ZuoTi.Pro
Question

48. If a 5.6pF capacitor, a 49.3pF capacitor and a 35.5pF capacitor are all connected in...

48. If a 5.6pF capacitor, a 49.3pF capacitor and a 35.5pF capacitor are all connected in series, then what is the total capacitance of this series combination in pico Farads?

50. If the Thevenin equivalent for a circuit is a 5V voltage source in series with a 5.3kΩ resistor, then what is the Norton equivalent current for this circuit in milliamps?

51. If the Norton equivalent for a circuit is a 2.2mA current source in parallel with a 23kΩ resistor, then what is the Thevenin equivalent resistance for this circuit in kilohms?

54. If the Thevenin equivalent for a circuit is a 5V voltage source in series with a 5.3kΩ resistor, then what is the Norton equivalent resistance for this circuit in kilohms?

55. If a 1.3V voltage source is applied across a 2.5kΩ resistor connected in series with a 11.1kΩ resistor and a 15.3kΩ resistor, then what is the voltage across the 2.5kΩ resistor in volts?

60. If a 4.6mA current source, a 49.5kΩ resistor, a 13.4kΩ resistor and a 47.5kΩ resistor are all connected in parallel, then what is the current through the 47.5kΩ resistor in milliamps?

61. If a 9.8pF capacitor is connected in series with a 20.9pF capacitor, then what is the total capacitance of this series combination in pico Farads?

63. If a 3.8mA current source is applied to a 22.6kΩ resistor connected in parallel with a 32.8kΩ resistor, then what is the current through the 22.6kΩ resistor in milliamps?

64. If a 22nH inductor, a 25.3nH inductor and a 14.1nH inductor are all connected in parallel, then what is the total inductance of this parallel combination in nano Henries ?

66. If a resistor has 15 volts across it when 16.87mA flow through it, then what is the value of the power dissipated by this resistor in milliwatts?

70. If a 14.1pF capacitor is connected in parallel with a 22.8pF capacitor and a 4.5pF capacitor, then what is the total capacitance of this parallel combination in pico Farads?

77. If a 9.8kΩ resistor has 0.53mA flowing through it, then what is the value of the voltage across this resistor in volts?

79. If a 28.5pF capacitor is connected in parallel with a 4.6pF capacitor, then what is the total capacitance of this parallel combination in pico Farads?

85. If a 44.8nH inductor is connected in parallel with a 44.1nH inductor, then what is the total inductance of this parallel combination in nano Henries ?

86. What is the magnitude in ohms of the complex impedance, Z, for a 1986Ω resistor in series with a 7.6pF capacitor at 46MHz?

engineering   Electrical-Engineering   
0 0
Add a comment Improve this question Transcribed image text
Next > < Previous
Sort answers by oldest

Homework Answers

Answer #1

5.6 A93 355 ㅔㅔㅔ - - + +1 - 56 49.3 355 = 0227 * = 0.227 1 ls= 44PPdear student, i have authority to solve one question as per HomeworkLib guidelines. So i have solve first question from your given picture. Thank you

0 0
Add a comment
Know the answer?
Add Answer to:
48. If a 5.6pF capacitor, a 49.3pF capacitor and a 35.5pF capacitor are all connected in...
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for? Ask your own homework help question. Our experts will answer your question WITHIN MINUTES for Free.
Similar Homework Help Questions

  • All of them have short answers. 1. If a 19.9mA current source, a 32.6kΩ resistor, a...

    All of them have short answers. 1. If a 19.9mA current source, a 32.6kΩ resistor, a 49.6kΩ resistor and a 42.6kΩ resistor are all connected in parallel, then what is the current through the 42.6kΩ resistor in milliamps? 2. If a 8.9V voltage source is applied across a 43.6kΩ resistor connected in series with a 25.3kΩ resistor, then what is the voltage across the 25.3kΩ resistor in volts? 3. If the Thevenin equivalent for a circuit is a 5.5V voltage...

  • Hello! these should all be pretty short responses, i just want to confirm my answers. Thanks...

    Hello! these should all be pretty short responses, i just want to confirm my answers. Thanks in advance! 1. If a 19.2mA current source, a 41.6kΩ resistor, a 21.7kΩ resistor and a 16.2kΩ resistor are all connected in parallel, then what is the current through the 41.6kΩ resistor in milliamps? 2.If a 14.7mA current source, a 30.9kΩ resistor, a 33.4kΩ resistor and a 46.2kΩ resistor are all connected in parallel, then what is the current through the 33.4kΩ resistor in...

