acetate, ethyl benzoate, ethyl formate or...
asked 1 hour ago