Select the lightest W shape to support a uniformly distributed load of 80 kN/m and concentrated loads of 26kN located 4.5 m from the end of the beam. The beam is 16 m, Deflection is not to exceed span/280.
Select the lightest W shape to support a uniformly distributed load of 80 kN/m and concentrated...
Problem 2: the most economical (lightest) W shape to support a uniformly distributed load of 4k/ft (This load includes the weight of the beam) on a simply supported span of 25 ft as shown. Assume the yield stress of the steel to be 50 ksi. The deflection limit (Allowable) is Select 360 w 4 kips/ft 25'-0" R 50 kips RB 50 kips
Select the lightest W shape for the loading below. All loads are dead loads and the 2 k/ft includes th beam weight. The steel is A992, the compression flange is supported at the ends and at the concentrated load and C 1.0. The maximum service load deflection cannot exceed 1/1000 of the span. Design for moment and check shear and deflection. Identify what zone the beam is in and check that it does not exceed zone 1 maximum strength. 13...
A steel I-beam with a span of 20 feet will support both a concentrated load of 15 kips at the beam center and a uniformly distributed load of 2 kips/ft along the entire beam length. The steel beam is Grade 50 (Fy= 50,000 psi). i) Calculate for the lightest W-shape section that will safely carry the load, with the depth not to exceed 17 inches. Provide sketches. ii) The analysis is to include (a) bending strength, (b) shear strength, and...
Please refer AISC 15th edition 2. Select the lightest W shape to carry a uniformly distributed dead load of 0.5 kips/ft and a live load of 1.0 kips/ft on a simply supported span of 42 ft. Adequate lateral support is provided. The live load deflection is limited to 360, Use A572 Grade 50 steel and LRFD. (credit weight 30)
Please refer AISC 15th edition 2. Select the lightest W shape to carry a uniformly distributed dead load of 0.5 kips/ft and a live load of 1.0 kips/ft on a simply supported span of 42 ft. Adequate lateral support is provided. The live load deflection is limited to 360, Use A572 Grade 50 steel and LRFD. (credit weight 30)
16.6a) A simply supported beam is to span 15 ft. It will support a uniformly distributed load of 2 kips/ft over the full span and a concentrated load of 60 kips at mid-span. What is the required plastic section modulus Zx? (Include self-weight) 16.6b) A simply supported beam is to span 15 ft. It will support a uniformly distributed load of 2 kips/ft over the full span and a concentrated load of 60 kips at mid-span. Deflection is not to...
A simple beam supports two concentrated loads and a uniformly distributed load over 8 ft. of the span. Solve for the support reactions at A and B CONSTRUCTION MANAGEMENT TEXAS RLINGTON Assignment #1 FALL 2018 Q4. A simple beam supports two concentrated loads and a uniformly distributed load over 8 ft. of the span. Solve for the support reactions at A and B. 200 Ib 300 lb. 00- 50 lb./ft. 3' 6' 8 Page 5 of 11
Problem 2 Consider a simply supported symmetric I beam ABCD carrying a uniformly distributed load w and a concentrated load F as shown in Figure 2. Young's modulus of the beam is 200 GPa. F 8 kN 8cm 3cm 3cm 7 m 5 m 3 m 2cm W= 6 kN/m 6cm A D B 2cm 7TITT TITIT Figure 2 1) Replace the support C with the reaction force Rc, and using static equilibrium find the reactions at point A and...
Problem 2 Consider a simply supported symmetric I beam ABCD carrying a uniformly distributed load w and a concentrated load F as shown in Figure 2. Young's modulus of the beam is 200 GPa F- 8 kNN 8cm 3cm 3cm w- 6 kN/m 6cm 2cm Figure 2 1) Replace the support C with the reaction force Rc, and using static equilibrium find the reactions at point A and B in terms of Ro 2) Using the boundary conditions, calculate the...
A simply supported beam (B-2) supports a uniformly distributed load and is braced at five-foot intervals in addition to a composite slab that is secured to the compression flange of the beam via shear studs. Assume that the beam is made of ASTM A992 grade with Fy = 50 ksi. Select the lightest W shape to safely support the following loads: DL = 225 psf LL = 150 psf Beams are spaced at 10' o.c. 8.25*: A simply supported beam...