Air is at 1 atm, 40°C, and 20 percent relative humidity. Water at 22°C is evaporated into this air to produce air at 25°C and 80 percent relative humidity. How much water, in kg H2O/kg dry air, is required and how much cooling, in kJ/kg dry air, has been produced? Use data from the tables.
Please help solve the amount of cooling produced. I believe I am reading the psychrometric chart incorrectly
Air is at 1 atm, 40°C, and 20 percent relative humidity. Water at 22°C is evaporated...
On a summer day the pressure is 1 atm, the temperature is 32°C, and the relative humidity is 95 percent. This air is to be conditioned to 24°C and 60 percent relative humidity. a) Determine the amount of cooling, in kJ, required and b) Water removed, in kg, per 1000 m3 of dry air processed at the entrance to the system. Cooling coils Ti 32С ф,-95% т,-24°C φ2 60% l atm Condensate Cooling coils Ti 32С ф,-95% т,-24°C φ2 60%...
Atmospheric air at 32°C and 70% relative humidity passes through a cooling section in an air-conditioning duct where the air is cooled below its dew point and some of the water is removed. The air then passes over a heating section where heat is added until the final temperature is 22°C and the relative humidity is 45%. Assume the process occurs at constant pressure of 1 atm. Using the psychrometric chart, determine: (a) The amount of water removed in the...
Water entering a wet cooling tower at 35°C at a rate of 100 kg/s is cooled to 22°C in the cooling tower by air that enters the tower at 1 atm, 20°C, and 60% relative humidity and leaves saturated at 30°C. The makeup water of 22°C is supplied to the outlet to make the mass flow rate of the cool water the same as that at the inlet, see Figure Q5. Q.5Water entering a wet cooling tower at 35°C at...
Moist air at 24°C, 1 atm, and 35% relative humidity enters an evaporative cooling unit operating at steady state consisting of a heating section followed by a soaked pad evaporative cooler operating adiabatically. The air passing through the heating section is heated to 45°C. Next, the air passes through a soaked pad exiting with 50% relative humidity. Using data from the psychrometric chart, determine: (a) the humidity ratio of the entering moist air mixture, in kg(vapor) per kg(dry air). (b)...
Moist air at 20° c, 1 atm, and 43% relative humidity and a volumetric flow rate of 900 m/hrs. enters a control volume at steady state and flow along a surface maintained at 65 C, through which heat transfer occurs. Liquid water at 20" C is injected at a rate of 5 kg/hr and evaporates into flowing stream. For the control volume, Wa=0, and kinetic and potential energy effects are negligible. Moist air exits at 32c, 1 atm, (a) draw...
Problem 7 O/5 points (0%) Humid air at 1 atm, 42 °C dry bulb and 55 % relative humidity is cooled at constant pressure to a temperature 9 °C below its dew-point temperature. Sketch the psychrometric diagram for the process and determine the heat transfer from the air o kJ/kg dry air Cooling coils T2 φ2 T1 ф! 101.3 kPa i H-4」+'Condensate Condensate removal Now Problem (resets attempts) Resets Remaining: 10 Attempts Remaining: 10 Submit Problem 7 O/5 points (0%)...
Air enters a cooling section of 40-cm-diameter at 1 atm, 32°C, and 30 percent relative humidity at 18 m/s. Heat is removed from the air at a rate of 1200 kJ/min. Determine: (a) the exit temperature (b) the exit relative humidity of the air (c) the exit velocity.
Moist air at 20°C, 1 atm, and 43% relative humidity and a volumetric flow rate of 900 m/hrs. enters a control volume at steady state and flow along a surface maintained at 65° C, through which heat transfer occurs. Liquid water at 20° C is injected at a rate of 5 kg/hr and evaporates into flowing stream. For the control volume, Wev =0, and kinetic and potential energy effects are negligible. Moist air exits at 32°C, 1 atm. (a) draw...
Moist air at 20°C, 1 atm, and 43% relative humidity and a volumetric flow rate of 900 m²/hrs. enters a control volume at steady state and flow along a surface maintained at 65°C, through which heat transfer occurs. Liquid water at 20°C is injected at a rate of 5 kg/hr and evaporates into flowing stream. For the control volume, Wev=0, and kinetic and potential energy effects are negligible. Moist air exits at 32°C, 1 atm. (a) draw the system schematic...
QUESTION 4 Air at 25 C° and 1 atm has a relative humidity of 20%. Using the psychrometric chart, the absolute humidity is the wet bulb temperature is , dew point is , and humid volume is Note: Take care of units (write the unit)