  • A circuit has an ac voltage source and a resistor and capacitor connected in series. There is no inductor.

     A circuit has an ac voltage source and a resistor and capacitor connected in series. There is no inductor. The ac voltage source has voltage amplitude 0.900 kV and angular frequency w = 20.0 rad/s. The voltage amplitude across the capacitor is 0.500 kV. The resistor has resistance R= 0.300 kΩ. Part A What is the voltage amplitude across the resistor? Part B What is the capacitance C of the capacitor? Part C Does the source voltage lag or lead the current? Part D What is the average...

  • A resistor, an inductor, and a capacitor are connected in series to an AC source. The...

    A resistor, an inductor, and a capacitor are connected in series to an AC source. The AC source is operating at the resonance frequency. Which of the following statements are true? Check all that apply. The current is in phase with the driving voltage. The total voltage across the inductor and the capacitor at any instant is equal to zero. The peak voltage across the capacitor is greater than the peak voltage across the inductor. The peak voltage across the...

  • Please do question 524 the power in watts dissipated by the resistor. Hamad Alrobayan ans:4 ource, resistor, 524) Given a series circuit consisting of a DC voltage capacitor, inductor, and switch...

    Please do question 524 the power in watts dissipated by the resistor. Hamad Alrobayan ans:4 ource, resistor, 524) Given a series circuit consisting of a DC voltage capacitor, inductor, and switch which closes at t-o. All elements are initially uncharged. If v-1 volts, R-4 Ohms, C-1/10 Farads, and L-2 Henries. DO NOT determine current. Determine voltage across the INDUCTOR (VL(t)). Any inverse LT requires Stanley met Express any angle in radians. ans:4 Hamad Alrobayan 765 Given th vstem in Fig...

  • An uncharged capacitor and a resistor are connected in series to a source of emf. If...

    An uncharged capacitor and a resistor are connected in series to a source of emf. If emf=9.00 V, capacitance=21.5 ?F, and resistance=127Ω, find (a) the time constant of the circuit. After 1.30 ms, find (b) the charge on the capacitor, (c) the voltage drop across the capacitor, (d) the voltage drop across the resistor, and (e) the current.

  • The discharge curve for a capacitor connected in series with a resistor is shown below, If...

    The discharge curve for a capacitor connected in series with a resistor is shown below, If the capacitance of the capacitor is 22.50 farads, what is the resistance of the resistor? Please calculate the time constant for this circuit. After two time constants what is the potential across capacitor? Please calculate the amount of charge on the capacitor 25.00 minutes after discharge has started, Once capacitor is fully discharged, the charging process begun. How much time, after charging begins, is...

  • Circuit Analysis in Electrical Engineering 4. A resistor and a capacitor are connected in series across a 270-V ac supply. When the frequency is 40 Hz, the current flowing in the circuit is 6.25...

    Circuit Analysis in Electrical Engineering 4. A resistor and a capacitor are connected in series across a 270-V ac supply. When the frequency is 40 Hz, the current flowing in the circuit is 6.25 A. When the frequency is 50 Hz, the current flowing in the circuit is 7.5 A Calculate the resistance and capacitance of the resistor and capacitor respectively. (99.97 μF; 16.798 Ω) If the resistor and capacitor are now connected in parallel across the 60-Hz supply, calculate...

  • Part A: What is the impedance of the circuit? Part B: What is the current amplitude?...

    Part A: What is the impedance of the circuit? Part B: What is the current amplitude? Part C: What is the phase angle of the source voltage with respect to the current? Part D: Does the source voltage lag or lead the current? Part E: What is the voltage amplitude across the resistor? Part F: What is the voltage amplitude across the inductor? Part G: What is the voltage amplitudes across the capacitor? Constants You have a resistor of resistance...

  • J# 10: 29:2018: Monday Show all steps for full credit. 1. What is the resonance frequency...

    J# 10: 29:2018: Monday Show all steps for full credit. 1. What is the resonance frequency of an LC circuit consisting of a capacitor of s microfarads and a 0.06 Henries. inductor? Lc 2. In a RLC series circuit, the rms voltage of the ac power supply is 120 Volts. The frequency is 45 Hertz. It has a resistance of 100 ohms and a capacitance of 60 micro farads and inductance of 65milli henries. Calculate a) the inductive reactance b)...

ADVERTISEMENT
Free Homework Help App
Download From Google Play
Scan Your Homework
to Get Instant Free Answers
Need Online Homework Help?
Ask a Question
Get Answers For Free
Most questions answered within 3 hours.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT