clear handwriting please.
write all steps please.
The flow profile has been defined on the basis of the normal depth and critical depth of the flow as per the given data
Calculations are as follows
Thankyou
clear handwriting please. write all steps please. Problem One: A trapezoidal channel of base width 20...
Q1. For a uniform flow, a trapezoidal channel has a base width b = 8 m and side slopes 11:1V. The channel bottom slope is so = 0.0002 and the Manning roughness coefficient n = 0.016. Compute a) The depth of uniform flow if Q = 14.3 m3/s b) The state of flow. yo У. b= 8 m
A trapezoidal channel with bottom width of 10 m and side slopes of 1V:1.5H is carrying a flow of 80 m3/s. The channel bottom slope is 0.002 and n = 0.015. A dam is planned that will raise the flow depth to 10 m. Compute the flow depth by using standard step method in the channel 250, 500, and 750 m upstream of the dam.
A trapezoidal channel with a bottom width of 8ft and side slopes of 1V:1H is designed for a discharge of 160cfs. If the channel has a slope of 0.002, what will be the water depth if the Manning n is 0.017?
A trapezoidal channel has a bottom width, b, of 10.0 m and a side slope ratio of 3:1. The Manning’s n of the channel is 0.025, and it is laid on a slope of 0.001. If the water depth is 2 m at the downstream end, write and submit an R script to compute the water surface profile for a discharge of 30 m3 /s. Also submit a plot of the water profile in elevation (m) for 1000 m channel...
(c) A trapezoidal channel, as shown below, has a base width b = 6 m and side slopes 1H:1V. The channel bottom slope is S=0.0002 and the Manning roughness coefficient is n=0.014. Compute: a) the depth of uniform flow if Q = 12.1 m3/s b) the state of the flow. Y Y. b = 6 m Fig. Q2c
7. Given the water surface (M2) profile, channel slope is MILD. Drawdown of the water surface occurs with approach to the free overfall For a 90-degree v-notch channel geometry, bed slope 0.0001, a Manning-n of 0.01 and a flow of 0.425 m'/s find (a) the Froude number and flow regime and (b) Critical depth near the free overfall (c) How far upstream does the flow become uniform (d) What is the water depth at this upstream location? M2 NDL DL...
A hydraulic jump is to be formed in a trapezoidal channel with a base width of 20 ft and side slope of 2:1. The upstream depth is 1.25 ft and the flow (Q) is 1000 cfs. Find the downstream depth and the amount of lost head (energy loss) across the jump.
('15 Marks) Question 4 An earth drainage ditch may be approximated a trapezoidal channel has a base width b = 6 m and side slopes 1H:1V. The channel bottom slope is So = 0.0002 and the Manning roughness coefficient is n = 0.014. Compute a) the depth of uniform flow if Q = 6.01 m/s b) the state of flow (25 Marks) Chapter 8 Question 5 brick channel designed to carry 5.5
A trapezoidal channel has a side slope of 1:1 and a bed width of 6.0 m. A hydraulic jump with a height of 0.5 m (i.e. the difference between water surface elevation upstream and downstream of the jump) is encountered in the channel. If the channel has a discharge of 10 m3/s, determine the critical depth in the channel. Plot the momentum curve and determine the flow depth immediately upstream and downstream of the jump.
#4 [5 points] A trapezoidal channel of bottom width 25 ft and side slope 1:2.5 carries a discharge of 450 cfs with a normal depth of 3.5 ft. The elevations at the beginning and end of the channel are 685 and 650 ft., respectively. Determine the length of the channel if n = 0.02. #5 [5 points] Water is flowing at a rate of 4.5 m3/s in a trapezoidal channel whose bottom width is 2.4 m and side slopes are...