Water flows in a 7.4 cm diameter pipe at a velocity of 0.67 m/s. The mass...
12. Water flows in a 5-cm-diameter pipe at a velocity of 0.75 m/s. The mass flow rate of water in the pipe is a. 353 kg/min b. 75 kg/min c. 37.5 kg/min d. 1.47 kg/min e. 88.4 kg/min 13. Consider incompressible, frictionless flow of water in a vertical piping. The pressure is 240 kPa at 2 m from the ground level. The velocity of water does not change during this flow. The pressure at 15 m from the ground level...
Water flows in a pipe 1.7 cm in diameter and 480 cm long at a velocity of 8.8 m/s. The water enters at 100°C and exits at 80°C. Calculate the rate of heat removal per square centimeter of pipe wall. Neglect frictional losses and kinetic energy.
Water (density = 1000 kg/m3) flows through a 0.30-m-diameter pipe at 1.5m/s. What is the mass flow rate of water?
6A pipe has a cross-sectional diameter of 3 cm, which narrows to 1.5 cm. Water flows into the larger end of the pipe with a velocity of 2 m/s. a. What is the velocity (v) of water through the narrower end? b. If the "flow rate" (R) into the larger end is 10 cm3/s, prove what is the "flow rate" (out) if the pipe is further narrowed from 1.5 cm to 0.75 cm?
Determine the mass flow rate of water through a pipe with a diameter of 3.3 cm when speed at which water travels through the pipe is 1.5 m/s. kg/s
Water flows at 0.67 m/s through a 3.0 cm diameter hose that terminates in a 0.32 cm diameter nozzle. Assume laminar non-viscous steady-state flow. 1) (a) At what speed does the water pass through the nozzle? m/s 2) (b) If the pump at one end of the hose and the nozzle at the other end are at the same height, and if the pressure at the nozzle is 1 atm, what is the pressure at the pump? atm
Water flows in a 20 cm diameter pipe at 5 m/s as shown in Fig.
A.4. It exits by impacting upon a 90- cone and leaves with a
uniform flow of thickness 1 cm around the cone edge.
(a) Calculate the force acting on the cone. (15 marks)
(b) If the flow exits non-uniformly, explain how the movement of
the cone will be affected. (5 marks)
A.4 Water flows in a 20 cm diameter pipe at 5 m/s as shown...
5.16. Water is flowing in a 3-cm-diameter pipe at an average velocity of Uav 2 m/s. Assuming water density of ρ-1000 kg/m 3 and viscosity μ-10-3 N s'm2, calculate the velocity at the center of the pipe, the shear τ at the wall, and the Reynolds number. Assuming laminar flow, calculate friction coefficient C and pressure drop dp/dx.
7. Water flows through a pipe of diameter 1.08m at a velocity of 2m/s. If someone puts a nozzle on the end of the pipe, reducing the diameter to 0.35m, at what speed will the water exit the pipe?. 10. A pipe with a radius of 50 cm has water flowing at 5 m/s. If water goes into a new pipe with radius 33 cm, how much will the pressure decrease? 11. A large dam has a hole that is...
Water flows at speed of 6 m/s through a horizontal pipe of
diameter 3.5 cm. The gauge pressure P1 of the water in the pipe is
1.7 atm. A short segment of the pipe is constricted to a smaller
diameter of 2.4 cm .
What is the gauge pressure of the water flowing through the
constricted segment? Atmospheric pressure is 1.013 × 10^5 Pa. The
density of water is 1000 kg/m^3 . The viscosity of water is
negligible. Answer in...